Air Intake Systems

Keep the flame of adventure lit and dominate the dirt with an Airaid performance cold air intake system. This air intake system features an enclosed air box to help protect the filter and inlet from the heat of the engine bay. This system also includes a washable, reusable oiled SYNTHAFLOW air filter designed to capture contaminants and provide top-quality engine protection. This simple-to-install, sophisticated system helps maintain proper air-to-fuel ratios, and eliminates the need for recalibration after installation. Just bolt it on and go and enjoy your new horsepower gains. Not legal for sale or use on any pollution controlled vehicle in California.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2019-2023 Ford Ranger Lariat 2019-2023 Ford Ranger XL 2019-2023 Ford Ranger XLT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1User 1This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005 Ford F-250 Super Duty Harley-Davidson Edition 2005-2007 Ford F-250 Super Duty King Ranch 2005-2007 Ford F-250 Super Duty Lariat 2005-2007 Ford F-250 Super Duty XL 2005-2007 Ford F-250 Super Duty XLT 2005 Ford F-350 Super Duty Harley-Davidson Edition 2005-2007 Ford F-350 Super Duty King Ranch 2005-2007 Ford F-350 Super Duty Lariat 2005-2007 Ford F-350 Super Duty XL 2005-2007 Ford F-350 Super Duty XLT

The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2005 Ford Ranger Edge 2005-2009 Ford Ranger FX4 2006-2011 Ford Ranger Sport 2006-2007 Ford Ranger STX 2004 Ford Ranger Tremor 2005-2011 Ford Ranger XL 2004-2011 Ford Ranger XLT

All black components, a black powder-coated aluminum intake tube, and an oil-free SYNTHAMAX synthetic filter make the AIRAID MCAD intake system your engine's new best friend - providing an increase in both horsepower and torque. The MCAD removes the stock intake track on your vehicle, and adds an open-element air inlet protected by cold air dam panels, which help protect the filter from hot under-hood air. The innovative filter design of layered, low-restriction 3D dry synthetic media offers increased airflow and outstanding protection from contaminants that can cause engine damage and is also washable and reusable. The MCAD intake system is designed to mount in the factory location with no drilling required, and installation can typically be completed in less than 90 minutes using standard hand tools. Engineered for durability, you can buy with confidence under AIRAID's "No-Hassle" Lifetime Limited Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications at to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2019 Ford F-250 Super Duty King Ranch 2017-2019 Ford F-250 Super Duty Lariat 2017-2019 Ford F-250 Super Duty Platinum 2017-2019 Ford F-250 Super Duty XL 2017-2019 Ford F-250 Super Duty XLT 2017-2019 Ford F-350 Super Duty King Ranch 2017-2019 Ford F-350 Super Duty Lariat 2017-2019 Ford F-350 Super Duty Platinum 2017-2019 Ford F-350 Super Duty XL 2017-2019 Ford F-350 Super Duty XLT

All black components, a black powder-coated aluminum intake tube, and an oil-free SYNTHAMAX synthetic filter make the AIRAID MCAD intake system your engine's new best friend - providing an increase in both horsepower and torque. The MCAD removes the stock intake track on your vehicle, and adds an open-element air inlet protected by cold air dam panels, which help protect the filter from hot under-hood air. The innovative filter design of layered, low-restriction 3D dry synthetic media offers increased airflow and outstanding protection from contaminants that can cause engine damage and is also washable and reusable. The MCAD intake system is designed to mount in the factory location with no drilling required, and installation can typically be completed in less than 90 minutes using standard hand tools. Engineered for durability, you can buy with confidence under AIRAID's "No-Hassle" Lifetime Limited Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications at to determine the legal status for each vehicle.Installation InstructionsUser 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2019 Ford F-150 King Ranch 2015-2019 Ford F-150 Lariat 2015-2019 Ford F-150 Platinum 2016-2019 Ford F-150 SSV 2015-2019 Ford F-150 XL 2015-2019 Ford F-150 XLT

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2016 Ford F-250 Super Duty King Ranch 2011-2016 Ford F-250 Super Duty Lariat 2013-2016 Ford F-250 Super Duty Platinum 2011-2016 Ford F-250 Super Duty XL 2011-2016 Ford F-250 Super Duty XLT 2011-2016 Ford F-350 Super Duty King Ranch 2011-2016 Ford F-350 Super Duty Lariat 2013-2016 Ford F-350 Super Duty Platinum 2011-2016 Ford F-350 Super Duty XL 2011-2016 Ford F-350 Super Duty XLT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2019 Ford Explorer Platinum 2013-2019 Ford Explorer Sport

The AIRAID Air Box System is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This air box system connects to the factory air intake tube. The AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Air Box System is easy to install with common hand tools. Some AIRAID air box systems are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2004 Ford Excursion Eddie Bauer 2000-2004 Ford Excursion Limited 2004 Ford Excursion XLS 2000-2004 Ford Excursion XLT 2004 Ford F-250 Super Duty Harley-Davidson Edition 2004 Ford F-250 Super Duty King Ranch 1999-2004 Ford F-250 Super Duty Lariat 1999-2004 Ford F-250 Super Duty XL 1999-2004 Ford F-250 Super Duty XLT 2004 Ford F-350 Super Duty Harley-Davidson Edition 2003-2004 Ford F-350 Super Duty King Ranch 1999-2004 Ford F-350 Super Duty Lariat 1999-2004 Ford F-350 Super Duty XL 1999-2004 Ford F-350 Super Duty XLT

The AIRAID Classic Performance Air Intake produces more horsepower and acceleration from your engine by replacing the factory air intake tubing and air filter assembly with a low-restriction, high air flow induction system. The restrictive factory paper filter and air box are removed in order to mount a new AIRAID premium air filter in the original air box location. The addition of a steel intake tube further increases air flow boosting torque at the drop of the throttle. The intake tube also accommodates the vehicle's factory emissions control devices such as the mass airflow sensor and breather/vacuum hoses where applicable. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Classic Performance Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1997-2004 Ford Expedition Eddie Bauer 2004 Ford Expedition NBX 2004 Ford Expedition XLS 1997-2004 Ford Expedition XLT 2004 Ford Expedition XLT Sport 1997-2000 Ford F-150 Base 2000-2001 Ford F-150 Harley-Davidson Edition 2001-2003 Ford F-150 King Ranch 1997-2003 Ford F-150 Lariat 1997-2003 Ford F-150 XL 1997-2003 Ford F-150 XLT 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT 1998-2002 Lincoln Navigator Base

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake system offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake system offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2018-2021 Ford F-150 Lariat 2018-2021 Ford F-150 XL 2018-2021 Ford F-150 XLT

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake system offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2020-2021 Ford Expedition King Ranch 2018-2021 Ford Expedition Limited 2020-2021 Ford Expedition Max King Ranch 2018-2021 Ford Expedition Max Limited 2018-2021 Ford Expedition Max Platinum 2018-2021 Ford Expedition Max SSV 2018-2019 Ford Expedition Max XL 2018-2021 Ford Expedition Max XLT 2018-2021 Ford Expedition Platinum 2018-2021 Ford Expedition SSV 2018-2019 Ford Expedition XL 2018-2021 Ford Expedition XLT 2018-2020 Ford F-150 King Ranch 2018-2020 Ford F-150 Lariat 2018-2020 Ford F-150 Limited 2018-2020 Ford F-150 Platinum 2018-2020 Ford F-150 Police Responder 2018-2020 Ford F-150 Raptor 2018-2020 Ford F-150 SSV 2018-2020 Ford F-150 XL 2018-2020 Ford F-150 XLT 2019-2021 Lincoln Navigator Base 2018-2021 Lincoln Navigator Black Label 2018-2021 Lincoln Navigator L Black Label 2020-2021 Lincoln Navigator L Livery 2018-2021 Lincoln Navigator L Reserve 2018-2019 Lincoln Navigator L Select 2018 Lincoln Navigator Premiere 2018-2021 Lincoln Navigator Reserve 2018-2019 Lincoln Navigator Select

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake system offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1User 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2020-2024 Ford Expedition King Ranch 2018-2024 Ford Expedition Limited 2020-2024 Ford Expedition Max King Ranch 2018-2024 Ford Expedition Max Limited 2018-2024 Ford Expedition Max Platinum 2018-2024 Ford Expedition Max SSV 2018-2019,2022 Ford Expedition Max XL 2018-2024 Ford Expedition Max XLT 2018-2024 Ford Expedition Platinum 2018-2024 Ford Expedition SSV 2022-2024 Ford Expedition Timberline 2018-2019,2022 Ford Expedition XL 2023-2024 Ford Expedition XL STX 2018-2024 Ford Expedition XLT 2017-2024 Ford F-150 King Ranch 2017-2024 Ford F-150 Lariat 2017-2023 Ford F-150 Limited 2017-2024 Ford F-150 Platinum 2018-2020,2024 Ford F-150 Police Responder 2017-2024 Ford F-150 Raptor 2017-2020,2024 Ford F-150 SSV 2024 Ford F-150 Tremor 2017-2024 Ford F-150 XL 2017-2024 Ford F-150 XLT 2019-2024 Lincoln Navigator Base 2018-2024 Lincoln Navigator Black Label 2022 Lincoln Navigator L Base 2018-2024 Lincoln Navigator L Black Label 2020-2024 Lincoln Navigator L Livery 2018-2024 Lincoln Navigator L Reserve 2018-2019 Lincoln Navigator L Select 2018 Lincoln Navigator Premiere 2018-2024 Lincoln Navigator Reserve 2018-2019 Lincoln Navigator Select

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Installation InstructionsThis Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

The AIRAID MXP Air Intake System represents the ultimate in AIRAID's cold air induction systems and delivers higher levels of horsepower and acceleration gains for high-performance gas and diesel vehicles. Some AIRAID MXP Air Intakes start with a replacement one-piece roto-molded air box that addresses the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Many MXP Air Intake Systems have a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2019 Ford F-250 Super Duty King Ranch 2017-2019 Ford F-250 Super Duty Lariat 2018-2019 Ford F-250 Super Duty Limited 2017-2019 Ford F-250 Super Duty Platinum 2017-2019 Ford F-250 Super Duty XL 2017-2019 Ford F-250 Super Duty XLT 2017-2019 Ford F-350 Super Duty King Ranch 2017-2019 Ford F-350 Super Duty Lariat 2018-2019 Ford F-350 Super Duty Limited 2017-2019 Ford F-350 Super Duty Platinum 2017-2019 Ford F-350 Super Duty XL 2017-2019 Ford F-350 Super Duty XLT

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower and torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location and utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable and reusable, less restrictive than traditional paper, and assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2013-2014 Ford F-150 FX2 2013-2014 Ford F-150 FX4 2011-2012 Ford F-150 Harley-Davidson Edition 2011-2014 Ford F-150 Lariat 2011 Ford F-150 Lariat Limited 2011-2014 Ford F-150 Platinum 2010-2014 Ford F-150 SVT Raptor 2013-2014 Ford F-150 XLT

AIRAID Modular Intake Tubes (MIT) provide a smooth air way to the throttle body that improves air flow up to an additional 400 CFM over restrictive stock intake tubes in order to give your engine more horsepower and torque. MITs are constructed from cross-linked, high-density polyethylene, built each for a specific vehicle make and model, and can be used to simply replace your stock air intake tube or can be added to an AIRAID Cold Air Dam QuickFit series system. Installation is easy and can be done in only a few minutes with a few simple tools. Mounting hardware is included along with easy-to-follow instructions. Some AIRAID air intake components are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 STX 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake kit offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsInstallation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake kit offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2006 Ford Expedition Eddie Bauer 2006 Ford Expedition King Ranch 2005-2006 Ford Expedition Limited 2005-2006 Ford Expedition XLS 2005-2006 Ford Expedition XLT 2006 Ford Expedition XLT Sport

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake kit offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2020-2021 Ford Expedition King Ranch 2018-2021 Ford Expedition Limited 2020-2021 Ford Expedition Max King Ranch 2018-2021 Ford Expedition Max Limited 2018-2021 Ford Expedition Max Platinum 2018-2021 Ford Expedition Max SSV 2018-2019 Ford Expedition Max XL 2018-2021 Ford Expedition Max XLT 2018-2021 Ford Expedition Platinum 2018-2021 Ford Expedition SSV 2018-2019 Ford Expedition XL 2018-2021 Ford Expedition XLT 2018-2020 Ford F-150 King Ranch 2018-2020 Ford F-150 Lariat 2018-2020 Ford F-150 Limited 2018-2020 Ford F-150 Platinum 2018-2020 Ford F-150 Police Responder 2018-2020 Ford F-150 Raptor 2018-2020 Ford F-150 SSV 2018-2020 Ford F-150 XL 2018-2020 Ford F-150 XLT 2019-2021 Lincoln Navigator Base 2018-2021 Lincoln Navigator Black Label 2018-2021 Lincoln Navigator L Black Label 2020-2021 Lincoln Navigator L Livery 2018-2021 Lincoln Navigator L Reserve 2018-2019 Lincoln Navigator L Select 2018 Lincoln Navigator Premiere 2018-2021 Lincoln Navigator Reserve 2018-2019 Lincoln Navigator Select

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake kit offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007-2008 Ford F-150 FX2 2004-2008 Ford F-150 FX4 2006-2008 Ford F-150 Harley-Davidson Edition 2005-2008 Ford F-150 King Ranch 2004-2008 Ford F-150 Lariat 2008 Ford F-150 Limited 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2008 Ford F-150 XL 2004-2008 Ford F-150 XLT 2006-2008 Lincoln Mark LT Base

The AIRAID Jr. Kit targets the restrictive elements of factory intake systems, the intake tube and the paper filter, in order to help boost horsepower and mileage. This air intake kit offers a simple, economical introduction into the performance aftermarket with the introduction of an AIRAID Premium Direct-Fit Replacement Filter and an AIRAID Modular Intake Tube. As with other AIRAID intake systems, the AIRAID Jr. Kit helps to straighten and improve clean air flow to the engine for added throttle response and increased horsepower and torque. Each kit is custom made to fit specific vehicles and is easy to install and requires no drilling. Unlike stock paper filters, AIRAID Direct-Fit Replacement Filters are washable, reusable and fully backed by the AIRAID No-Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the product's vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2011-2014 Ford F-150 FX2 2011-2014 Ford F-150 FX4 2011-2014 Ford F-150 King Ranch 2011-2014 Ford F-150 Lariat 2013-2014 Ford F-150 Limited 2011-2014 Ford F-150 Platinum 2011-2014 Ford F-150 XL 2011-2014 Ford F-150 XLT

The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010 Ford F-150 FX2 2009-2010 Ford F-150 STX 2009-2010 Ford F-150 XL 2009-2010 Ford F-150 XLT

The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007-2008 Ford Explorer Eddie Bauer 2007-2008 Ford Explorer Limited 2007-2008 Ford Explorer XLT 2008,2010 Ford F-150 FX2 2007-2010 Ford F-150 STX 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2007-2010 Ford F-150 XL 2007-2010 Ford F-150 XLT

The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005 Ford Excursion Eddie Bauer 2005 Ford Excursion Limited 2005 Ford Excursion XLS 2005 Ford Excursion XLT 2005-2007 Ford F-250 Super Duty Harley-Davidson Edition 2005-2007 Ford F-250 Super Duty King Ranch 2005-2007 Ford F-250 Super Duty Lariat 2005-2007 Ford F-250 Super Duty XL 2005-2007 Ford F-250 Super Duty XLT 2005-2007 Ford F-350 Super Duty Harley-Davidson Edition 2005-2007 Ford F-350 Super Duty King Ranch 2005-2007 Ford F-350 Super Duty Lariat 2005-2007 Ford F-350 Super Duty XL 2005-2007 Ford F-350 Super Duty XLT 2005-2007 Ford F-450 Super Duty Lariat 2005-2007 Ford F-450 Super Duty XL 2005-2007 Ford F-450 Super Duty XLT 2005-2007 Ford F-550 Super Duty Lariat 2005-2007 Ford F-550 Super Duty XL 2005-2007 Ford F-550 Super Duty XLT

The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.Installation InstructionsThis Part Fits: Year Make Model Submodel 1999-2001 Ford Mustang Base

The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.Installation InstructionsThis Part Fits: Year Make Model Submodel 1987-1992 Ford Bronco Custom 1987-1992 Ford Bronco Eddie Bauer 1990-1992 Ford Bronco XL 1987-1992 Ford Bronco XLT 1992 Ford Bronco XLT Nite 1995-1996 Ford E-150 Econoline Club Wagon Chateau 1995-1996 Ford E-150 Econoline Club Wagon Custom 1995-1996 Ford E-150 Econoline Club Wagon XLT 1995-1996 Ford E-350 Econoline Base 1995-1996 Ford E-350 Econoline XL 1995-1996 Ford E-350 Econoline Club Wagon Chateau 1995-1996 Ford E-350 Econoline Club Wagon Chateau HD 1995-1996 Ford E-350 Econoline Club Wagon Custom 1995-1996 Ford E-350 Econoline Club Wagon XL HD 1995-1996 Ford E-350 Econoline Club Wagon XLT 1995-1996 Ford E-350 Econoline Club Wagon XLT HD 1987-1992 Ford F-150 Custom 1995-1996 Ford F-150 Eddie Bauer 1995-1996 Ford F-150 Special 1987-1996 Ford F-150 XL 1993-1996 Ford F-150 XLT 1987-1992 Ford F-150 XLT Lariat

The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 1997-2004 Ford Expedition Eddie Bauer 2004 Ford Expedition NBX 2004 Ford Expedition XLS 1997-2004 Ford Expedition XLT 2004 Ford Expedition XLT Sport 1997-2000 Ford F-150 Base 2000-2001 Ford F-150 Harley-Davidson Edition 2001-2003 Ford F-150 King Ranch 1997-2003 Ford F-150 Lariat 1997-2003 Ford F-150 XL 1997-2003 Ford F-150 XLT 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT 1998-1999 Lincoln Navigator Base

The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.Installation InstructionsThis Part Fits: Year Make Model Submodel 1997-2004 Ford Expedition Eddie Bauer 2004 Ford Expedition NBX 2004 Ford Expedition XLS 1997-2004 Ford Expedition XLT 2004 Ford Expedition XLT Sport 1997-2000 Ford F-150 Base 2001-2003 Ford F-150 King Ranch 1997-2003 Ford F-150 Lariat 1997-2003 Ford F-150 XL 1997-2003 Ford F-150 XLT 2004 Ford F-150 Heritage XL 2004 Ford F-150 Heritage XLT

The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004-2006 Ford F-150 STX 2004-2006 Ford F-150 XL 2004-2006 Ford F-150 XLT

The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2010 Ford Expedition Eddie Bauer 2007-2010 Ford Expedition EL Eddie Bauer 2008-2014 Ford Expedition EL King Ranch 2007-2014 Ford Expedition EL Limited 2011-2014 Ford Expedition EL XL 2007-2014 Ford Expedition EL XLT 2008 Ford Expedition Funkmaster Flex Edition 2006,2008-2014 Ford Expedition King Ranch 2005-2014 Ford Expedition Limited 2011-2014 Ford Expedition XL 2005-2006 Ford Expedition XLS 2005-2014 Ford Expedition XLT 2006 Ford Expedition XLT Sport 2007-2008,2010 Ford F-150 FX2 2004-2010 Ford F-150 FX4 2006-2008,2010 Ford F-150 Harley-Davidson Edition 2005-2010 Ford F-150 King Ranch 2004-2010 Ford F-150 Lariat 2008 Ford F-150 Limited 2009-2010 Ford F-150 Platinum 2010 Ford F-150 SVT Raptor 2008 Ford F-150 THE 60TH ANNIVERSARY EDITION 2004-2010 Ford F-150 XL 2004-2010 Ford F-150 XLT 2009-2010 Ford F-250 Super Duty Cabela's 2008-2009 Ford F-250 Super Duty FX4 2005-2010 Ford F-250 Super Duty King Ranch 2005-2010 Ford F-250 Super Duty Lariat 2005-2010 Ford F-250 Super Duty XL 2005-2010 Ford F-250 Super Duty XLT 2009-2010 Ford F-350 Super Duty Cabela's 2008-2009 Ford F-350 Super Duty FX4 2005-2010 Ford F-350 Super Duty King Ranch 2005-2010 Ford F-350 Super Duty Lariat 2005-2010 Ford F-350 Super Duty XL 2005-2010 Ford F-350 Super Duty XLT 2006-2008 Lincoln Mark LT Base 2008-2013 Lincoln Navigator Base 2008-2013 Lincoln Navigator L 2007 Lincoln Navigator L Luxury 2007 Lincoln Navigator L Ultimate 2007 Lincoln Navigator Luxury 2007 Lincoln Navigator Ultimate

The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.Installation InstructionsThis Part Fits: Year Make Model Submodel 1994-1995 Ford Mustang GT 1995 Ford Mustang GTS 1994-1995 Ford Mustang SVT Cobra

The POWERAID Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm. The spacer utilizes it's unique, patented Helix Bore design to spin the incoming air charge as it passes through the throttle body spacer. The spinning air action boosts the velocity of the incoming air and contributes to better atomization of the air/fuel mixture as the air charge enters the combustion chamber. The end result is more part-throttle torque and improved mid-range power.Installation InstructionsThis Part Fits: Year Make Model Submodel 1987-1993 Ford Bronco Custom 1987-1995 Ford Bronco Eddie Bauer 1990-1995 Ford Bronco XL 1987-1992,1994-1995 Ford Bronco XLT 1993 Ford Bronco XLT Lariat 1992 Ford Bronco XLT Nite 1995 Ford Bronco XLT Sport 1987-1992 Ford F-150 Custom 1995 Ford F-150 Eddie Bauer 1993-1995 Ford F-150 Lightning 1995 Ford F-150 Special 1987-1995 Ford F-150 XL 1993-1995 Ford F-150 XLT 1987-1992 Ford F-150 XLT Lariat