Air Intake Systems

The AEM 21-475P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru Outback XT and Legacy GT models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-475P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2006 Subaru Legacy GT 2005 Subaru Legacy GT Limited 2006 Subaru Legacy GT spec.B 2005-2006 Subaru Outback XT 2005-2006 Subaru Outback XT Limited

The AEM 21-475B Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru Outback XT and Legacy GT models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-475B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2006 Subaru Legacy GT 2005 Subaru Legacy GT Limited 2006 Subaru Legacy GT spec.B 2005-2006 Subaru Outback XT 2005-2006 Subaru Outback XT Limited

The AEM 21-474P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru Impreza WRX and Saab 9-2X models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-474P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005 Saab 9-2X Aero 2002-2005 Subaru Impreza WRX

The AEM 21-474C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Subaru Impreza WRX and Saab 9-2X models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-474C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005 Saab 9-2X Aero 2002-2005 Subaru Impreza WRX

The AEM 21-466C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Toyota Matrix XRS models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-466C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003 Toyota Matrix Base 2003 Toyota Matrix XR 2003 Toyota Matrix XRS

The AEM 21-462R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Toyota MR2 Spyder models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum switching valves. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-462R vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2000-2005 Toyota MR2 Spyder Base

The AEM 21-462B Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Toyota MR2 Spyder models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vacuum switching valves. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-462B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2000-2005 Toyota MR2 Spyder Base

The AEM 21-451R Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Focus SVT models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the MAF and a replacement silicone engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-451R vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2002-2004 Ford Focus SVT

The AEM 21-450C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Focus models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the MAF and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-450C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2000-2003 Ford Focus LX 2000-2003 Ford Focus SE 2000 Ford Focus Sony Limited Edition 2000-2003 Ford Focus ZTS 2002-2003 Ford Focus ZTW 2000-2003 Ford Focus ZX3 2002-2003 Ford Focus ZX5

The AEM 21-448B Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Pontiac Sunfire and Chevrolet Cavalier models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable black and blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-448B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2005 Chevrolet Cavalier Base 2003-2005 Chevrolet Cavalier LS 2003-2005 Chevrolet Cavalier LS Sport 2005 Pontiac Sunfire Base 2003 Pontiac Sunfire GT 2003-2004 Pontiac Sunfire SE

The AEM 21-447B Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Pontiac Sunfire and Chevrolet Cavalier models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the inlet air temperature sensor and a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-447B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1998-2002 Chevrolet Cavalier Base 1998-2002 Chevrolet Cavalier LS 2002 Chevrolet Cavalier LS Sport 1998-1999 Chevrolet Cavalier RS 1999-2002 Chevrolet Cavalier Z24 2000-2002 Pontiac Sunfire GT 2000-2002 Pontiac Sunfire SE

AEM Air Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These air intakes usually include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications.Installation InstructionsThis Part Fits: Year Make Model Submodel 2002 Chrysler Sebring GTC 2002-2003 Chrysler Sebring Limited 2001-2003 Chrysler Sebring LX 2001-2003 Chrysler Sebring LXi 2001-2003 Dodge Stratus R/T 2001-2002 Dodge Stratus SE 2000-2005 Mitsubishi Eclipse GT 2003-2005 Mitsubishi Eclipse GTS 2001-2005 Mitsubishi Eclipse Spyder GT 2003-2005 Mitsubishi Eclipse Spyder GTS

The AEM 21-432P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific vehicle models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-432P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2002 Chrysler Sebring GTC 2002-2003 Chrysler Sebring Limited 2001-2003 Chrysler Sebring LX 2001-2003 Chrysler Sebring LXi 2001-2003 Dodge Stratus R/T 2001-2002 Dodge Stratus SE 2000-2005 Mitsubishi Eclipse GT 2003-2005 Mitsubishi Eclipse GTS 2001-2005 Mitsubishi Eclipse Spyder GT 2003-2005 Mitsubishi Eclipse Spyder GTS

The AEM 21-432C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific vehicle models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-432C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2002 Chrysler Sebring GTC 2002-2003 Chrysler Sebring Limited 2001-2003 Chrysler Sebring LX 2001-2003 Chrysler Sebring LXi 2001-2003 Dodge Stratus R/T 2001-2002 Dodge Stratus SE 2000-2005 Mitsubishi Eclipse GT 2003-2005 Mitsubishi Eclipse GTS 2001-2005 Mitsubishi Eclipse Spyder GT 2003-2005 Mitsubishi Eclipse Spyder GTS

The AEM 21-430P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mitsubishi Eclipse and Eagle Talon models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated near the wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement silicone breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-430P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1996-1998 Eagle Talon Base 1995-1998 Eagle Talon ESi 1995-1998 Eagle Talon TSi 1996-1997 Mitsubishi Eclipse Base 1995-1999 Mitsubishi Eclipse GS 1995-1999 Mitsubishi Eclipse RS

The AEM 21-425C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Neon SRT-4 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray and black finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-425C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2005 Dodge Neon SRT-4

The AEM 21-415B Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Accord models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable blue powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-415B vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1998-2002 Honda Accord DX 1998-2002 Honda Accord EX 1998-2002 Honda Accord LX 2000,2002 Honda Accord SE 2001-2002 Honda Accord Value Package

The AEM 21-413C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic LX, DX and CX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose as well as a replacement water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-413C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1996-2000 Honda Civic CX 1996-2000 Honda Civic DX 1996-2000 Honda Civic LX

The AEM 21-404C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura Integra GS-R models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement engine breather hose and water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-404C vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1994-2001 Acura Integra GS-R 1994-1996 Acura Integra LS 1994-1996 Acura Integra RS 1995-1996 Acura Integra Special Edition

The AEM 21-401P Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic, SI, LX, EX, Del Sol and DX Hatchback models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including a replacement engine breather hose and water bypass hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-401P vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1992-1995 Honda Civic DX 1992-1995 Honda Civic EX 1992-1995 Honda Civic LX 1992-1995 Honda Civic Si 1993-1995 Honda Civic del Sol S 1993-1995 Honda Civic del Sol Si 1994-1995 Honda Civic del Sol VTEC

AEM air bypass valves create a vacuum leak to bypass the air filter in the event that the air filter sucks up water. Air bypass valves are typically installed onto the air intake tube on cold-air intake systems.Installation Instructions

AEM air bypass valves create a vacuum leak to bypass the air filter in the event that the air filter sucks up water. Air bypass valves are typically installed onto the air intake tube on cold-air intake systems.Installation Instructions

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. The precise mandrel-bent aluminum tubing keeps air flow uniform, smooth and free-flowing. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. The precise mandrel-bent aluminum tubing keeps air flow uniform, smooth and free-flowing. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. The precise mandrel-bent aluminum tubing keeps air flow uniform, smooth and free-flowing. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. The precise mandrel-bent aluminum tubing keeps air flow uniform, smooth and free-flowing. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. The precise mandrel-bent aluminum tubing keeps air flow uniform, smooth and free-flowing. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. The precise mandrel-bent aluminum tubing keeps air flow uniform, smooth and free-flowing. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. The precise mandrel-bent aluminum tubing keeps air flow uniform, smooth and free-flowing. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM intake tubes are engineered for racers, builders and fabricators to create custom ducting for turbocharger systems and air intakes. Made from high-quality 6063 aluminum alloy, this tube can be cut, spliced or welded to fit a wide spectrum of custom applications while withstanding high heat and stress.Technical Drawing

AEM Synthetic Air Filter Cleaner loosens and dissolves dirt and grime build up on synthetic filters so they can be rinsed clean with water. This cleaner is perfect for AEM Dryflow air filters and other synthetic air filters.Material Safety Data SheetMaterial Safety Data SheetMaterial Safety Data SheetMaterial Safety Data SheetMaterial Safety Data SheetMaterial Safety Data SheetMaterial Safety Data SheetMaterial Safety Data Sheet

Granatelli 2.0in Tall 5.125in Diameter Carburetor Spacer w/O-Ring Seal

Granatelli 1.75in Tall 5.125in Diameter Carburetor Spacer w/O-Ring Seal

Granatelli 1.5in Tall 5.125in Diameter Carburetor Spacer w/O-Ring Seal