Control Arms

BMR 78-87 G-Body Upper Control Arms DOM Single Adj Rod Ends - Red

BMR 78-87 G-Body Upper Control Arms DOM Single Adj Rod Ends - Black Hammertone

Launching harder, reducing wheel hop, and adding cornering consistency to your 2008-2019 Dodge Challenger is easy with upper control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod ended, on-car adjustable control arms for Challengers (UCA112) are manufactured from heavy-duty 1-inch DOM steel tubing with TIG-welded Chrome-moly tube adapters. This design gives you a strong control arm that eliminates deflection and greatly improves performance. The UCA112 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performanceBMR Suspension designed the UCA112 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The UCA112s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling at any power level. When performance is a must, rely on BMR Suspension!BMR Suspensions UCA112 on-car adjustable upper trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2017-2020 Dodge Challenger GT 2009-2020 Dodge Challenger R/T 2017-2018 Dodge Challenger R/T 392 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016,2019-2020 Dodge Challenger R/T Scat Pack 2020 Dodge Challenger R/T Scat Pack Widebody 2016 Dodge Challenger R/T Shaker 2014 Dodge Challenger Rallye Redline 2015 Dodge Challenger Scat Pack 2009-2011 Dodge Challenger SE 2015-2018 Dodge Challenger SRT 392 2018 Dodge Challenger SRT Demon 2015-2020 Dodge Challenger SRT Hellcat 2019-2020 Dodge Challenger SRT Hellcat Redeye 2020 Dodge Challenger SRT Hellcat Redeye Widebody 2020 Dodge Challenger SRT Hellcat Widebody 2008-2014 Dodge Challenger SRT8 2012-2020 Dodge Challenger SXT 2012,2015-2018 Dodge Challenger SXT Plus 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Challenger T/A 392

Launching harder, reducing wheel hop, and adding cornering consistency to your 2008-2019 Dodge Challenger is easy with upper control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod ended, on-car adjustable control arms for Challengers (UCA112) are manufactured from heavy-duty 1-inch DOM steel tubing with TIG-welded Chrome-moly tube adapters. This design gives you a strong control arm that eliminates deflection and greatly improves performance. The UCA112 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performanceBMR Suspension designed the UCA112 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The UCA112s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling at any power level. When performance is a must, rely on BMR Suspension!BMR Suspensions UCA112 on-car adjustable upper trailing arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2017-2020 Dodge Challenger GT 2009-2020 Dodge Challenger R/T 2017-2018 Dodge Challenger R/T 392 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016,2019-2020 Dodge Challenger R/T Scat Pack 2020 Dodge Challenger R/T Scat Pack Widebody 2016 Dodge Challenger R/T Shaker 2014 Dodge Challenger Rallye Redline 2015 Dodge Challenger Scat Pack 2009-2011 Dodge Challenger SE 2015-2018 Dodge Challenger SRT 392 2018 Dodge Challenger SRT Demon 2015-2020 Dodge Challenger SRT Hellcat 2019-2020 Dodge Challenger SRT Hellcat Redeye 2020 Dodge Challenger SRT Hellcat Redeye Widebody 2020 Dodge Challenger SRT Hellcat Widebody 2008-2014 Dodge Challenger SRT8 2012-2020 Dodge Challenger SXT 2012,2015-2018 Dodge Challenger SXT Plus 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Challenger T/A 392

Launching harder, reducing wheel hop, and adding cornering consistency to your 2008-2017 Dodge Challenger is easy with upper control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod ended, single-adjustable trailing arms for Challengers (UCA111) are manufactured from heavy-duty 1-inch DOM steel tubing. The open end is formed from CNC laser cut, CNC formed 3/16-inch steel plate. This design gives you a strong trailing arm that greatly improves performance. The UCA111 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performanceBMR Suspension designed the UCA111 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The UCA111s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions UCA111 adjustable upper control arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2017-2019 Dodge Challenger GT 2009-2019 Dodge Challenger R/T 2017-2018 Dodge Challenger R/T 392 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016,2019 Dodge Challenger R/T Scat Pack 2016 Dodge Challenger R/T Shaker 2014 Dodge Challenger Rallye Redline 2015 Dodge Challenger Scat Pack 2009-2011 Dodge Challenger SE 2015-2018 Dodge Challenger SRT 392 2018 Dodge Challenger SRT Demon 2015-2019 Dodge Challenger SRT Hellcat 2019 Dodge Challenger SRT Hellcat Redeye 2008-2014 Dodge Challenger SRT8 2012-2019 Dodge Challenger SXT 2012,2015-2018 Dodge Challenger SXT Plus 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Challenger T/A 392

Launching harder, reducing wheel hop, and adding cornering consistency to your 2008-2017 Dodge Challenger is easy with upper control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod ended, single-adjustable trailing arms for Challengers (UCA111) are manufactured from heavy-duty 1-inch DOM steel tubing. The open end is formed from CNC laser cut, CNC formed 3/16-inch steel plate. This design gives you a strong trailing arm that greatly improves performance. The UCA111 features zinc-plated two-piece, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends. It also features 304 stainless steel, custom designed rod end spacers. This design provides reduced deflection, increased articulation, and an all-around improvement in performanceBMR Suspension designed the UCA111 to work well in street performance, drag race, and road race applications. The stock trailing arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The UCA111s heavy-duty construction eliminates trailing arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs rod ends allows for fine-tuning and bind-free suspension articulation needed for superior handling. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions UCA111 adjustable upper control arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 2 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2017-2020 Dodge Challenger GT 2009-2020 Dodge Challenger R/T 2017-2018 Dodge Challenger R/T 392 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016,2019-2020 Dodge Challenger R/T Scat Pack 2020 Dodge Challenger R/T Scat Pack Widebody 2016 Dodge Challenger R/T Shaker 2014 Dodge Challenger Rallye Redline 2015 Dodge Challenger Scat Pack 2009-2011 Dodge Challenger SE 2015-2018 Dodge Challenger SRT 392 2018 Dodge Challenger SRT Demon 2015-2020 Dodge Challenger SRT Hellcat 2019-2020 Dodge Challenger SRT Hellcat Redeye 2020 Dodge Challenger SRT Hellcat Redeye Widebody 2020 Dodge Challenger SRT Hellcat Widebody 2008-2014 Dodge Challenger SRT8 2012-2020 Dodge Challenger SXT 2012,2015-2018 Dodge Challenger SXT Plus 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Challenger T/A 392

Fits all 2008-2019 Dodge Challengers;Designed to the factory length;High-durometer internally fluted polyurethane greasable bushings;MIG-welded 3/16-inch steel plate;Dramatically reduces control arm flex;Greatly reduces bushing deflection;Improved Performance with acceptable NVH levels;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2017-2020 Dodge Challenger GT 2009-2020 Dodge Challenger R/T 2017-2018 Dodge Challenger R/T 392 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016,2019-2020 Dodge Challenger R/T Scat Pack 2020 Dodge Challenger R/T Scat Pack Widebody 2016 Dodge Challenger R/T Shaker 2014 Dodge Challenger Rallye Redline 2015 Dodge Challenger Scat Pack 2009-2011 Dodge Challenger SE 2015-2018 Dodge Challenger SRT 392 2018 Dodge Challenger SRT Demon 2015-2020 Dodge Challenger SRT Hellcat 2019-2020 Dodge Challenger SRT Hellcat Redeye 2020 Dodge Challenger SRT Hellcat Redeye Widebody 2020 Dodge Challenger SRT Hellcat Widebody 2008-2014 Dodge Challenger SRT8 2012-2020 Dodge Challenger SXT 2012,2015-2018 Dodge Challenger SXT Plus 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Challenger T/A 392

Fits all 2008-2019 Dodge Challengers;Designed to the factory length;High-durometer internally fluted polyurethane greasable bushings;MIG-welded 3/16-inch steel plate;Dramatically reduces control arm flex;Greatly reduces bushing deflection;Improved Performance with acceptable NVH levels;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2016 Dodge Challenger 392 Hemi Scat Pack Shaker 2017-2020 Dodge Challenger GT 2009-2020 Dodge Challenger R/T 2017-2018 Dodge Challenger R/T 392 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016,2019-2020 Dodge Challenger R/T Scat Pack 2020 Dodge Challenger R/T Scat Pack Widebody 2016 Dodge Challenger R/T Shaker 2014 Dodge Challenger Rallye Redline 2015 Dodge Challenger Scat Pack 2009-2011 Dodge Challenger SE 2015-2018 Dodge Challenger SRT 392 2018 Dodge Challenger SRT Demon 2015-2020 Dodge Challenger SRT Hellcat 2019-2020 Dodge Challenger SRT Hellcat Redeye 2020 Dodge Challenger SRT Hellcat Redeye Widebody 2020 Dodge Challenger SRT Hellcat Widebody 2008-2014 Dodge Challenger SRT8 2012-2020 Dodge Challenger SXT 2012,2015-2018 Dodge Challenger SXT Plus 2017-2018 Dodge Challenger T/A 2017-2018 Dodge Challenger T/A 392

Launching harder, reducing wheel hop, and adding cornering consistency to your 1999-2004 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, on-car adjustable tubular control arms for New Edge Mustangs (TCA055) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA055 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA055's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. When performance is a must, rely on BMR Suspension!Application GuideThis Part Fits: Year Make Model Submodel 1999-2004 Ford Mustang Base 1999-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 2003-2004 Ford Mustang Mach 1 1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 2000 Ford Mustang SVT Cobra R

Launching harder, reducing wheel hop, and adding cornering consistency to your 1999-2004 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, on-car adjustable tubular control arms for New Edge Mustangs (TCA055) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA055 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA055's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. When performance is a must, rely on BMR Suspension!Application GuideThis Part Fits: Year Make Model Submodel 1999-2004 Ford Mustang Base 1999-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 2003-2004 Ford Mustang Mach 1 1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 2000 Ford Mustang SVT Cobra R

Launching harder, reducing wheel hop, and adding cornering consistency to your 1999-2004 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, single-adjustable tubular control arms for New Edge Mustangs (TCA053) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA053 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA053's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. When performance is a must, rely on BMR Suspension!Application GuideThis Part Fits: Year Make Model Submodel 1999-2004 Ford Mustang Base 1999-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 2003-2004 Ford Mustang Mach 1 1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 2000 Ford Mustang SVT Cobra R

Launching harder, reducing wheel hop, and adding cornering consistency to your 1999-2004 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, single-adjustable tubular control arms for New Edge Mustangs (TCA053) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA053 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA053's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. When performance is a must, rely on BMR Suspension!Application GuideThis Part Fits: Year Make Model Submodel 1999-2004 Ford Mustang Base 1999-2004 Ford Mustang GT 2001 Ford Mustang GT Bullitt 2003-2004 Ford Mustang Mach 1 1999,2001,2003-2004 Ford Mustang SVT Cobra 2003 Ford Mustang SVT Cobra 10th Anniversary 2000 Ford Mustang SVT Cobra R

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, on-car adjustable tubular control arms for Fox Body Mustangs (TCA051) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA051 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA051's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. When performance is a must, rely on BMR Suspension!Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, on-car adjustable tubular control arms for Fox Body Mustangs (TCA051) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA051 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA051's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. When performance is a must, rely on BMR Suspension!Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, single-adjustable tubular control arms for Fox body Mustangs (TCA049) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA049 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA049's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR's polyurethane/rod end, single-adjustable tubular control arms for Fox body Mustangs (TCA049) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR's bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA049 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you're left with poor performance. The TCA049's heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR's polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981,1994-1998 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1998 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1995 Ford Mustang GTS 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993-1998 Ford Mustang SVT Cobra 1993,1995 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Launching harder, reducing wheel hop, and adding cornering consistency to your 1978-1987 GM G-body is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR?s polyurethane, non-adjustable tubular control arms for A-bodies (TCA039) are manufactured from heavy-duty 1? inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance. Two-inch greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which keeps grease in the bushing, even under heavy load. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Launching harder, reducing wheel hop, and adding cornering consistency to your 1978-1987 GM G-body is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR?s polyurethane, non-adjustable tubular control arms for A-bodies (TCA039) are manufactured from heavy-duty 1? inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance. Two-inch greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which keeps grease in the bushing, even under heavy load. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Launching harder, reducing wheel hop, and adding cornering consistency to your 1964-1972 GM A-body is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod end, double-adjustable tubular control arms for GM A-bodies (TCA038) are TIG-welded using heavy-duty DOM steel tubing. This design gives you a strong control arm that greatly improves performance.BMR Suspension designed the TCA038 to excel in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The TCA038s heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs heavy-duty rod ends are designed to solidly link the rearend to the body, eliminate deflection and wasted power. Our rod ends will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling. These are the perfect upgrade for the enthusiast looking to greatly improve performance without NVH levels being a concern. When performance is a must, rely on BMR Suspension!BMR Suspensions TCA038 double-adjustable rod end lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

Launching harder, reducing wheel hop, and adding cornering consistency to your 1964-1972 GM A-body is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMRs rod end, double-adjustable tubular control arms for GM A-bodies (TCA038) are TIG-welded using heavy-duty DOM steel tubing. This design gives you a strong control arm that greatly improves performance.BMR Suspension designed the TCA038 to excel in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and youre left with poor performance. The TCA038s heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMRs heavy-duty rod ends are designed to solidly link the rearend to the body, eliminate deflection and wasted power. Our rod ends will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling. These are the perfect upgrade for the enthusiast looking to greatly improve performance without NVH levels being a concern. When performance is a must, rely on BMR Suspension!BMR Suspensions TCA038 double-adjustable rod end lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

These are the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions TCA034 non-adjustable polyurethane lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH002 (includes upper and lower control arm hardware - Highly Recommended) is also available.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

These are the perfect upgrade for the enthusiast looking to improve performance, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!BMR Suspensions TCA034 non-adjustable polyurethane lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Control arm hardware kit RH002 (includes upper and lower control arm hardware - Highly Recommended) is also available.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

Fits all 2005-2014 S197 Mustangs (including V-6 and GT500);Designed to OEM length with OEM rear offset;High-durometer internally fluted polyurethane greasable bushings;MIG-welded 1x2-inch square-tube steel;Five pounds lighter than stock LCAs;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

Fits all 2005-2014 S197 Mustangs (including V-6 and GT500);Designed to OEM length with OEM rear offset;High-durometer internally fluted polyurethane greasable bushings;MIG-welded 1x2-inch square-tube steel;Five pounds lighter than stock LCAs;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

BMRs polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!These arms require modification to be compatible with MRC equipped vehicles.BMR Suspensions TCA029 on-car-adjustable polyurethane lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1 2014-2017 Chevrolet SS Base 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP

BMRs polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling. These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!These arms require modification to be compatible with MRC equipped vehicles.BMR Suspensions TCA029 on-car-adjustable polyurethane lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1 2014-2017 Chevrolet SS Base 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP

These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!NOTE: TCA028 is not compatible with the factory rear sway bar end links. Part number ELK006 is required to retain the rear sway bar. Designed for lowered vehicles only. Use on OE height vehicles may not provide adequate camber adjustability. Due to shortened length of these control arms, adjustable toe rods are necessary when using this product.These arms require modification to be compatible with MRC equipped vehicles.BMR Suspensions TCA028 on-car-adjustable polyurethane lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1 2014-2017 Chevrolet SS Base 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP

These are the perfect upgrade for the enthusiast looking to improve performance at an affordable price, while maintaining acceptable NVH levels and ride quality. When performance is a must, rely on BMR Suspension!NOTE: TCA028 is not compatible with the factory rear sway bar end links. Part number ELK006 is required to retain the rear sway bar. Designed for lowered vehicles only. Use on OE height vehicles may not provide adequate camber adjustability. Due to shortened length of these control arms, adjustable toe rods are necessary when using this product.These arms require modification to be compatible with MRC equipped vehicles.BMR Suspensions TCA028 on-car-adjustable polyurethane lower control arms are available in red and black hammertone powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1 2014-2017 Chevrolet SS Base 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP

BMR 02-10 SSR Non-Adj. Lower Control Arms (Polyurethane) - Red

BMR 02-10 SSR Non-Adj. Lower Control Arms (Polyurethane) - Black Hammertone

BMR 02-10 SSR On-Car Adj. Lower Control Arms (Polyurethane) - Red

BMR 02-10 SSR On-Car Adj. Lower Control Arms (Polyurethane) - Black Hammertone

BMR Suspension 05-14 Ford Mustang S197 Non-Adjustable Polyurethane Spherical Bearing Combo- Red

BMR 05-14 S197 Mustang Non-Adj. Lower Control Arms (Poly/Spher Combo) - Black Hammertone

BMR 05-14 S197 Mustang On-Car Adj. Lower Control Arms / Rod End Combo (Polyurethane) - Red

BMR 05-14 S197 Mustang On-Car Adj. Lower Control Arms / Rod End Combo (Poly) - Black Hammertone