Control Arms

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA038 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA037 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA036 Lower A-arms are equipped with heavy-duty, Teflon-lined rod ends. BMR?s heavy-duty rod ends are designed to solidly link the A-arms to the body, eliminating deflection. Our rod ends will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA036 Lower A-arms are equipped with heavy-duty, Teflon-lined rod ends. BMR?s heavy-duty rod ends are designed to solidly link the A-arms to the body, eliminating deflection. Our rod ends will stand up to high loads of any performance environment, offering all of the bind-free suspension articulation needed for great handling.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA035 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMR?s AA035 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMR?s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.Application GuideThis Part Fits: Year Make Model Submodel 1979-1981 Ford Mustang Base 1981 Ford Mustang Cobra 1979-1981 Ford Mustang Ghia 1982-1983 Ford Mustang GL 1982-1983 Ford Mustang GLX 1982-1993 Ford Mustang GT 1984 Ford Mustang GT-350 20th Anniversary 1982-1984 Ford Mustang L 1984-1993 Ford Mustang LX 1984-1986 Ford Mustang SVO 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R 1983 Ford Mustang Turbo GT

Added to the factory 2 degrees of caster, this allows you to achieve up to 6 degrees of total positive caster. This gives you improved geometry and increased lateral grip during cornering situations. The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA033 Non-Adjustable Upper and Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

Added to the factory 2 degrees of caster, this allows you to achieve up to 6 degrees of total positive caster. This gives you improved geometry and increased lateral grip during cornering situations. The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA033 Non-Adjustable Upper and Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch and 1.625-inch DOM tubing with laser-cut, CNC-formed plate steel plate, deflection is eliminated with A-arms from BMR Suspension. BMRs AA032 Upper and Lower A-arms come with new ball joints, and greasable, 95-durometer bushings, which add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. The lower A-arms also feature greasable heavy-duty ball joints, zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends and greasable, 95-durometer polyurethane bushings.BMRs AA032 Upper and Lower A-arms reduce weight and eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The means you get a great blend of performance and comfort for street performance, drag race, and handling applications. The AA032 uppers feature a 3 degree improved ball joint angle for lowered cars. These are compatible with all stock components.BMR Suspension AA032 Upper and Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.Control arm hardware kit RH011 (Includes upper and lower control arm hardware - Highly Recommended) also available.This Part Fits: Year Make Model Submodel 1993-2002 Chevrolet Camaro Base 1993 Chevrolet Camaro Indianapolis 500 Pace Car 1996-1997 Chevrolet Camaro RS 1993-2002 Chevrolet Camaro Z28 1998-2002 Chevrolet Camaro Z28 SS 1993-2002 Pontiac Firebird Base 1993-2002 Pontiac Firebird Formula 1993-2002 Pontiac Firebird Trans Am 1994 Pontiac Firebird Trans Am GT

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch and 1.625-inch DOM tubing with laser-cut, CNC-formed plate steel plate, deflection is eliminated with A-arms from BMR Suspension. BMRs AA032 Upper and Lower A-arms come with new ball joints, and greasable, 95-durometer bushings, which add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. The lower A-arms also feature greasable heavy-duty ball joints, zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends and greasable, 95-durometer polyurethane bushings.BMRs AA032 Upper and Lower A-arms reduce weight and eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The means you get a great blend of performance and comfort for street performance, drag race, and handling applications. The AA032 uppers feature a 3 degree improved ball joint angle for lowered cars. These are compatible with all stock components.BMR Suspension AA032 Upper and Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.Control arm hardware kit RH011 (Includes upper and lower control arm hardware - Highly Recommended) also available.This Part Fits: Year Make Model Submodel 1993-2002 Chevrolet Camaro Base 1993 Chevrolet Camaro Indianapolis 500 Pace Car 1996-1997 Chevrolet Camaro RS 1993-2002 Chevrolet Camaro Z28 1998-2002 Chevrolet Camaro Z28 SS 1993-2002 Pontiac Firebird Base 1993-2002 Pontiac Firebird Formula 1993-2002 Pontiac Firebird Trans Am 1994 Pontiac Firebird Trans Am GT

The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA031 Non-Adjustable Upper and Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH009 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1970-1980 Chevrolet Camaro Base 1979-1981 Chevrolet Camaro Berlinetta 1973-1978 Chevrolet Camaro LT 1976-1978 Chevrolet Camaro LT Rally Sport 1976-1980 Chevrolet Camaro Rally Sport 1970-1973,1975 Chevrolet Camaro RS 1981 Chevrolet Camaro Sport 1970-1972 Chevrolet Camaro SS 1970-1974,1977-1981 Chevrolet Camaro Z28 1975-1979 Chevrolet Nova Base 1976-1977 Chevrolet Nova Concours 1975,1978-1979 Chevrolet Nova Custom 1975 Chevrolet Nova LN 1975-1978 Chevrolet Nova Police 1977-1979 Chevrolet Nova Rally 1976 Chevrolet Nova SS 1970-1981 Pontiac Firebird Base 1970-1981 Pontiac Firebird Esprit 1970-1981 Pontiac Firebird Formula 1970-1981 Pontiac Firebird Trans Am

The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA031 Non-Adjustable Upper and Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH009 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1970-1980 Chevrolet Camaro Base 1979-1981 Chevrolet Camaro Berlinetta 1973-1978 Chevrolet Camaro LT 1976-1978 Chevrolet Camaro LT Rally Sport 1976-1980 Chevrolet Camaro Rally Sport 1970-1973,1975 Chevrolet Camaro RS 1981 Chevrolet Camaro Sport 1970-1972 Chevrolet Camaro SS 1970-1974,1977-1981 Chevrolet Camaro Z28 1975-1979 Chevrolet Nova Base 1976-1977 Chevrolet Nova Concours 1975,1978-1979 Chevrolet Nova Custom 1975 Chevrolet Nova LN 1975-1978 Chevrolet Nova Police 1977-1979 Chevrolet Nova Rally 1976 Chevrolet Nova SS 1970-1981 Pontiac Firebird Base 1970-1981 Pontiac Firebird Esprit 1970-1981 Pontiac Firebird Formula 1970-1981 Pontiac Firebird Trans Am

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch and 1.500-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR Suspension. BMRs AA030 Upper and Lower A-arms are fitted with heavy-duty ball joints and greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA030 Upper and Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications.BMR Suspension AA030 Non-Adjustable Upper and Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.Control arm hardware kit RH010 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.25-inch and 1.500-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR Suspension. BMRs AA030 Upper and Lower A-arms are fitted with heavy-duty ball joints and greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA030 Upper and Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications.BMR Suspension AA030 Non-Adjustable Upper and Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.Control arm hardware kit RH010 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Combine with BMR Lower A-arms, and you get 4 additional degrees of positive caster (2 degree from the uppers and 2 degrees from the lowers), providing up to 6 degrees of total positive caster over stock. This gives you improved geometry and increased lateral grip during cornering situations. The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA029 Non-Adjustable Upper and lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1967-1969 Chevrolet Camaro Base 1967-1969 Chevrolet Camaro RS 1967-1969 Chevrolet Camaro SS 1967-1969 Chevrolet Camaro Z28 1968 Chevrolet Chevy II Nova 1969-1974 Chevrolet Nova Base 1973-1974 Chevrolet Nova Custom 1968-1969 Pontiac Firebird 350 1969 Pontiac Firebird 350 HO 1967-1969 Pontiac Firebird 400 1967-1969 Pontiac Firebird Base 1967 Pontiac Firebird HO 1967-1969 Pontiac Firebird Sprint 1969 Pontiac Firebird Trans Am

Combine with BMR Lower A-arms, and you get 4 additional degrees of positive caster (2 degree from the uppers and 2 degrees from the lowers), providing up to 6 degrees of total positive caster over stock. This gives you improved geometry and increased lateral grip during cornering situations. The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA029 Non-Adjustable Upper and lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 4-5 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1967-1969 Chevrolet Camaro Base 1967-1969 Chevrolet Camaro RS 1967-1969 Chevrolet Camaro SS 1967-1969 Chevrolet Camaro Z28 1968 Chevrolet Chevy II Nova 1969-1974 Chevrolet Nova Base 1973-1974 Chevrolet Nova Custom 1968-1969 Pontiac Firebird 350 1969 Pontiac Firebird 350 HO 1967-1969 Pontiac Firebird 400 1967-1969 Pontiac Firebird Base 1967 Pontiac Firebird HO 1967-1969 Pontiac Firebird Sprint 1969 Pontiac Firebird Trans Am

These A-arms utilize tall ball joints, drastically improving the camber curve over OE arms/ball joints. This camber gain ensures maximum tire contact while cornering. The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA028 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

These A-arms utilize tall ball joints, drastically improving the camber curve over OE arms/ball joints. This camber gain ensures maximum tire contact while cornering. The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA028 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

These A-arms utilize tall ball joints, drastically improving the camber curve over OE arms/ball joints. This camber gain ensures maximum tire contact while cornering. The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA027 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1967-1969 Chevrolet Camaro Base 1967-1969 Chevrolet Camaro RS 1967-1969 Chevrolet Camaro SS 1967-1969 Chevrolet Camaro Z28 1968 Chevrolet Chevy II Nova 1969-1974 Chevrolet Nova Base 1973-1974 Chevrolet Nova Custom 1968-1969 Pontiac Firebird 350 1969 Pontiac Firebird 350 HO 1967-1969 Pontiac Firebird 400 1967-1969 Pontiac Firebird Base 1967 Pontiac Firebird HO 1967-1969 Pontiac Firebird Sprint 1969 Pontiac Firebird Trans Am

These A-arms utilize tall ball joints, drastically improving the camber curve over OE arms/ball joints. This camber gain ensures maximum tire contact while cornering. The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA027 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1967-1969 Chevrolet Camaro Base 1967-1969 Chevrolet Camaro RS 1967-1969 Chevrolet Camaro SS 1967-1969 Chevrolet Camaro Z28 1968 Chevrolet Chevy II Nova 1969-1974 Chevrolet Nova Base 1973-1974 Chevrolet Nova Custom 1968-1969 Pontiac Firebird 350 1969 Pontiac Firebird 350 HO 1967-1969 Pontiac Firebird 400 1967-1969 Pontiac Firebird Base 1967 Pontiac Firebird HO 1967-1969 Pontiac Firebird Sprint 1969 Pontiac Firebird Trans Am

Fits 1993-2002 GM F-Body;Eliminates lower A-arm deflection;1-inch lower shock mount;Adjustable design;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Greasable, 95-durometer polyurethane bushings;Zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1993-2002 Chevrolet Camaro Base 1993 Chevrolet Camaro Indianapolis 500 Pace Car 1996-1997 Chevrolet Camaro RS 1993-2002 Chevrolet Camaro Z28 1998-2002 Chevrolet Camaro Z28 SS 1993-2002 Pontiac Firebird Base 1993-2002 Pontiac Firebird Formula 1993-2002 Pontiac Firebird Trans Am 1994 Pontiac Firebird Trans Am GT

Fits 1993-2002 GM F-Body;Eliminates lower A-arm deflection;1-inch lower shock mount;Adjustable design;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Greasable, 95-durometer polyurethane bushings;Zinc-plated, X-series, heat-treated, chrome-moly, self-lubricating, Teflon-lined rod ends;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1993-2002 Chevrolet Camaro Base 1993 Chevrolet Camaro Indianapolis 500 Pace Car 1996-1997 Chevrolet Camaro RS 1993-2002 Chevrolet Camaro Z28 1998-2002 Chevrolet Camaro Z28 SS 1993-2002 Pontiac Firebird Base 1993-2002 Pontiac Firebird Formula 1993-2002 Pontiac Firebird Trans Am 1994 Pontiac Firebird Trans Am GT

The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you a improved camber curve through the front suspensions range of motion.BMR Suspension AA017 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

Fits 1964-1972 GM A-Body;Eliminates upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Laser-cut, CNC-formed plate steel braces for extra strength;Fixture welded for precise fit;Dual-offset cross-shafts for minimizing shim stack;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Two additional degrees of positive caster built into A-arms;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.500-inch, 0.095-inch wall and 1.525-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR Suspension. BMRs AA016 Lower A-arms are fitted with heavy-duty ball joints and greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA016 Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications.BMR Suspension AA016 Non-Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.500-inch, 0.095-inch wall and 1.525-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR Suspension. BMRs AA016 Lower A-arms are fitted with heavy-duty ball joints and greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA016 Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications.BMR Suspension AA016 Non-Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH006 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1965-1967 Buick Gran Sport Base 1970,1972 Buick Skylark 350 1964-1972 Buick Skylark Base 1968-1972 Buick Skylark Custom 1967-1968 Chevrolet Chevelle 300 1967-1969 Chevrolet Chevelle 300 Deluxe 1964-1968,1970-1972 Chevrolet Chevelle Base 1967-1972 Chevrolet Chevelle Concours 1969-1972 Chevrolet Chevelle Concours Estate 1965-1967 Chevrolet Chevelle Deluxe 1969-1972 Chevrolet Chevelle Greenbrier 1968-1972 Chevrolet Chevelle Malibu 1968-1972 Chevrolet Chevelle Nomad 1964-1972 Chevrolet Chevelle SS 1964-1972 Chevrolet El Camino Base 1968-1972 Chevrolet El Camino Custom 1968-1972 Chevrolet El Camino SS 1964-1967 Chevrolet Malibu Base 1970-1972 Chevrolet Monte Carlo Base 1964-1971 Oldsmobile 442 Base 1964-1972 Oldsmobile Cutlass Base 1972 Oldsmobile Cutlass Cruiser 1964-1967 Oldsmobile Cutlass Holiday 1968,1971-1972 Oldsmobile Cutlass S 1967 Oldsmobile Cutlass Turnpike Cruiser 1964-1972 Pontiac GTO Base 1970-1971 Pontiac GTO The Judge 1964-1972 Pontiac LeMans Base 1972 Pontiac LeMans Luxury 1969-1970 Pontiac LeMans Safari 1970-1972 Pontiac LeMans Sport 1971 Pontiac LeMans T37

The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you an improved camber curve through the front suspensions range of motion.BMR Suspension AA015 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH009 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1970-1980 Chevrolet Camaro Base 1979-1981 Chevrolet Camaro Berlinetta 1973-1978 Chevrolet Camaro LT 1976-1978 Chevrolet Camaro LT Rally Sport 1976-1980 Chevrolet Camaro Rally Sport 1970-1973,1975 Chevrolet Camaro RS 1981 Chevrolet Camaro Sport 1970-1972 Chevrolet Camaro SS 1970-1974,1977-1981 Chevrolet Camaro Z28 1970-1981 Pontiac Firebird Base 1970-1981 Pontiac Firebird Esprit 1970-1981 Pontiac Firebird Formula 1970-1981 Pontiac Firebird Trans Am

The upper arms also have revised cross shaft geometry and shorter overall length, requiring less shim stack to achieve negative camber on lowered cars, or race and pro touring vehicles with aggressive alignments. The combination of cross shaft design and the shortened overall A-arm length gives you an improved camber curve through the front suspensions range of motion.BMR Suspension AA015 Non-Adjustable Upper A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH009 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1970-1980 Chevrolet Camaro Base 1979-1981 Chevrolet Camaro Berlinetta 1973-1978 Chevrolet Camaro LT 1976-1978 Chevrolet Camaro LT Rally Sport 1976-1980 Chevrolet Camaro Rally Sport 1970-1973,1975 Chevrolet Camaro RS 1981 Chevrolet Camaro Sport 1970-1972 Chevrolet Camaro SS 1970-1974,1977-1981 Chevrolet Camaro Z28 1970-1981 Pontiac Firebird Base 1970-1981 Pontiac Firebird Esprit 1970-1981 Pontiac Firebird Formula 1970-1981 Pontiac Firebird Trans Am

Fits 1970-1981 GM F-Body;Eliminates lower A-arm deflection;Improves steering feel and response for normal and performance driving;Additional caster adjustability for high-speed stability;Fixture welded for precise fit;Dual-offset cross-shafts;Shorter overall arm length;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1970-1980 Chevrolet Camaro Base 1979-1981 Chevrolet Camaro Berlinetta 1973-1978 Chevrolet Camaro LT 1976-1978 Chevrolet Camaro LT Rally Sport 1976-1980 Chevrolet Camaro Rally Sport 1970-1973,1975 Chevrolet Camaro RS 1981 Chevrolet Camaro Sport 1970-1972 Chevrolet Camaro SS 1970-1974,1977-1981 Chevrolet Camaro Z28 1970-1981 Pontiac Firebird Base 1970-1981 Pontiac Firebird Esprit 1970-1981 Pontiac Firebird Formula 1970-1981 Pontiac Firebird Trans Am

Fits 1970-1981 GM F-Body;Eliminates lower A-arm deflection;Improves steering feel and response for normal and performance driving;Additional caster adjustability for high-speed stability;Fixture welded for precise fit;Dual-offset cross-shafts;Shorter overall arm length;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1970-1980 Chevrolet Camaro Base 1979-1981 Chevrolet Camaro Berlinetta 1973-1978 Chevrolet Camaro LT 1976-1978 Chevrolet Camaro LT Rally Sport 1976-1980 Chevrolet Camaro Rally Sport 1970-1973,1975 Chevrolet Camaro RS 1981 Chevrolet Camaro Sport 1970-1972 Chevrolet Camaro SS 1970-1974,1977-1981 Chevrolet Camaro Z28 1970-1981 Pontiac Firebird Base 1970-1981 Pontiac Firebird Esprit 1970-1981 Pontiac Firebird Formula 1970-1981 Pontiac Firebird Trans Am

Fits 1978-1987 GM G-Body;Eliminates upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

Fits 1978-1987 GM G-Body;Eliminates upper A-arm deflection;Improves steering feel and response for normal and performance driving;Increased high-speed stability;Fixture welded for precise fit;Dual-offset cross-shafts;Requires less shim stack for negative camber than OE arms;Internally fluted, high durometer polyurethane bushings;Adds additional headers clearance;Pre-assembled with new polyurethane bumpstops;Includes new upper ball joints;Durable powdercoat finish;Proudly made in the U.S.A.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.500-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR Suspension. BMRs AA011 Lower A-arms are fitted with heavy-duty ball joints and greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA011 Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications.BMR Suspension AA011 Non-Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH010 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.500-inch, 0.095-inch wall DOM tubing with laser-cut, CNC-formed plate steel braces for extra strength, deflection is eliminated with A-arms from BMR Suspension. BMRs AA011 Lower A-arms are fitted with heavy-duty ball joints and greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA011 Lower A-arms eliminate A-arm deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The tubular design gives you tons of added strength and a significant reduction in weight over the stock arms. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications.BMR Suspension AA011 Non-Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH010 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1978-1987 Buick Regal Base 1982-1983 Buick Regal Estate Wagon 1987 Buick Regal GNX 1984-1987 Buick Regal Grand National 1978-1987 Buick Regal Limited 1982 Buick Regal Limited Turbo 1978-1982 Buick Regal Sport 1983-1986 Buick Regal T-Type 1978-1981 Chevrolet Malibu Base 1978-1983 Chevrolet Malibu Classic 1978-1980 Chevrolet Malibu Classic Estate 1978-1981 Chevrolet Malibu Classic Landau 1979-1980 Chevrolet Malibu Classic Sport 1979-1980 Chevrolet Malibu Estate 1979 Chevrolet Malibu Landau 1979 Chevrolet Malibu Police 1979-1980 Chevrolet Malibu Sport 1979,1981-1987 Chevrolet Monte Carlo Base 1983 Chevrolet Monte Carlo CL 1978-1981 Chevrolet Monte Carlo Landau 1986-1987 Chevrolet Monte Carlo LS 1978,1980 Chevrolet Monte Carlo Sport 1983-1987 Chevrolet Monte Carlo SS 1980 Oldsmobile Cutlass Base 1980-1981 Oldsmobile Cutlass Brougham 1980-1981 Oldsmobile Cutlass LS 1978-1979 Oldsmobile Cutlass Vista Cruiser 1979 Oldsmobile Cutlass Vista Cruiser Brougham 1978-1987 Pontiac Grand Prix Base 1981-1987 Pontiac Grand Prix Brougham 1984-1987 Pontiac Grand Prix LE 1978-1983 Pontiac Grand Prix LJ 1978-1980 Pontiac Grand Prix SJ

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMRs AA008 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA008 lower A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications, BMR lower A-arms are engineered to give you improved geometry and increased lateral grip during cornering situations.BMR Suspension AA008 Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH010 (Includes upper and lower control arm hardware - Highly Recommended) also available.Application GuideThis Part Fits: Year Make Model Submodel 1988 Chevrolet Camaro Base 1982-1986 Chevrolet Camaro Berlinetta 1985-1990 Chevrolet Camaro Iroc-Z 1987 Chevrolet Camaro LT 1989-1992 Chevrolet Camaro RS 1992 Chevrolet Camaro RS Heritage Edition 1982-1987 Chevrolet Camaro Sport 1982-1987,1991-1992 Chevrolet Camaro Z28 1992 Chevrolet Camaro Z28 Heritage Edition 1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car 1982-1992 Pontiac Firebird Base 1989-1992 Pontiac Firebird Formula 1982-1986 Pontiac Firebird S/E 1982-1992 Pontiac Firebird Trans Am 1989-1992 Pontiac Firebird Trans Am GTA 1989 Pontiac Firebird Trans Am GTA SE

A-arms are one of the most important, yet overlooked suspension components. They are the direct link between the front wheels and the chassis. Any deflection causes a change in alignment, which results in poor performance and driving feel. Fabricated from heavy-duty 1.5-inch, 0.095-inch wall and 1.25-inch, 0.095-inch wall DOM tubing, deflection is eliminated with A-arms from BMR Suspension. BMRs AA008 Lower A-arms are equipped with greasable, 95-durometer polyurethane bushings. Polyurethane bushings add a solid, more responsive feel over the stock rubber bushings. BMRs bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings.BMRs AA008 lower A-arms eliminate deflection, greatly improving steering feel and response in normal and performance driving situations. The polyurethane bushings add strength and reduce deflection over the stock rubber bushing, while still absorbing much of the NVH. The means you get a great blend of performance and comfort. Designed for street performance, drag race, and handling, and pro-touring applications, BMR lower A-arms are engineered to give you improved geometry and increased lateral grip during cornering situations.BMR Suspension AA008 Adjustable Lower A-arms are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is 3-4 hours. Proudly made in the U.S.A.Control arm hardware kit RH010 (Includes upper and lower control arm hardware - Highly Recommended) also available.This Part Fits: Year Make Model Submodel 1988 Chevrolet Camaro Base 1982-1986 Chevrolet Camaro Berlinetta 1985-1990 Chevrolet Camaro Iroc-Z 1987 Chevrolet Camaro LT 1989-1992 Chevrolet Camaro RS 1992 Chevrolet Camaro RS Heritage Edition 1982-1987 Chevrolet Camaro Sport 1982-1987,1991-1992 Chevrolet Camaro Z28 1992 Chevrolet Camaro Z28 Heritage Edition 1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car 1982-1992 Pontiac Firebird Base 1989-1992 Pontiac Firebird Formula 1982-1986 Pontiac Firebird S/E 1982-1992 Pontiac Firebird Trans Am 1989-1992 Pontiac Firebird Trans Am GTA 1989 Pontiac Firebird Trans Am GTA SE