DV8 Offroad

Our MTO Series Tacoma Rear Bumper was designed as a direct replacement to the factory bumper, with no cutting or modification required for installation. It brings the addition of 2 reinforced clevis mounts that take 3/4-inch D-rings, providing you with recovery options. A 3-inch light pod can be mounted behind the aluminum mesh panels towards each end of the bumper. ?At each corner of the bumper is a side step, for convenience in accessing the truck bed. The MTO is compatible with factory rear parking sensors and retains full functionality. The blind spot detection module does not function with this bumper.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016-2022 Toyota Tacoma Limited 2016-2022 Toyota Tacoma SR 2016-2022 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2022 Toyota Tacoma TRD Off-Road 2017-2022 Toyota Tacoma TRD Pro 2016-2022 Toyota Tacoma TRD Sport

RBTT1-03 2016+ Toyota Tacoma Rear Bumper. The DV8 Offroad RBFF1-02 rear bumper is designed to provide exceptional protection at a fraction of the weight of ordinary steel bumpers. Although these bumpers are made with 3/16 inch steel with 1/4 inch reinforcements throughout, DV8 shaves every pound possible off of the bumper with strategic cutouts and mesh aluminum grills that can be removed and color keyed to the vehicle. DV8 also integrates 2 LED backup lights into the bumper for improved visibility while backing up. This bumper has 2 shackle recovery points and utilizes the factory license plate lights and comes in a lightly textured black powder coat. Key Features: Optional step for easy access, Lighter than normal steel bumpers, Mesh aluminum grills that can be color keyed to the vehicle, LED backup lights, Retains access to spare tire, Comes powdercoated, Lights Included.CatalogThis Part Fits: Year Make Model Submodel 2016-2021 Toyota Tacoma Limited 2016-2021 Toyota Tacoma SR 2016-2021 Toyota Tacoma SR5 2021 Toyota Tacoma Trail 2016-2021 Toyota Tacoma TRD Off-Road 2017-2021 Toyota Tacoma TRD Pro 2016-2021 Toyota Tacoma TRD Sport

DV8 Offroad bumpers are all trail tested and proven designs! 3/16 inch and 1/4 inch cold rolled steel, .120 wall tubing, high degree angles and raised corners, Solid D-ring mounts w/ rings included. All bumpers come in textured black powder coating. Rear stubby Bumper and class 3 hitch. For 2007-2018 Jeep Wrangler all models. Easy installation, no modifications needed and hardware Features: Stubby Bumper, Easy Bolt-On Install, LED Flush Mount Back Up Lights, .120 Wall Tubing, 3/16 inch and 1/4 inch Cold Rolled Steel, Solid D-ring Mounts with Rings Included, Textured Black, Class 3 Hitch Included, Fits 2007-2018 Jeep Wrangler, Sold as Each. Lights Included. Note: Tire Carrier (Available Separately).CatalogThis Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 2007-2017 Jeep Wrangler Rubicon 2007-2017 Jeep Wrangler Sahara 2010-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2011 Jeep Wrangler Unlimited 70th Anniversary 2016 Jeep Wrangler Unlimited 75th Anniversary 2007-2017 Jeep Wrangler Unlimited Rubicon 2007-2017 Jeep Wrangler Unlimited Sahara 2010-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2007-2010 Jeep Wrangler Unlimited X 2007-2010 Jeep Wrangler X 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

DV8 Offroad bumpers are all trail tested and proven designs! 3/16 inch and 1/4 inch cold rolled steel, .120 wall tubing, high degree angles and raised corners, Solid D-ring mounts w/ rings included. All bumpers come in textured black powder coating. Rear stubby Bumper and class 3 hitch. For 2007-2018 Jeep Wrangler all models. Easy installation, no modifications needed and hardware included. Features: Rear Stubby Bumper, .120 Wall Tubing, 3/16 inch and 1/4 inch Cold Rolled Steel, Solid D-ring Mounts with Rings Included, Textured Black Powdercoat, Hardware Included, Class 3 Hitch Included, Fits 2007-2018 Jeep Wrangler, Sold as Each, Lights Not Included.CatalogThis Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 2007-2017 Jeep Wrangler Rubicon 2007-2017 Jeep Wrangler Sahara 2010-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2011 Jeep Wrangler Unlimited 70th Anniversary 2016 Jeep Wrangler Unlimited 75th Anniversary 2007-2017 Jeep Wrangler Unlimited Rubicon 2007-2017 Jeep Wrangler Unlimited Sahara 2010-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2007-2010 Jeep Wrangler Unlimited X 2007-2010 Jeep Wrangler X 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

DV8 Offroad 18-23 Wrangler JL FS-7 Series Rear BumperCatalog

DV8 Offroad 2018 Jeep Wrangler JL FS-15 Series Rear BumperCatalog

Our FS-15 Series Rear Bumper is designed for off-road use and rock crawling. It has a low-profile design for better clearance and departure angles. It retains factory features like the hitch, trailer harness, connector, license plate lights, and parking sensor cutouts (we recommend using our Mopar Sensor Bezels for installation). The bumper also includes tabs for tidy wire management. For recovery, it has 1-inch thick mounts for ?-inch D-ring shackles with ?-inch pins. It's finished in a durable black powder coat for protection. Installation is a simple bolt-on process that requires two people.Catalog

The Spec Series Rear Bumper for the Jeep Gladiator features a high clearance design for aggressive rock crawling. It is capable of mounting two 3-inch light pods towards either end of the bumper for supplemental trail lighting. There are welded zip-tie tabs on the interior of the bumper to provide clean wire management options. Two clevis mounts capable of running ?-inch D-ring shackles provide recovery options if needed. The bumper was finished in a rust-resistant micro texture black powder coat, with satin black aluminum accent panels. The Spec Series is compatible with the factory hitch and also includes a high clearance trailer wiring mount.Catalog

The DV8 Offroad RBGL-01 was designed to be tucked up and out of the way for traversing difficult trails and coming off of rock ledges. The bumper features 2 recovery shackle attachments and a license plate mounting system with lights and comes with the standard DV8 Offroad textured black powdercoat. It is designed to work with the OEM hitch and mounts with no drilling or modification to the vehicle. Features: 2020-Present Jeep Gladiator, High clearance design, Powdercoat, Aggressive angles and styling, Easy to install, Accommodates backup sensors, Paintable Mesh, Aluminum Inserts.CatalogThis Part Fits: Year Make Model Submodel 2021 Jeep Gladiator 80th Anniversary 2020 Jeep Gladiator Altitude 2021 Jeep Gladiator High Altitude 2020 Jeep Gladiator Launch Edition 2020-2021 Jeep Gladiator Mojave 2020-2021 Jeep Gladiator Overland 2020-2021 Jeep Gladiator Rubicon 2020-2021 Jeep Gladiator Sport 2020-2021 Jeep Gladiator Sport S 2021 Jeep Gladiator Willys 2021 Jeep Gladiator Willys Sport

The RBGC-01 is a full width rear bumper for the 2015+ GMC Canyon and Chevy Colorado. It comes with the flush mount lights included and adds protection to the rear of the truck. During testing DV8 found that the factory step bumpers tend to get severely bent with even moderate off-roading, this sparked the need for something tougher and the RBGC-01 was born. This bumper stands up to severe punishment in every terrain. Details: Made Of 3/16 Inch Cold Rolled Steel, Bolt-On With No Cutting Necessary, Easy To Install, Optional SPGC-01 Skid Plate Adds Even More Protection (Sold Separately), Rugged Look With OEM Lines, Retains OEM Tow Package, Comes Powder coated Black (As Pictured), Lights Included.CatalogInstallation InstructionsThis Part Fits: Year Make Model Submodel 2015-2019 Chevrolet Colorado Base 2015-2019 Chevrolet Colorado LT 2015-2019 Chevrolet Colorado WT 2015-2019 Chevrolet Colorado Z71 2017-2019 Chevrolet Colorado ZR2 2018-2020 GMC Canyon All Terrain 2015-2020 GMC Canyon Base 2017-2020 GMC Canyon Denali 2015-2020 GMC Canyon SL 2015-2020 GMC Canyon SLE 2015-2020 GMC Canyon SLT

RBFF2-02 2017 to present Ford F-250/350/450 Rear Bumper. The DV8 Offroad RBFF1-02 rear bumper is designed to provide exceptional protection at a fraction of the weight of ordinary steel bumpers. Although these bumpers are made with 3/16 Inc. steel with 1/4 inch reinforcements throughout, DV8 shaves every pound possible off of the bumper with strategic cutouts and mesh aluminum grills that can be removed and color keyed to the vehicle. DV8 also integrates 2 LED backup lights into the bumper for improved visibility while backing up. This bumper has 2 shackle recovery points and utilizes the factory license plate lights and comes in a lightly textured black powder coat. Key Features: Lighter than normal steel bumpers, Mesh aluminum grills that can be color keyed to the vehicle, LED backup lights, Utilizes the factory license plate lights, Retains access to spare tire, Comes powdercoated, Lights Included.CatalogThis Part Fits: Year Make Model Submodel 2018 Ford F-150 King Ranch 2018 Ford F-150 Lariat 2018 Ford F-150 Limited 2018 Ford F-150 Platinum 2018-2019 Ford F-150 Raptor 2018 Ford F-150 SSV 2018 Ford F-150 XL 2018 Ford F-150 XLT 2017-2018 Ford F-250 Super Duty King Ranch 2017-2018 Ford F-250 Super Duty Lariat 2018 Ford F-250 Super Duty Limited 2017-2018 Ford F-250 Super Duty Platinum 2017-2018 Ford F-250 Super Duty XL 2017-2018 Ford F-250 Super Duty XLT 2017-2018 Ford F-350 Super Duty King Ranch 2017-2018 Ford F-350 Super Duty Lariat 2018 Ford F-350 Super Duty Limited 2017-2018 Ford F-350 Super Duty Platinum 2017-2018 Ford F-350 Super Duty XL 2017-2018 Ford F-350 Super Duty XLT

Our Made to Overland F-150 Rear Bumper was designed for minimal bulk with an aggressive style. The factory license plate lights, trailer harness, and parking sensors are all retained in the design of the bumper. On each side of the bumper a 3? flush mount light pod can be mounted for additional lighting on the trail. Its gusseted steel construction provides protection for the rear end, and is also perfect for a work site. Each corner of the bumper has a utility step to allow for easier access to the truck bed. Two clevis mounts that take ?? D-ring shackles provide recovery options if needed. The aluminum accent panels cut weight and can be removed and painted if desired.Catalog

RBFF1-02 2018 to present Ford F-150 Rear Bumper. The DV8 Offroad RBFF1-02 rear bumper is designed to provide exceptional protection at a fraction of the weight of ordinary steel bumpers. Although these bumpers are made with 3/16 inch steel with 1/4 inch reinforcements throughout, DV8 shaves every pound possible off of the bumper with strategic cutouts and mesh aluminum grills that can be removed and color keyed to the vehicle. DV8 also integrates 2 LED backup lights into the bumper for improved visibility while backing up. This bumper has 2 shackle recovery points and utilizes the factory license plate lights and comes in a lightly textured black powder coat. Key Features: Lighter than normal steel bumpers, Mesh aluminum grills that can be color keyed to the vehicle, LED backup lights, Utilizes the factory license plate lights, Retains access to spare tire, Comes powdercoated, Lights Included.CatalogThis Part Fits: Year Make Model Submodel 2015-2018 Ford F-150 King Ranch 2015-2018 Ford F-150 Lariat 2016-2018 Ford F-150 Limited 2015-2018 Ford F-150 Platinum 2018 Ford F-150 Police Responder 2017-2019 Ford F-150 Raptor 2016-2018 Ford F-150 SSV 2015-2018 Ford F-150 XL 2015-2018 Ford F-150 XLT

The DV8 Off-Road RBDR2-03 Rear Bumper for the 2019-21 Ram 2500 & 3500 is designed to provide exceptional protection and improved styling over the factory bumper. This bumper installs with provided hardware and is compatible with the factory hitch receiver and wiring. Includes dual purpose hooks for an easy recovery and built-in steps on both sides.CatalogThis Part Fits: Year Make Model Submodel 2019-2021 Ram 2500 Big Horn 2019-2021 Ram 2500 Laramie 2019-2021 Ram 2500 Laramie Longhorn 2019-2021 Ram 2500 Limited 2021 Ram 2500 Limited Longhorn 2019-2021 Ram 2500 Lone Star 2019-2021 Ram 2500 Power Wagon 2019-2021 Ram 2500 Tradesman 2019-2021 Ram 3500 Big Horn 2019-2021 Ram 3500 Laramie 2019-2020 Ram 3500 Laramie Longhorn 2019-2021 Ram 3500 Limited 2019-2021 Ram 3500 Lone Star 2019-2021 Ram 3500 SLT 2019-2021 Ram 3500 Tradesman

DV8 Offroad?s 6th Gen Bronco Competition Series Rear Bumper is a steel tube & plate constructed low-profile bumper inspired by desert racing. Towards either side of the bumper are light mounts suited for 3-inch LED light pods. Its low-profile design allows you to fit up to a 37-inch spare tire. The OEM reverse sensors are integrated into the bumper via mounting holes, this retains full functionality of the feature. It also accommodates the factory hitch. There are two, paintable aluminum accent panels that help cut weight and add to the style of the bumper. Installation is a simple bolt-on process.Catalog

The FS-15 Series Bronco Rear Bumper was designed to maximize ground clearance and provide superior rear-end protection.. The license plate mount is located above the bumper and includes an LED plate light. Up to a 37-inch spare tire will fit above the bumper. Two 3-inch flush mount pod lights can be installed towards either side of the bumper. Two reinforced clevis mounts that take ?-inch D-ring shackles provide recovery options in case you get into trouble on the trail. This bumper is constructed of 3.5mm steel plating with 5mm steel supports, and then finished in a finely textured black powder coat to protect against rust.Installation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2021 Ford Bronco Badlands 2021 Ford Bronco Base 2021 Ford Bronco Big Bend 2021 Ford Bronco Black Diamond 2021 Ford Bronco First Edition 2021 Ford Bronco Outer Banks 2021 Ford Bronco Wildtrak

The Bronco MTO Series Rear Bumper is compatible with all Bronco trim levels. We've placed the license plate mount at the side of the bumper, in order to accommodate up to 37-inch wheels and to ensure the tail gate swings open freely. Included with the new license plate bracket are license plate lights. Two 3-inch flush mount pod lights can be mounted towards either side of the bumper. There are 2 clevis mounts that take 3/4-inch D-ring shackles that provide recovery options. The MTO Series bumper includes sensor holes to retain full functionality of the factory backup sensors.CatalogInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2021 Ford Bronco Badlands 2021 Ford Bronco Base 2021 Ford Bronco Big Bend 2021 Ford Bronco Black Diamond 2021 Ford Bronco First Edition 2021 Ford Bronco Outer Banks 2021 Ford Bronco Wildtrak

DV8 LED Fog Lights provide an alternative to factory fog lights and compliment LED headlights. These lights come complete with a housing that is the same as the factory housing and a connector that is ready to be spliced into the factory wiring. If you are running an aftermarket bumper and need fog lights or just want to upgrade your stock bumper these lights are a great option. Features: LED Fog Lights, 4 inch 30W Replacement. Fits 2007-2018 Jeep JK Wrangler. Sold as a Pair.CatalogThis Part Fits: Year Make Model Submodel 2011 Jeep Wrangler 70th Anniversary 2016 Jeep Wrangler 75th Anniversary 2007-2017 Jeep Wrangler Rubicon 2007-2017 Jeep Wrangler Sahara 2010-2017 Jeep Wrangler Sport 2016 Jeep Wrangler Sport S 2011 Jeep Wrangler Unlimited 70th Anniversary 2016 Jeep Wrangler Unlimited 75th Anniversary 2007-2017 Jeep Wrangler Unlimited Rubicon 2007-2017 Jeep Wrangler Unlimited Sahara 2010-2017 Jeep Wrangler Unlimited Sport 2016 Jeep Wrangler Unlimited Sport S 2007-2010 Jeep Wrangler Unlimited X 2007-2010 Jeep Wrangler X 2018 Jeep Wrangler JK Rubicon 2018 Jeep Wrangler JK Sahara 2018 Jeep Wrangler JK Sport 2018 Jeep Wrangler JK Sport S 2018 Jeep Wrangler JK Unlimited Rubicon 2018 Jeep Wrangler JK Unlimited Sahara 2018 Jeep Wrangler JK Unlimited Sport 2018 Jeep Wrangler JK Unlimited Sport S

DV8 Optical Technology and cutting edge design delivers unparallel light output. 3.5 in. round utility light, polycarbonate lens, IP68 rated, flood, 3W Cree Led rated 50'000 hours, 16W total, 1400 Lumens, 3.5x3.5x1.8, bottom mountCatalog

The DV8 4Runner Molle Panels were designed to handle tough trails while keeping your gear securely stowed. They enable you to maximize your cargo space by providing additional storage options. The molle pattern gives you multiple options for attachment systems including straps, bolts, zip ties, & other solutions. The panels are perfect for mounting molle bags, first aid kits, knives, recovery gear, tools, and other accessories.Catalog

The DV8 Mopar Sensor bezels are the perfect addition to your new bumper purchase. Many factory applications dont allow for easy transfer of the sensor brackets; however, our kit will turn that hassle turn into a simple job. Our kits offer four semi-directional front bezels and four rear clips like factory. These are designed to work with all MOPAR sensors.Catalog

Our Molle Panel Cargo Net Replacement for the GX 470 addresses the common problem of the factory cargo net sagging over time. Constructed from 3mm steel and finished in a micro-texture black powder coat; this panel maintains its structure no matter how much you use it. It?s a great storage solution for gear like molle bags, recovery gear, tools, med-kit, and whatever else you want with you on- or off-road. The tall front panel ensures items stowed in the pocket stay there when driving on rough terrain. We made sure to improve on storage capabilities, providing 3.5? x 5.5? x 20.5? of available cargo space. Installation is quick and easy, but some drilling is required.Catalog

The DV8 Offroad GX 460 Molle Panels increase your storage capacity and efficiency while remaining secure in off-road conditions. They are designed to conform to the shape of the rear windows and body for a clean, finished look. There are several accessory mounting options including the molle mesh pattern, as well as individual mounting holes for a variety of gear and accessories.Catalog

The DV8 Offroad GX 470 Molle Panels increase your storage capacity and efficiency while remaining secure in off-road conditions. They are designed to conform to the shape of the rear windows and body for a clean, finished look. There are several accessory mounting options including the molle mesh pattern, as well as individual mounting holes for a variety of gear and accessories.Catalog

This hardware pack contains M5 bolts, washers, and replacement PEM nuts for DV8 Offroad Center Console & Dash Digital Device Mounts. The pack includes (8) M5x12mm, (8) M5x16mm, (16) M5 Flat Washers, and (2) M5 Replacement Pem Nuts. The hardware can be used to mount RAM diamond base mounts to our center console bridges & dash mounts. We?ve even included 2 replacement M5 PEM nuts in case you need to replace one.Catalog

Our 2021+ Bronco Front Door Pocket Molle Panels are a direct replacement to the sagging door panel nets. Made from rugged steel, these panels allow you to store items inside the pockets, and molle accessories can be mounted on the outside of the panels. The panels are also designed to hold a water bottle. Installation is quick and easy utilizing factory hardware, and the panels are compatible with all 2- and 4-door 2021+ Bronco models. Increase the utility of your Bronco interior with our front door pocket molle panels.Catalog

Our Front License Plate Mount relocates your plate at the center of your bumper and out of the way of the grille. This allows for maximum airflow to the engine compartment. It was designed to be located in a more aesthetic position, giving a full view of the OEM Capable Steel Bumper. It mounts at a steep angle to allow maximum clearance. The bracket was finished in a micro-texture black powder coat, and features a simple bolt-on installation. * Please Note: This ONLY fits the OEM Capable Steel Bumper. This Does Not Fit the HD Modular Steel or Plastic Bumpers.Catalog

Our 6th Gen Bronco Rear License Plate Relocation Bracket moves the plate location to the tailgate beside the factory carrier. This is the perfect solution for relocating the license plateCatalog

This front license plate relocation bracket places your license plate towards the side of your bumper. The option available from dealers places your license plate above your bumper in front of the grille. In this position it partially blocks airflow to the engine compartment. Our Bronco license plate bracket relocates it to the side of the bumper in a more aesthetic position. Installation is simple, and utilizes two factory bolt locations.CatalogInstallation InstructionsThis Part Fits: Year Make Model Submodel 2021-2023 Ford Bronco Badlands 2021-2023 Ford Bronco Base 2021-2023 Ford Bronco Big Bend 2021-2023 Ford Bronco Black Diamond 2022-2023 Ford Bronco Everglades 2021 Ford Bronco First Edition 2023 Ford Bronco Heritage Edition 2023 Ford Bronco Heritage Limited Edition 2021-2023 Ford Bronco Outer Banks 2022-2023 Ford Bronco Raptor 2021-2023 Ford Bronco Wildtrak

This front license plate relocation bracket places your license plate just below the center of your bumper at a slight angle. The option available from dealers places your license plate above your bumper in front of the grille. Our Bronco license plate bracket relocates it to the bottom of the bumper in a more aesthetic position, and due to its angle, it doesn't interfere with off-road driving.?Installation InstructionsThis Part Fits: Year Make Model Submodel 2021-2022 Ford Bronco Badlands 2021-2022 Ford Bronco Base 2021-2022 Ford Bronco Big Bend 2021-2022 Ford Bronco Black Diamond 2022 Ford Bronco Everglades 2021 Ford Bronco First Edition 2021-2022 Ford Bronco Outer Banks 2022 Ford Bronco Raptor 2021-2022 Ford Bronco Wildtrak 2021-2022 Ford Bronco Sport Badlands 2021-2022 Ford Bronco Sport Base 2021-2022 Ford Bronco Sport Big Bend 2021 Ford Bronco Sport First Edition 2021-2022 Ford Bronco Sport Outer Banks

Our Universal License Plate Mount features a pair of pod light mounts for additional lighting options on the trail. This fits a number of front and rear factory bumpers. It can also be mounted on a number of off-road front bumpers, bolted into the fairlead holes. It features a bottle opener on the side.CatalogInstallation Instructions

The DV8 Offroad LBUN-01 is a bolt-on bull bar with light mount for MTO Series Front Bumpers. Manufactured from high grade steel and protected with a powder coat finish, the LBUN-01 can mount the DV8 Offroad 13-Inch Elite Series Light Bar.CatalogInstallation InstructionsThis Part Fits: Year Make Model Submodel 2021 Ford Bronco Badlands 2021 Ford Bronco Base 2021 Ford Bronco Big Bend 2021 Ford Bronco Black Diamond 2021 Ford Bronco First Edition 2021 Ford Bronco Outer Banks 2021 Ford Bronco Wildtrak

Pair these A-Pillar Dual Light Pod Mounts with our LBJL-10 Light Bar Mount (required) to attach (2) 3-inch light pods on each side of your hood cowl. This setup maximizes trail lighting without obstructing your view thanks to its sleek, low-profile design. Customize your lighting with options for single or dual pods, potentially mixing amber and clear lenses. You can aim one forward and the other to the side for versatile illumination. Finished in a durable micro-texture black powder coat for protection and style. *** PLEASE NOTE - This can ONLY be installed with our LBJL-10 Light Bar Mount. It can NOT be used without the light bar mount.Catalog

Our low-profile light bar mount lets you attach a 50-inch LED light bar just above your rig's windshield. It's designed to be low-profile to reduce wind noise, but won't block your view. The mount fits most 50-inch light bars and has a hidden channel for tidy wiring. Mount to mount measures 52-inches. It also comes with foam to protect your rig's paint. The 3-bolt setup keeps the light bar secure on rough roads. The black powder coating prevents rust, and it's easy to install on factory bolt hole locations. These were designed for use with our A-Pillar Dual Light Pod Mounts (optional) to provide maximum trail lighting.Catalog

The DV8 392/Mojave Edition A-Pillar Light Bar Mount is designed to accommodate an over-windshield LED light bar, with mounting points that are 52-inches apart end to end. The brackets were designed to conceal the wire harness running from the light bar into the engine bay, keeping a clean appearance.CatalogInstallation InstructionsThis Part Fits: Year Make Model Submodel 2020-2022 Jeep Gladiator Mojave 2021 Jeep Wrangler Islander 2018-2022 Jeep Wrangler Rubicon 2018-2022 Jeep Wrangler Sport 2018-2022 Jeep Wrangler Sport S 2018-2022 Jeep Wrangler Unlimited Rubicon 2021-2022 Jeep Wrangler Unlimited Rubicon 392 2018-2022 Jeep Wrangler Unlimited Sahara 2018-2022 Jeep Wrangler Unlimited Sport 2018-2022 Jeep Wrangler Unlimited Sport S

These pod light brackets install directly to factory mounting locations on the cowl/a-pillar of your Jeep Mojave or 392. Up to two 3-inch LED pod lights can be installed on each side, providing ample lighting on the trail in low-light conditions. The brackets are constructed with 4mm steel, and finished in a micro-texture black powder coat. These are the perfect choice for those who want sleek, low-profile dual pod light mounts.CatalogInstallation InstructionsThis Part Fits: Year Make Model Submodel 2020-2022 Jeep Gladiator Mojave 2021 Jeep Wrangler Islander 2018-2022 Jeep Wrangler Rubicon 2018-2022 Jeep Wrangler Sport 2018-2022 Jeep Wrangler Sport S 2018-2022 Jeep Wrangler Unlimited Rubicon 2021-2022 Jeep Wrangler Unlimited Rubicon 392 2018-2022 Jeep Wrangler Unlimited Sahara 2018-2022 Jeep Wrangler Unlimited Sport 2018-2022 Jeep Wrangler Unlimited Sport S