Magnaflow

MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23652 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1981-1995 Isuzu Pickup, 1975-1982 Chevrolet LUV, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.This Part Fits: Year Make Model Submodel 1975-1982 Chevrolet LUV Base 1977-1979 Chevrolet LUV Mighty Mike 1975-1982 Chevrolet LUV Mikado 1980-1982 Chevrolet LUV Sport 1989-1994 Isuzu Amigo S 1989-1994 Isuzu Amigo XS 1985-1989 Isuzu Impulse Base 1988-1992 Isuzu Pickup 1 Ton 1981-1987 Isuzu Pickup Base 1981-1987 Isuzu Pickup DLX 1983,1986-1992 Isuzu Pickup LS 1984-1985 Isuzu Pickup LX 1988-1995 Isuzu Pickup S 1989-1990 Isuzu Pickup XS 1991-1995 Isuzu Rodeo LS 1991-1995 Isuzu Rodeo S 1991-1992 Isuzu Rodeo XS 1984-1985 Isuzu Trooper Base 1986-1987 Isuzu Trooper DLX 1986-1991 Isuzu Trooper LS 1986 Isuzu Trooper LX 1989-1990 Isuzu Trooper RS 1988-1991 Isuzu Trooper S 1991 Isuzu Trooper SE 1988-1991 Isuzu Trooper XS

The MagnaFlow 2025 RAM 1500 I6-3.0L SPEQ Series Cat-Back Performance Exhaust System 19684 brings out the personality of your Truck with our signature resonant, powerful exhaust tone and dyno-proven performance. #19684 2.5” diameter mandrel bent main piping passes through a No Drone Technology (NDT) chamber and an all-new specifically tuned performance round muffler before exiting in a dual split rear exit with 5” polished tips. This full-size truck exhaust kit is the perfect equalizer between sound and performance. Upgrade your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this system your truck will be producing moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19684 features a cat-back exhaust layout that replaces your trucks stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19684 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty. Installation InstructionsThis Part Fits: Year Make Model Submodel 2025 Ram 1500 Big Horn 2025 Ram 1500 Laramie 2025 Ram 1500 Lone Star 2025 Ram 1500 Rebel 2025 Ram 1500 Tradesman 2025 Ram 1500 Tradesman HFE 2025 Ram 1500 Warlock

The MagnaFlow 2025 RAM 1500 V6-3.6L SPEQ Series Cat-Back Performance Exhaust System 19680 brings out the personality of your Truck with our signature resonant, powerful exhaust tone and dyno-proven performance. #19683 3” diameter mandrel bent main piping passes through a specifically tuned performance oval muffler before exiting in a single passenger side rear exit with a 4” polished tip. This full-size truck exhaust kit is the perfect equalizer between sound and performance. Upgrade your truck to the next level with an exhaust that has the pipes to put other trucks to shame. With this system your truck will be producing moderate exterior and mild interior sound levels while leaving other trucks feeling envious at every stoplight. Exhaust kit 19683 features a cat-back exhaust layout that replaces your trucks stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19683 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty. Installation InstructionsThis Part Fits: Year Make Model Submodel 2025 Ram 1500 Big Horn 2025 Ram 1500 Lone Star 2025 Ram 1500 Tradesman 2025 Ram 1500 Tradesman HFE

The MagnaFlow Toyota Land Cruiser Overland Series Cat-Back Performance Exhaust System #19679 is engineered for off-road function and built to explore further. This Toyota Land Cruiser exhaust system is designed for the 2024 Toyota Land Cruiser equipped with the L4 2.4L engine. The high clearance exhaust design of this kit is intended to keep your truck clear of any challenging terrain or obstacles you may come across. #19679 3” diameter mandrel bent main piping passes through an all-new specifically tuned performance oval and round mufflers with No Drone Technology (NDT) before exiting in a high-clearance single driver side rear exit style. MagnaFlow NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. Exhaust kit #19679 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Toyota Land Cruiser cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024 Toyota Land Cruiser 1958 2024 Toyota Land Cruiser Base 2024 Toyota Land Cruiser First Edition

The MagnaFlow 2024 Ford Ranger Raptor Competition Series Cat-Back Performance Exhaust System 19637 brings an aggressive, attention-grabbing edge to the deep resonant exhaust note we're so well known for. This cat-back exhaust kit is designed to enhance your 3.0L V6 2024 Ford Ranger Raptor with dyno-proven performance made possible thanks to fast-flowing mandrel bent 3in. diameter piping that passes a straight-through muffler ending in a dual rear exit with 4in. welded-on double wall angle cut folded edge tips featuring a sporty black chrome finish. Exhaust system 19637’s cat-back layout replaces your truck's exhaust system from the catalytic converter on back with a weight-optimized, corrosion resistant, and durable stainless-steel design. This race-ready exhaust system is engineered to make your Ford Ranger Raptor's V6 engine produce moderate interior and aggressive exterior sound levels. Extensive 3D scanning was used during the development of this Ford Ranger Raptor exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. Exhaust system 19637 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow's limited lifetime warranty. Please check to ensure compliance with local noise regulations.Installation InstructionsThis Part Fits: Year Make Model Submodel 2024 Ford Ranger Raptor

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23-278. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2018-2022 Chevrolet Traverse and 2018-2022 Buick Enclave, this direct-fit catalytic converter also interchanges with OE parts 84256774 and 23481265. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.This Part Fits: Year Make Model Submodel 2018-2023 Buick Enclave Avenir 2018 Buick Enclave Base 2018-2023 Buick Enclave Essence 2019-2021 Buick Enclave Preferred 2018-2023 Buick Enclave Premium 2018-2023 Chevrolet Traverse High Country 2018-2021 Chevrolet Traverse L 2018-2023 Chevrolet Traverse LS 2018-2023 Chevrolet Traverse LT 2018-2023 Chevrolet Traverse Premier 2019-2023 Chevrolet Traverse RS

The MagnaFlow Subaru Crosstrek Overland Series Cat-Back Performance Exhaust System #19676 empowers your 2018-2023 Subaru Crosstrek overland rig, equipped with the 2.0L/2.5L H4 engine, with MagnaFlow’s deep signature exhaust note and dyno-proven performance. #19676 features 2.5” diameter mandrel bent main piping that passes through an 18” offset-offset oval muffler with uniquely-integrated No Drone Technology (NDT) tuned chamber before exiting in a high-clearance single passenger side rear exit with a 3.5” black chrome tip. MagnaFlow NDT utilizes Helmholtz resonance noise cancellation to minimize unwanted droning noises at cruising speeds when you’re en route to your destination, creating mild interior and moderate exterior sound levels The high clearance black chrome tip, etched with the MagnaFlow logo, is designed to keep your car clear of any challenging terrain or obstacles you may come across, so you can look and sound good when you’re out exploring. Exhaust kit #19676 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Subaru Crosstrek cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow’s limited lifetime warranty.Installation InstructionsThis Part Fits: Year Make Model Submodel 2018-2023 Subaru Crosstrek Base 2019-2023 Subaru Crosstrek Hybrid 2018-2023 Subaru Crosstrek Limited 2018-2023 Subaru Crosstrek Premium 2021-2023 Subaru Crosstrek Sport

MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99779HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99776HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93423 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. Designed to fit the 1992-1995 Ford E-150 Econoline and 1992-1995 Ford E-150 Econoline Club Wagon, this direct-fit catalytic converter also interchanges with OE parts F4UZ-5F250-C and F4UZ-5F250-D, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.This Part Fits: Year Make Model Submodel 1992-1995 Ford E-150 Econoline Base 1992-1995 Ford E-150 Econoline XL 1992-1995 Ford E-150 Econoline Club Wagon Chateau 1992-1995 Ford E-150 Econoline Club Wagon Custom 1992-1995 Ford E-150 Econoline Club Wagon XLT

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 79316 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 79315 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 79314 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592966 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 2008-2012 Chevrolet Colorado, 2008-2012 GMC Canyon, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2008 Chevrolet Colorado LS 2008-2012 Chevrolet Colorado LT 2008-2012 Chevrolet Colorado WT 2008 GMC Canyon SL 2008-2012 GMC Canyon SLE 2008-2012 GMC Canyon SLT 2008-2012 GMC Canyon WT 2008 Hummer H3 Adventure 2008 Hummer H3 Base 2008 Hummer H3 Luxury 2008 Hummer H3 X 2008 Isuzu i-290 S 2008 Isuzu i-370 LS

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592944. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2009-2012 Toyota RAV4. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2009-2012 Toyota RAV4 Base 2009-2012 Toyota RAV4 Limited 2009-2012 Toyota RAV4 Sport

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592907. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2013 Toyota Highlander, 2007-2009 Lexus RX350, and more, this direct-fit catalytic converter also interchanges with OE parts 17420-20350 and 17420-20400, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2004-2006 Lexus RX330 Base 2007-2009 Lexus RX350 Base 2004-2013 Toyota Highlander Base 2006-2007,2011-2013 Toyota Highlander Hybrid 2006-2007,2011-2013 Toyota Highlander Hybrid Limited 2004-2013 Toyota Highlander Limited 2013 Toyota Highlander Plus 2010-2013 Toyota Highlander SE 2006-2010 Toyota Highlander Sport

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592863. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2011-2013 Kia Sorento and 2010-2012 Hyundai Santa Fe, this direct-fit catalytic converter also interchanges with OE parts 28950-2G380 and 28950-2G450. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2010-2012 Hyundai Santa Fe GLS 2010-2012 Hyundai Santa Fe Limited 2011-2012 Kia Sorento Base 2011-2013 Kia Sorento EX 2011-2013 Kia Sorento LX

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592862. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2013 Acura MDX. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2010-2013 Acura MDX Base

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592852. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2009-2014 Nissan Murano. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2014 Nissan Murano CrossCabriolet 2009-2014 Nissan Murano LE 2009-2014 Nissan Murano S 2009-2014 Nissan Murano SL 2011-2014 Nissan Murano SV

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592804. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2010-2017 Chevrolet Equinox, 2010-2017 GMC Terrain, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2012-2015 Chevrolet Captiva Sport LS 2013-2015 Chevrolet Captiva Sport LT 2013-2015 Chevrolet Captiva Sport LTZ 2015-2017 Chevrolet Equinox L 2010-2017 Chevrolet Equinox LS 2010-2017 Chevrolet Equinox LT 2010-2016 Chevrolet Equinox LTZ 2017 Chevrolet Equinox Premier 2013-2017 GMC Terrain Denali 2015-2017 GMC Terrain SL 2010-2017 GMC Terrain SLE 2010-2017 GMC Terrain SLT

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592783. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011 Honda CR-V. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011 Honda CR-V EX 2011 Honda CR-V EX-L 2011 Honda CR-V LX 2011 Honda CR-V SE

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592749. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2006-2012 Toyota RAV4 and interchanges with OE parts 17404-0P022 and 17420-0V072, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2006-2012 Toyota RAV4 Base 2006-2012 Toyota RAV4 Limited 2006-2012 Toyota RAV4 Sport

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592708. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2014-2015 Nissan Rogue. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2014-2015 Nissan Rogue S 2014-2015 Nissan Rogue SL 2014-2015 Nissan Rogue SV

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592702. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2011-2014 Nissan Quest. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2014 Nissan Quest LE 2011-2014 Nissan Quest S 2011-2014 Nissan Quest SL 2011-2014 Nissan Quest SV

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592701. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2012-2015 Toyota Tacoma. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2012-2015 Toyota Tacoma Base 2012-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2012-2013 Toyota Tacoma X-Runner

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592699. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2013-2014 Nissan Pathfinder, 2013 INFINITI JX35, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2013 INFINITI JX35 Base 2014 INFINITI QX60 Base 2013-2014 Nissan Pathfinder Platinum 2013-2014 Nissan Pathfinder S 2013-2014 Nissan Pathfinder SL 2013-2014 Nissan Pathfinder SV

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592698. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2009 Lexus GX470 and 2005-2009 Toyota 4Runner, this direct-fit catalytic converter also interchanges with OE part 17410-50450. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2005-2009 Lexus GX470 Base 2005-2009 Toyota 4Runner Limited 2005-2009 Toyota 4Runner Sport 2005-2009 Toyota 4Runner SR5

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592697. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2005-2009 Lexus GX470 and 2005-2009 Toyota 4Runner, this direct-fit catalytic converter also interchanges with OE parts 17450-50121 and 17450-50120. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2005-2009 Lexus GX470 Base 2005-2009 Toyota 4Runner Limited 2005-2009 Toyota 4Runner Sport 2005-2009 Toyota 4Runner SR5

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592670. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2007-2018 Nissan Frontier, 2007-2015 Nissan Xterra, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2013-2018 Nissan Frontier Desert Runner 2007-2010 Nissan Frontier LE 2007-2008 Nissan Frontier Nismo Off-Road 2009-2018 Nissan Frontier PRO-4X 2011-2018 Nissan Frontier S 2007-2010 Nissan Frontier SE 2011-2018 Nissan Frontier SL 2011-2018 Nissan Frontier SV 2007-2012 Nissan Pathfinder LE 2007-2012 Nissan Pathfinder S 2007-2010 Nissan Pathfinder SE 2007-2009 Nissan Pathfinder SE Off-Road 2011-2012 Nissan Pathfinder Silver Edition 2011-2012 Nissan Pathfinder SV 2007-2010 Nissan Xterra Off-Road 2011-2015 Nissan Xterra PRO-4X 2007-2015 Nissan Xterra S 2007-2010 Nissan Xterra SE 2007-2015 Nissan Xterra X 2009 Suzuki Equator Base 2009-2012 Suzuki Equator RMZ-4 2009-2012 Suzuki Equator Sport

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592661. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2012-2015 Toyota Tacoma. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2012-2015 Toyota Tacoma Base 2012-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2012-2013 Toyota Tacoma X-Runner

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592612. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2015-2016 Chevrolet Colorado and 2015-2016 GMC Canyon. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2015-2016 Chevrolet Colorado LT 2015-2016 Chevrolet Colorado WT 2015-2016 Chevrolet Colorado Z71 2015-2016 GMC Canyon Base 2015-2016 GMC Canyon SLE 2015-2016 GMC Canyon SLT

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592609. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2015-2017 Chevrolet Colorado and 2015-2017 GMC Canyon. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2015-2017 Chevrolet Colorado Base 2015-2017 Chevrolet Colorado LT 2015-2017 Chevrolet Colorado WT 2015-2017 Chevrolet Colorado Z71 2015-2017 GMC Canyon Base 2015-2017 GMC Canyon SL 2015-2017 GMC Canyon SLE 2015 GMC Canyon SLT

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592602. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2005-2016 Nissan Frontier and 2009-2012 Suzuki Equator. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011-2016 Nissan Frontier S 2008-2010 Nissan Frontier SE 2011-2016 Nissan Frontier SV 2005-2010 Nissan Frontier XE 2009-2012 Suzuki Equator Base 2009-2012 Suzuki Equator Premium

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592597. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2011 Porsche Cayenne. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011 Porsche Cayenne S 2010 Porsche Cayenne S Transsyberia

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592595. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2010-2011 Porsche Cayenne. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2011 Porsche Cayenne S 2010 Porsche Cayenne S Transsyberia 2011 Porsche Cayenne Turbo

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5592579. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2009-2015 Chevrolet Traverse, 2009-2015 GMC Acadia, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.This Part Fits: Year Make Model Submodel 2012-2013 Buick Enclave Base 2014-2015 Buick Enclave Convenience 2009-2011 Buick Enclave CX 2009-2011 Buick Enclave CXL 2014-2015 Buick Enclave Leather 2014-2015 Buick Enclave Premium 2009-2015 Chevrolet Traverse LS 2009-2015 Chevrolet Traverse LT 2009-2015 Chevrolet Traverse LTZ 2011-2015 GMC Acadia Denali 2010-2013 GMC Acadia SL 2009-2015 GMC Acadia SLE 2009-2015 GMC Acadia SLT 2009-2010 Saturn Outlook XE 2009-2010 Saturn Outlook XR