Pedders

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2003-2009 Lexus GX470 Base 2003-2009 Toyota 4Runner Limited 2003-2009 Toyota 4Runner Sport 2003-2009 Toyota 4Runner SR5 2007-2009 Toyota FJ Cruiser Base 2008 Toyota FJ Cruiser Trail Teams Special Edition 2007 Toyota FJ Cruiser TRD Special Edition 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner 2015 Toyota Tacoma TRD Pro 2005-2013 Toyota Tacoma X-Runner

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2005-2007,2011-2014 Chrysler 300 Base 2005-2017 Chrysler 300 C 2013-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2005-2010 Chrysler 300 C SRT8 2005-2012,2015-2017 Chrysler 300 Limited 2008-2009 Chrysler 300 LX 2010,2012-2017 Chrysler 300 S 2009 Chrysler 300 Signature Series 2012-2014 Chrysler 300 SRT8 2013 Chrysler 300 SRT8 Core 2005-2010 Chrysler 300 Touring 2009-2010 Dodge Challenger R/T 2009-2010 Dodge Challenger SE 2008-2010 Dodge Challenger SRT8 2006-2007 Dodge Charger Base 2017 Dodge Charger Daytona 2017 Dodge Charger Daytona 392 2006 Dodge Charger Daytona R/T 2012-2017 Dodge Charger Pursuit 2006-2017 Dodge Charger R/T 2017 Dodge Charger R/T 392 2015-2016 Dodge Charger R/T Road & Track 2015-2016 Dodge Charger R/T Scat Pack 2006-2017 Dodge Charger SE 2015-2017 Dodge Charger SRT 392 2015-2017 Dodge Charger SRT Hellcat 2006-2010,2012-2014 Dodge Charger SRT8 2006-2010,2012-2017 Dodge Charger SXT 2012 Dodge Charger SXT Plus 2005-2008 Dodge Magnum R/T 2005-2008 Dodge Magnum SE 2006-2008 Dodge Magnum SRT8 2005-2008 Dodge Magnum SXT 2005 Dodge Magnum SXT Special Edition

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2005-2007,2011-2014 Chrysler 300 Base 2005-2017 Chrysler 300 C 2013-2014 Chrysler 300 C Luxury 2015-2017 Chrysler 300 C Platinum 2005-2010 Chrysler 300 C SRT8 2005-2012,2015-2017 Chrysler 300 Limited 2008-2009 Chrysler 300 LX 2010,2012-2017 Chrysler 300 S 2009 Chrysler 300 Signature Series 2012-2014 Chrysler 300 SRT8 2013 Chrysler 300 SRT8 Core 2005-2010 Chrysler 300 Touring 2009-2010 Dodge Challenger R/T 2009-2010 Dodge Challenger SE 2008-2010 Dodge Challenger SRT8 2006-2007 Dodge Charger Base 2017 Dodge Charger Daytona 2017 Dodge Charger Daytona 392 2006 Dodge Charger Daytona R/T 2012-2017 Dodge Charger Pursuit 2006-2017 Dodge Charger R/T 2017 Dodge Charger R/T 392 2015-2016 Dodge Charger R/T Road & Track 2015-2016 Dodge Charger R/T Scat Pack 2006-2017 Dodge Charger SE 2015-2017 Dodge Charger SRT 392 2015-2017 Dodge Charger SRT Hellcat 2006-2010,2012-2014 Dodge Charger SRT8 2006-2010,2012-2017 Dodge Charger SXT 2012 Dodge Charger SXT Plus 2005-2008 Dodge Magnum R/T 2005-2008 Dodge Magnum SE 2006-2008 Dodge Magnum SRT8 2005-2008 Dodge Magnum SXT 2005 Dodge Magnum SXT Special Edition

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2005-2007 Subaru Impreza WRX STI 2007 Subaru Impreza WRX STI Limited

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2015-2020 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2020 Ford Mustang GT Premium

Pedders Extreme Xa Coilover Kit 90-93 Ford Mustang Fox Body

Pedders Extreme Xa Coilover Kit 14-19 Chevrolet Corvette C7

Pedders 05-23 Toyota Tacoma 50mm Trakryder Lift Kit

Pedders 14-15 Chevrolet SS / 14-17 Chevrolet Caprice PPV Front Right Sports Ryder Strut

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2012-2014 Subaru Impreza Base 2012-2014 Subaru Impreza Limited 2012-2014 Subaru Impreza Premium 2012-2014 Subaru Impreza Sport Limited 2012-2014 Subaru Impreza Sport Premium 2011-2014 Subaru Impreza WRX 2011-2014 Subaru Impreza WRX Limited 2011-2014 Subaru Impreza WRX Premium

Pedders 14-15 Chevrolet SS / 14-17 Chevrolet Caprice PPV Front Left Sports Ryder Strut

Pedders 14-15 Chevrolet SS / 14-17 Chevrolet Caprice PPV Rear Sports Ryder Strut

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP

Pedders Mustang S197 05-14 eXtreme XA Suspension Kit

Pedders 04-06 Pontiac GTO Supercar Suspension KitThis Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2016-2019 Toyota Tacoma Limited 2005-2015 Toyota Tacoma Pre Runner 2016-2019 Toyota Tacoma SR 2016-2019 Toyota Tacoma SR5 2016-2019 Toyota Tacoma TRD Off-Road 2015,2017-2019 Toyota Tacoma TRD Pro 2016-2019 Toyota Tacoma TRD Sport 2005-2013 Toyota Tacoma X-Runner

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2006-2007 Subaru Impreza 2.5i 2002-2005 Subaru Impreza RS 2002-2007 Subaru Impreza WRX 2006-2007 Subaru Impreza WRX Limited 2004 Subaru Impreza WRX STI 2006-2007 Subaru Impreza WRX TR

Pedders Mustang S197 05-14 SportsRyder Sway Bar Kit

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2015-2022 Ford Mustang EcoBoost 2015-2022 Ford Mustang EcoBoost Premium 2015-2022 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2022 Ford Mustang GT Premium 2021-2022 Ford Mustang Mach 1 2017 Ford Mustang Shelby GT350 2015-2017 Ford Mustang V6

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2019-2020 Ford Mustang Bullitt 2015-2017,2019-2022 Ford Mustang EcoBoost 2015-2017,2019-2022 Ford Mustang EcoBoost Premium 2015-2017,2019-2022 Ford Mustang GT 2015 Ford Mustang GT 50 Years Limited Edition 2015-2017,2019-2022 Ford Mustang GT Premium 2021-2022 Ford Mustang Mach 1 2015-2018 Ford Mustang Shelby GT350 2015-2018 Ford Mustang Shelby GT350R 2015-2017 Ford Mustang V6

Pedders 04-06 Pontiac GTO Inner Tie Rod (Suits Non-KYB Racks)

Pedders 12-15 Chevrolet Camaro eXtreme xA Suspension Kit (Wide)This Part Fits: Year Make Model Submodel 2012-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2010-2015 Chevrolet Camaro LS 2010-2015 Chevrolet Camaro LT 2010-2015 Chevrolet Camaro SS 2014-2015 Chevrolet Camaro Z/28 2012-2015 Chevrolet Camaro ZL1

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2004-2006 Pontiac GTO Base

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2008-2009 Pontiac G8 Base 2008-2009 Pontiac G8 GT 2009 Pontiac G8 GXP

Pedders has played a prominent role in the Australian automotive aftermarket industry 1950. In the summer of 2006 Pedders USA became a reality by selling specialised parts to automotive wholesalers and specialist workshops throughout the U.S. By 2010 Pedders USA had established industry partnerships with GM, Lingenfelter, Richard Petty and Saleen. Pedders has been featured on TV with West Coast Customs and in magazines such as Supercar builder. For each new chassis Pedders USA develops an integrated and engineered suspension solution. There is no fixed formula. Its not an exact science. Our people identify the weaknesses in the OE suspension and develop Pedders components to correct them. We think like OE engineers, but without interference from sales, marketing and finance. We manufacture our Pedders parts to suit the automotive enthusiast and offer a comprehensive range of suspension components for most of the vehicles on the world's roads today, from AMC to Wolseley, with just about everything in between. We started in the USA with the fastest wide-body GTO on a road course. Next the fastest Chrysler 300C. Then Pedders USA's G8 and 5th Generation Camaro. When we moved to Ford, the results with the Saleen Mustang were the same. Our 'supercars' are developmental vehicles with purpose. We upgrade everything to make certain that we are testing at or above the levels of performance our customers will reach. We document every step of our development in enthusiast forums so they can benefit from our hard work. Ride quality is subjective. Our test cars serve as daily drivers. As we do our R & D work in AU and in the USA, the goal is to achieve a Pedders feel: the ideal balance between civility and performance handling. Pedders USA does not build parts for race cars. We make parts for the enthusiast driver that just happen to do extremely well on the race course. A fully Pedderised vehicle feels like a factory hot rod. It is quiet. It is comfortable. It handles.This Part Fits: Year Make Model Submodel 2005-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2008-2009 Ford Mustang Bullitt 2005-2014 Ford Mustang GT 2007-2008 Ford Mustang Shelby GT 2007-2014 Ford Mustang Shelby GT500 2008-2009 Ford Mustang Shelby GT500KR