AEM

CD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.WarrantyInstallation InstructionsInstallation Instructions

CD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.WarrantyInstallation InstructionsInstallation Instructions

AEM's OBDII CAN Plug & Play Adapter Harness make CD Dashes the perfect racing displays for track day enthusiasts who want to be able to see engine and vehicle data but are still running a factory ECU. This is especially true when a CD-5 Carbon or CD-7 Digital Dash and OBDII CAN PNP Adapter Harness are combined with the Vehicle Dynamics Module to add GPS, 3-axis accelerometer and 3-axis gyroscope for track mapping and lap times, and critical vehicle dynamics data including G-loads, roll, pitch and yaw. And for CD Dash owners with CAN OBD-II who are already using the dash and receiving channels from a data logger or other CAN-enabled device, you can now add additional channels through the OBD connection with no additional wiring!

AEM CD7 Carbon Digital Flat Panel Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.Installation InstructionsInstallation Instructions

AEM CD7 Carbon Digital Flat Panel Displays feature full-color, daylight readable screens surrounded by a slim, tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housings for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. A remote button kit (PN 30-3610, sold separately) easily wires into the CD Carbon wiring harness and allows users to change pages and clear memory. Two additional programmable LEDs are included in the enclosure and are fully programmable.Installation InstructionsInstallation Instructions

AEM's legendary Digital Wideband O2 AFR UEGO Gauge is a wideband UEGO air/fuel ratio controller (AFR) and gauge in one. It unites accuracy, speed and control with an easy to read, digital LED display and sweeping LED "needle" that changes colors as AFR changes from rich to lean. NOTE: The 30-4100 Wideband UEGO Gauge Controller that uses the 4.2 LSU sensor will be superseded to the 30-4110 Wideband UEGO Gauge Controller that uses the 4.9 LSU sensor in August 2014. Instructions for the 30-4100 will still be available in the Instructions tab after this change. WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER? AEM's Wideband UEGO (Universal Exhaust Gas Oxygen, pronounced "You-Way-Go") Controllers are powerful, cost-effective tuning tools that allow users to accurately monitor the Air/Fuel Ratio (AFR) of their engine. WHY USE A WIDEBAND AIR/FUEL CONTROLLER? Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned. WHAT IS FREE-AIR CALIBRATION? Some of our competitors require that you frequently perform a free-air calibration procedure to calibrate their O2 sensors. This process involves removing the sensor from the bung while still connected to the controller device, then waving the sensor in the air so it can read atmospheric O2 levels. We use 4.9 LSU sensors in our wideband controllers. Our sensors are individually laboratory-calibrated and never require free air calibration!WarrantyInstallation Instructions

Accurate AFR data is critical when tuning an engine. Running rich (very low air/fuel ratio, excessive fuel) can cause a loss in power, while running too lean (very high air/fuel ratio, not enough fuel) may result in serious engine damage. Using a wideband air/fuel controller during the tuning process allows you to monitor AFR and adjust tuning parameters to optimize them for maximum power and efficiency. AEM has a comprehensive line of highly accurate, reliable wideband air/fuel controllers that can help ensure your vehicle is optimally tuned.WarrantyInstallation Instructions

DTM-Style 2-Way Connector Kit, Includes Plug, Receptacle, Plug Wedge Lock, Receptacle Wedge Lock, 3 Female Pins and 3 Male PinsWarranty

AEM's Flex Fuel Ethanol Content Sensor Kits measure a vehicle's fuel ethanol content percentage and fuel temperature, which allows users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize an engine's tuning calibration for fuel ethanol content. While many gas stations label flex fuel as E85 (85% Ethanol and 15% Gasoline), actual ethanol content can be much different. Using AEM's Flex Fuel Ethanol Content Sensor delivers the ability to determine the amount of fuel blend being used at any given time.WarrantyInstallation Instructions

AEM's Flex Fuel Ethanol Content Sensor Kits measure a vehicle's fuel ethanol content percentage and fuel temperature, which allows users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize an engine's tuning calibration for fuel ethanol content. While many gas stations label flex fuel as E85 (85% Ethanol and 15% Gasoline), actual ethanol content can be much different. Using AEM's Flex Fuel Ethanol Content Sensor delivers the ability to determine the amount of fuel blend being used at any given time.WarrantyInstallation Instructions

Now available for internal combustion engines! The AEM EV PDU-8 is an eight channel Power Distribution Unit expansion device that gives you the power to program and control various switched devices using our ECU/VCUs, like high-voltage contactors, cooling fans, headlights, brake lights, turn signals, windshield wipers, fuel pumps, and more. The ability to connect up to eight PDU-8s (four on AEM Dashes, and one on Infinity ECU's) on the same CAN bus network lets installers mount the individual PDUs closer to the subsystems they are controlling, which simplifies wiring, reduces weight, and increases reliability. This CAN-based solid-state control module eliminates the need to install fuses and relays for the switched functions that it operates. The PDU-8 can easily be controlled by other CAN based controllers that support custom CAN settings, such as Motec, Link, FuelTech, Haltech, etc. Does work with Holley EFI if using the AEM dash display for logic based control.Installation Instructions

AEM Tru-Time Adjustable Camshaft Gears increase horsepower and torque without having to change the camshaft(s) and are must-have items for engines that are milled, forced induction, high compression and/or utilizing aftermarket competition cams. AEM Tru-Time cam gears enable users to match cam timing with their vehicle's tuning state by advancing or retarding the cam profile(s) in one-degree increments via true laser-etched markings. Precision-cut gear teeth ensure no premature wearing of the cam gear's belt surface and AEM's anodizing on the adjustable cam gear's teeth is lab-test proven as the hardest anodizing process on the market.WarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 2003-2006 Mitsubishi Lancer Evolution 2005-2006 Mitsubishi Lancer Evolution MR 2005-2006 Mitsubishi Lancer Evolution RS 2006 Mitsubishi Lancer Evolution SE

A single large return orifice is designed to handle high rate flow pumps. The regulator has a 1:1 rising pressure rate for boosted applications, and it is alcohol fuel and race fuel compatible. The High Cap Universal FPR is tapped to accept a 9/16"-18 O-Ring sealed fittings for inlet and return, and includes a 1/8 NPT port for a fuel pressure gauge or pressure sensor pick up.WarrantyInstallation Instructions

Thermal Time Constant: < 15 sec. The time required for the sensor to achieve 63.2% of its steady state value when subjected to a step change in ambient temperature [Tc=(Tf-Ti)*63.2%+Ti]. Test medium: silicone oilWarrantyInstallation Instructions

Plug n Play with our X-Series Temperature Gauge Part #30-0302

No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and the supplied hardware. The no-weld O2 sensor mount fits 1.75" to 3.0" exhaust pipe diameters.WarrantyInstallation Instructions

No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and the supplied hardware. The no-weld O2 sensor mount fits 1.75" to 3.0" exhaust pipe diameters.WarrantyInstallation Instructions

No welding equipment? No problem with AEM's No-Weld O2 Sensor Mounts. These mounts have an integrated bung that makes it easy to install a wideband UEGO air/fuel ratio sensor using just a drill and the supplied hardware. The no-weld O2 sensor mount fits 1.75" to 3.0" exhaust pipe diameters.WarrantyInstallation Instructions

Replacement Power Harness for 30-0300 X-Series Wideband Gauge

Plug n Play when used with our Classic Series Wideband Gauge Part #30-4100

AEM's RTD-Type Temperature Sensor (PN 30-2052) is packed with features that deliver consistent measurement and long life. This AEM EGT Sensor features a closed-tip design that lasts longer than the previous generation's perforated tip design and the tip is smaller for less intrusion-and less restriction. Inconel-tubing protects the wiring, which is terminated with a high-quality DTM-style 2-pin connector. The sensor reads a temperature range of -40 to 1,560 degrees F (-40 to 850 degrees C), and its thin-film platinum element provides a high degree of accuracy (+/- 0.9% from 536 to 1,560 degrees F). Our RTD-Type Sensor features a 90-degree bend at the sensor tip for easier installation in tight spaces, and it includes a weld-in sensor bung with machined M14x1.5 threads.Installation Instructions

Replacement Wiring Harnesses, Sensor Harness for X-Series Wideband Gauge 30-0300 and 30-0334

AEM's RTD-Type Temperature Sensor (PN 30-2052) is packed with features that deliver consistent measurement and long life. This AEM EGT Sensor features a closed-tip design that lasts longer than the previous generation's perforated tip design and the tip is smaller for less intrusion-and less restriction. Inconel-tubing protects the wiring, which is terminated with a high-quality DTM-style 2-pin connector. The sensor reads a temperature range of -40 to 1,560 degrees F (-40 to 850 degrees C), and its thin-film platinum element provides a high degree of accuracy (+/- 0.9% from 536 to 1,560 degrees F). Our RTD-Type Sensor features a 90-degree bend at the sensor tip for easier installation in tight spaces, and it includes a weld-in sensor bung with machined M14x1.5 threads.Warranty

AEM's RTD-Type Temperature Sensor (PN 30-2052) is packed with features that deliver consistent measurement and long life. This AEM EGT Sensor features a closed-tip design that lasts longer than the previous generation's perforated tip design and the tip is smaller for less intrusion-and less restriction. Inconel-tubing protects the wiring, which is terminated with a high-quality DTM-style 2-pin connector. The sensor reads a temperature range of -40 to 1,560 degrees F (-40 to 850 degrees C), and its thin-film platinum element provides a high degree of accuracy (+/- 0.9% from 536 to 1,560 degrees F). Our RTD-Type Sensor features a 90-degree bend at the sensor tip for easier installation in tight spaces, and it includes a weld-in sensor bung with machined M14x1.5 threads.Warranty

Air Temperature Sensor DTM-Style Kit, Includes 1/8-inch NPT Air Temperature Sensor with High Performance DTM-Style Connector, Aluminum Bung, Connector and PinsWarrantyInstallation Instructions

AEM offers 1/8" NPT DTM-Style Connector(PN 30-2013), 1/8" NPT (PN 30-2012) and 3/8" NPT (PN 30-2011) water/oil temperature sensor kit. Find the specifications of our fluid temperature sensors below.WarrantyInstallation Instructions

AEM offers 1/8" NPT DTM-Style Connector(PN 30-2013), 1/8" NPT (PN 30-2012) and 3/8" NPT (PN 30-2011) water/oil temperature sensor kit. Find the specifications of our fluid temperature sensors below.WarrantyInstallation Instructions

AEM's Universal Adjustable Fuel Pressure Regulator (AEM 25 302BK) is capable of supporting enough fuel flow for engines up to 1000 horsepower. Our universal AEM FPR is tapped to accept a -6 AN, or 9/16"x18 fittings and includes a 1/8 NPT port for a fuel pressure gauge or pressure sensor pick up.WarrantyInstallation Instructions

Bosch LSU 4.2 Wideband UEGO Installation Kit, Includes: Bosch LSU 4.2 Wideband UEGO Sensor, Weld-On Bung, Connector, Wire-Seals and PinsWarranty

AEM's Exhaust Backpressure install kit is specifically designed for use with AEM's 4-Channel Wideband UEGO Controller to provide accurate air/fuel ratio readings from wideband O2 sensors that are mounted pre-turbo. The Exhaust Backpressure install kit is engineered to provide backpressure readings without sacrificing sensor longevity due to extreme operating conditions. The kit includes an AEM high performance stainless steel 100psig pressure sensor (Part#30-2130-100), stainless steel standoff tube, stainless steel braided hose and fittings.WarrantyInstallation Instructions

Adjustable Fuel Pressure Regulator Rebuild Kit. Includes: Diaphragm, Single Large .250 Return Orifice & O-RingWarrantyInstallation Instructions

AEM's Universal High Flow -10 AN Inline Filter is specifically engineered for maximizing flow without sacrificing filtration, and is designed for ease of installation. The end caps are machined with -10AN female fittings that allow the filter to flow up to 12.32 gpm @ 45 PSI and 2.63 gpm @ 6 PSI. Machined O-ring receiver grooves on the end caps ensure against leaks, and all sealing o-rings and gaskets are made of Viton for outstanding performance when using gasoline, alcohol or gasoline/alcohol blended fuels. The commonly available replacement filter cartridges filter particles as small as 7 microns. The filter's standard 2" OD allows for easy mounting virtually anywhere in the vehicle for easy access.WarrantyInstallation Instructions

Any enthusiast running boost, nitrous or high RPMs is aware of the trade-offs associated with inductive coils versus converting to a capacitive-type discharge ignition system (CDI). While inductive coils deliver a long spark duration, they lack enough energy to light off the combustion chamber of a modified high-performance vehicle. In contrast, CDIs delivers intense energy but with inadequate spark duration, making the proper mixture in the combustion chamber critical for best performance. This tradeoff ends with AEM's High-Output "Dumb" Inductive Coils, the first inductive coils that deliver CDI-like spark energy and voltage, and the long spark duration necessary for vehicles running forced induction and nitrous.WarrantyInstallation Instructions

Auto enthusiasts who have forced induction engines, high RPM engines or run nitrous oxide are aware of the compromises that come with using inductive coils instead of converting to a Capacitive Discharge Ignition system (CDI). While inductive coils deliver a long spark duration with simplicity, they lack the energy to adequately ignite the mixture in the combustion chamber of a highly modified performance vehicle. Conversely, CDIs deliver an intense burst of spark energy, but with practically no spark duration, which makes having the proper air/fuel mixture in the combustion chamber paramount for best performance. This compromise ends with AEM's High-Output IGBT "Smart" Inductive Coils.WarrantyInstallation Instructions

AEM's stainless-steel tall wideband UEGO sensor bungs are designed specifically for use on forced induction applications using the 4-Channel Wideband UEGO Controller, but can be used for wideband sensors on any vehicle and with any AEM wideband UEGO AFR controller. The tall design of the bung keeps the sensor body cool and reduces restriction by minimizing the intrusion of the sensor tip into the exhaust piping, and the finned design enhances cooling.Warranty

These AEM LSU 4.2 sensors have a laser-etched, calibrated resistor in the sensor's connector body. This resistor is specifically created for the exact sensor that it is attached to. Modifying this will invalidate the sensor's output. The wideband sensor is laboratory-calibrated at the Bosch factory, accurate to 0.1 AFR and never requires free-air calibration when used with an AEM wideband AFR controller.Warranty