The AEM 21-8303DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Jeep Liberty models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8303DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2002-2003 Jeep Liberty Limited 2002-2003 Jeep Liberty Renegade 2002-2003 Jeep Liberty Sport

The AEM 21-8303DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Jeep Liberty models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8303DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2002-2003 Jeep Liberty Limited 2002-2003 Jeep Liberty Renegade 2002-2003 Jeep Liberty Sport

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2019-2024 Lexus ES350 Base 2019-2022 Lexus ES350 F Sport 2023-2024 Lexus ES350 F Sport Design 2023-2024 Lexus ES350 F Sport Handling 2019-2024 Lexus ES350 Luxury 2019-2024 Lexus ES350 Ultra Luxury 2019-2022 Toyota Avalon Limited 2019-2022 Toyota Avalon Touring 2020-2021 Toyota Avalon TRD 2019-2022 Toyota Avalon XLE 2019-2020 Toyota Avalon XSE 2021 Toyota Avalon XSE Nightshade 2020-2024 Toyota Camry TRD 2018-2024 Toyota Camry XLE 2018-2024 Toyota Camry XSE

The AEM 21-824 Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested for some Lexus GS200T models to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish and has mounts for the factory MAF sensor and PCV hose. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-824 vehicle applications to determine the legal status for each vehicle.Brochure - A general brochure describing a brand, company, product line. If brochure in question is for a specific product, use code PDB.Installation InstructionsThis Part Fits: Year Make Model Submodel 2016 Lexus GS200t Base 2016 Lexus GS200t F Sport

The AEM 21-823DS is a twin intake system designed for some Infinity Q70 models. The factory layout of this vehicle has individual throttle bodies for each bank of cylinders so each side has its own air intake system. This AEM air intake system replaces both the left and right factory air box, tube, and filter. This system includes the heat shield, intake tube, and AEM dryflow air filter on both left and right sides. The cone shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Both factory MAF sensors mount directly on the intake tube. The heatshield also has a rubberized edge trim to better isolate air from engine bay heat. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-823DS vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsThis Part Fits: Year Make Model Submodel 2011-2013 INFINITI M37 Base 2011-2013 INFINITI M37 X 2014-2017 INFINITI Q70 3.7

The AEM-21-822C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Accord models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crankcase vent tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-822C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2008-2012 Honda Accord EX 2008-2012 Honda Accord EX-L 2008-2012 Honda Accord LX 2008-2012 Honda Accord LX-P 2008-2012 Honda Accord LX-S 2011-2012 Honda Accord SE

The AEM 21-8228DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Ram 1500 Pickup and RAM 1500 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8228DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2014 Ram 1500 Big Horn 2012-2014 Ram 1500 Express 2014 Ram 1500 HFE 2013-2014 Ram 1500 Laramie 2014 Ram 1500 Laramie Limited 2013-2014 Ram 1500 Laramie Longhorn 2014 Ram 1500 Lone Star 2013-2014 Ram 1500 Outdoorsman 2013 Ram 1500 R/T 2013-2014 Ram 1500 SLT 2014 Ram 1500 Special Service 2013-2014 Ram 1500 Sport 2013-2014 Ram 1500 Tradesman

The AEM 21-8228DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Ram 1500 Pickup and RAM 1500 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8228DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2014 Ram 1500 Big Horn 2012-2014 Ram 1500 Express 2014 Ram 1500 HFE 2013-2014 Ram 1500 Laramie 2014 Ram 1500 Laramie Limited 2013-2014 Ram 1500 Laramie Longhorn 2014 Ram 1500 Lone Star 2013-2014 Ram 1500 Outdoorsman 2013 Ram 1500 R/T 2013-2014 Ram 1500 SLT 2014 Ram 1500 Special Service 2013-2014 Ram 1500 Sport 2013-2014 Ram 1500 Tradesman

The AEM 21-8223DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Charger and Challenger models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated above the driver's side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8223DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2017 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2008-2010 Dodge Challenger SRT8 2017 Dodge Challenger T/A 2017 Dodge Charger Daytona 2009-2017 Dodge Charger Pursuit 2009-2017 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2009-2014 Dodge Charger SE 2009-2010 Dodge Charger SRT8

The AEM 21-8223DC Brute Force Air Intake System produces horsepower and torque gains for high displacement engines by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Charger and Challenger models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located above the driver's side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8223DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2017 Dodge Challenger R/T 2012 Dodge Challenger R/T Classic 2015-2016 Dodge Challenger R/T Plus 2016 Dodge Challenger R/T Plus Shaker 2016 Dodge Challenger R/T Shaker 2008-2010 Dodge Challenger SRT8 2017 Dodge Challenger T/A 2017 Dodge Charger Daytona 2009-2017 Dodge Charger Pursuit 2009-2017 Dodge Charger R/T 2015-2016 Dodge Charger R/T Road & Track 2009-2014 Dodge Charger SE 2009-2010 Dodge Charger SRT8

The AEM 21-8222DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ram 1500 and Dodge Ram 1500 Pickup models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8222DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2010 Dodge Ram 1500 Laramie 2009-2010 Dodge Ram 1500 SLT 2009-2010 Dodge Ram 1500 Sport 2009-2010 Dodge Ram 1500 ST 2009-2010 Dodge Ram 1500 TRX 2009-2010 Dodge Ram 1500 TRX4 2011-2012 Ram 1500 Big Horn 2012 Ram 1500 Express 2011-2012 Ram 1500 Laramie 2011-2012 Ram 1500 Laramie Longhorn 2011-2012 Ram 1500 Outdoorsman 2011-2012 Ram 1500 SLT 2011-2012 Ram 1500 Sport 2011-2012 Ram 1500 ST 2011-2012 Ram 1500 Tradesman 2012 Ram 1500 Tradesman HD

The AEM 21-8222DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ram 1500 and Dodge Ram 1500 Pickup models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8222DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2010 Dodge Ram 1500 Laramie 2009-2010 Dodge Ram 1500 SLT 2009-2010 Dodge Ram 1500 Sport 2009-2010 Dodge Ram 1500 ST 2009-2010 Dodge Ram 1500 TRX 2009-2010 Dodge Ram 1500 TRX4 2011-2012 Ram 1500 Big Horn 2012 Ram 1500 Express 2011-2012 Ram 1500 Laramie 2011-2012 Ram 1500 Laramie Longhorn 2011-2012 Ram 1500 Outdoorsman 2011-2012 Ram 1500 SLT 2011-2012 Ram 1500 Sport 2011-2012 Ram 1500 ST 2011-2012 Ram 1500 Tradesman 2012 Ram 1500 Tradesman HD

The 21-821DS Performance Cold Air Intake System produces horsepower and torque gains by replacing the restrictive air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 370Z models. This system replaces both the left and right side intakes. The AEM Dryflow synthetic washable air filter does not require oiling and can be used up to 100,000 miles before servicing is needed (depending on driving conditions). The heatshield is a two piece design and also utilizes the factory air ducting. The intake tube is constructed from mandrel bent aluminum and has a durable gray powder coat finish. This air intake system was developed to accommodate the mass air flow sensor and PCV hose. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-821DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2010 Nissan 370Z 40th Anniversary Edition 2009-2020 Nissan 370Z Base 2018-2019 Nissan 370Z Heritage Edition 2009-2017,2019-2020 Nissan 370Z Nismo 2015-2018 Nissan 370Z Nismo Tech 2015-2020 Nissan 370Z Sport 2015-2018 Nissan 370Z Sport Tech 2019-2020 Nissan 370Z Sport Touring 2009-2019 Nissan 370Z Touring 2015-2018 Nissan 370Z Touring Sport

The AEM 21-8217DP Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Caliber, Jeep Patriot and Compass models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8217DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010 Dodge Caliber Express 2010 Dodge Caliber Heat 2010 Dodge Caliber Mainstreet 2007-2010 Dodge Caliber R/T 2010 Dodge Caliber Rush 2007-2010 Dodge Caliber SE 2008-2009 Dodge Caliber SRT-4 2007-2010 Dodge Caliber SXT 2010 Dodge Caliber Uptown 2007-2010 Jeep Compass Limited 2007-2010 Jeep Compass Sport 2007-2010 Jeep Patriot Limited 2007-2010 Jeep Patriot Sport

The AEM 21-8217DC Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Caliber, Jeep Patriot and Compass models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8217DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2010 Dodge Caliber Express 2010 Dodge Caliber Heat 2010 Dodge Caliber Mainstreet 2007-2010 Dodge Caliber R/T 2010 Dodge Caliber Rush 2007-2010 Dodge Caliber SE 2007-2010 Dodge Caliber SXT 2010 Dodge Caliber Uptown 2007-2010 Jeep Compass Limited 2007-2010 Jeep Compass Sport 2007-2010 Jeep Patriot Limited 2007-2010 Jeep Patriot Sport

The AEM 21-8216DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Durango and Chrysler Aspen models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and crank case breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8216DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007-2008 Chrysler Aspen Limited 2007-2008 Dodge Durango Adventurer 2007-2008 Dodge Durango Limited 2007-2008 Dodge Durango SLT 2007 Dodge Durango SXT

The AEM 21-8213DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Magnum, Charger and Chrysler 300 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and PCV breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8213DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2010 Chrysler 300 Limited 2010 Chrysler 300 S 2009 Chrysler 300 Signature Series 2005-2010 Chrysler 300 Touring 2006-2007 Dodge Charger Base 2006-2008 Dodge Charger Pursuit 2006-2008 Dodge Charger SE 2006-2008 Dodge Charger SXT 2007-2008 Dodge Magnum SE 2005-2008 Dodge Magnum SXT 2005 Dodge Magnum SXT Special Edition

The AEM 21-8211DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Ram 2500/3500 Pickup models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the air inlet temperature sensor and air filter restriction gauge. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. . Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8211DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003,2005-2006 Dodge Ram 2500 Laramie 2003-2006 Dodge Ram 2500 SLT 2006 Dodge Ram 2500 Sport 2003-2006 Dodge Ram 2500 ST 2006 Dodge Ram 2500 TRX4 2003-2006 Dodge Ram 3500 Laramie 2003-2006 Dodge Ram 3500 SLT 2006 Dodge Ram 3500 Sport 2003-2006 Dodge Ram 3500 ST

The AEM 21-820DS is an innovatively designed intake system to completely replace the restrictive air filter and airbox of some Infiniti QX30 models. The airbox has been crafted with premium materials and designed with 2 air scoops that feed from factory vent locations. It is aerodynamically engineered for better airflow, heat resistance, and improved aesthetics under the hood. The ECU is relocated underneath the airbox where a large vent keeps it cool. To clear the hood stand we incorporate a channel groove for a factory look on the air box. The AEM logo is showcased in a transparent badge, which also serves as a window to the filter so you know when it is time to have it serviced. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-785DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2017-2018 INFINITI QX30 Base 2019 INFINITI QX30 Essential 2019 INFINITI QX30 Luxe 2017-2018 INFINITI QX30 Luxury 2017-2018 INFINITI QX30 Premium 2019 INFINITI QX30 Pure 2017-2019 INFINITI QX30 Sport

The AEM 21-8208DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chrysler 300C, Dodge Magnum and Charger models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and engine cover breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8208DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2010 Chrysler 300 C 2010 Chrysler 300 S 2006 Dodge Charger Daytona R/T 2006-2008 Dodge Charger Pursuit 2006-2008 Dodge Charger R/T 2008 Dodge Charger SE 2005-2008 Dodge Magnum R/T

The AEM 21-8204DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Ram 2500/3500 Pickup models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the air filter restriction gauge. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8204DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1994-2002 Dodge Ram 2500 Base 1994-2002 Dodge Ram 3500 Base

The AEM 21-8204DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Dodge Ram 2500/3500 Pickup models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the air filter restriction gauge. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8204DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1994-2002 Dodge Ram 2500 Base 1994-2002 Dodge Ram 3500 Base

The AEM 21-819 Performance Cold Air Intake System replaces both the left and right side housings. This air intake was designed to fit some Infinity Q50 and Q60 models. Both banks uses an oval shaped AEM Dryflow Air Filter. The filter media is made from a synthetic fiber that does not require oiling. The filter also provides excellent filtration and has great air flow. Maintenance is easy since the filter can be used up to 100,000 miles before cleaning is needed (depending on driving conditions). Individual heatshields keep out engine bay heat . The factory MAF sensor mounts directly on the supplied intake tube. The air intake system it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-819 vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016 INFINITI Q50 Premium 2016 INFINITI Q50 Red Sport 400 2016 INFINITI Q50 Sport 2017 INFINITI Q60 Premium 2017 INFINITI Q60 Red Sport 400 2017 INFINITI Q60 Sport

The AEM 21-817C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Elantra Sport models. The oversized cone-shaped AEM Dry Flow filter is made from an oil-free, synthetic filter media and can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This system puts the air filter low and towards the front of the car where cooler air can be found. The cooler and denser air is then channeled through the mandrel-bent aluminum intake tube into the throttle body. The factory PCV and vent hoses mount directly on the intake tube using the existing spring clamps. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-817C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2018 Hyundai Elantra Sport

The 21-815C Performance Cold Air Intake System produces horsepower and torque gains by replacing the restrictive air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Audi A4 models. The cone shaped AEM Dryflow air filter is made of a synthetic media which requires no oil and can be used up to 100,000 miles before cleaning (depending on driving conditions). The two piece heat shield keeps hot engine air from entering the air intake system and directs cooler air using the factory inlet scoop. It has been designed to have more air capacity than the factory unit for better air flow. A clear AEM logo also doubles as a window to monitor if the filter needs servicing. The factory vacuum tube mounts directly on the intake tube. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-815C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2019 Audi A4 Premium 2017-2019 Audi A4 Premium Plus 2017-2019 Audi A4 Prestige 2019 Audi A4 Titanium 2017 Audi A4 Quattro Premium 2017 Audi A4 Quattro Premium Plus 2017 Audi A4 Quattro Prestige

The AEM 21-814C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This Air Intake System was designed, tuned and dyno-tested to fit specific Toyota Corolla models. The oversized cone-shaped AEM DryFlow filter is made from an oil-free, synthetic filter media and can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This system puts the air filter low and towards the front of the car on the drivers side where cooler air can be found. Cooler and denser air is then channeled through the mandrel-bent aluminum intake tube into the throttle body. The factory PCV and MAF sensor mount directly on the intake tube. Included is an extension harness for the MAF sensor and other hardware for installation. The Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-814C vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsInstallation InstructionsThis Part Fits: Year Make Model Submodel 2017 Toyota Corolla 50th Anniversary Special Edition 2017-2019 Toyota Corolla L 2017-2019 Toyota Corolla LE 2017-2019 Toyota Corolla LE Eco 2017-2019 Toyota Corolla SE 2017-2019 Toyota Corolla XLE 2017-2019 Toyota Corolla XSE

AEM Performance Cold Air Intake Systems produce horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cruze models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2021 Chevrolet Malibu L 2016-2025 Chevrolet Malibu LS 2016-2025 Chevrolet Malibu LT 2019-2025 Chevrolet Malibu RS

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Technical DrawingInstallation InstructionsThis Part Fits: Year Make Model Submodel 2021-2022,2024 Ford Expedition King Ranch 2021-2022,2024 Ford Expedition Limited 2021-2022,2024 Ford Expedition Max King Ranch 2021-2022,2024 Ford Expedition Max Limited 2021-2022,2024 Ford Expedition Max Platinum 2021-2022,2024 Ford Expedition Max SSV 2022 Ford Expedition Max XL 2021-2022,2024 Ford Expedition Max XLT 2021-2022,2024 Ford Expedition Platinum 2021-2022,2024 Ford Expedition SSV 2022,2024 Ford Expedition Timberline 2022 Ford Expedition XL 2024 Ford Expedition XL STX 2021-2022,2024 Ford Expedition XLT 2017-2024 Ford F-150 King Ranch 2017-2024 Ford F-150 Lariat 2017-2023 Ford F-150 Limited 2017-2024 Ford F-150 Platinum 2018-2024 Ford F-150 Police Responder 2017-2024 Ford F-150 Raptor 2017-2024 Ford F-150 SSV 2021-2024 Ford F-150 Tremor 2017-2024 Ford F-150 XL 2017-2024 Ford F-150 XLT

The AEM 21-8129DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F150 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the EVAP vent and crank case vent hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8129DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2020 Ford F-150 King Ranch 2015-2020 Ford F-150 Lariat 2015-2020 Ford F-150 Platinum 2016-2020 Ford F-150 SSV 2015-2020 Ford F-150 XL 2015-2020 Ford F-150 XLT

The AEM 21-8128DC Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F150 EcoBoost models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubes are constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the intake air temperature sensor. The dual intake AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8128DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Ford F-150 King Ranch 2015-2021 Ford F-150 Lariat 2016 Ford F-150 Limited 2015-2016 Ford F-150 Platinum 2016 Ford F-150 SSV 2015-2021 Ford F-150 XL 2015-2021 Ford F-150 XLT

The AEM 21-8122DC Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang GT models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is protected by an AEM embossed replacement air box which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crankcase vent tube. The oval cone shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8122DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2014 Ford Mustang Base 2012-2013 Ford Mustang Boss 302 2011-2014 Ford Mustang GT

The AEM 21-811C Performance Cold Air Intake System produces horsepower and torque gains by improving air flow and drawing in cooler, denser air. It all begins with a cone shaped AEM Dryflow filter which uses a synthetic filter media for outstanding air flow, filtration and performance. By relocating the air filter lower and to the front of the car, cooler and denser air can be accessed. Oiling the filter is not necessary and it can be used up to 100,000 miles before cleaning is needed (depending on driving conditions). Running up to the throttle body is the intake tube which is mandrel-bent to reduce airflow restriction at the bends. It is made of aluminum and is powder coated gray for lasting performance. The restrictive factory air pipe and air box are replaced with this free-flowing air intake system. The factory PCV valve and recirculation hose mount directly on the intake tube. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-811C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2016 Kia Forte Koup SX 2014-2016 Kia Forte5 EX 2016 Kia Forte5 LX 2014-2017 Kia Forte5 SX

The AEM 21-8114DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F250/F350 Super Duty and Excursion models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and filter minder gauge. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8114DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003 Ford Excursion Eddie Bauer 2000-2003 Ford Excursion Limited 2000-2003 Ford Excursion XLT 1999-2003 Ford F-250 Super Duty Lariat 1999-2003 Ford F-250 Super Duty XL 1999-2003 Ford F-250 Super Duty XLT 2003 Ford F-350 Super Duty King Ranch 1999-2003 Ford F-350 Super Duty Lariat 1999-2003 Ford F-350 Super Duty XL 1999-2003 Ford F-350 Super Duty XLT

The AEM 21-8111DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the MAF and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8111DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2005-2009 Ford Mustang Base

The AEM 21-8105DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8105DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1987-1993 Ford Mustang GT 1987-1993 Ford Mustang LX 1993 Ford Mustang SVT Cobra 1993 Ford Mustang SVT Cobra R

The AEM 21-8104DC Brute Force Air Intake System produces horsepower and torque gains for high displacement engines by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford F250/F350 Super Duty, F250/F350 Harley Davidson Super Duty and Excursion models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor, air filter status meter and air temperature sensor where equipped. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8104DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2003-2005 Ford Excursion Eddie Bauer 2003-2005 Ford Excursion Limited 2004-2005 Ford Excursion XLS 2003-2005 Ford Excursion XLT 2004-2005 Ford F-250 Super Duty Harley-Davidson Edition 2004-2006 Ford F-250 Super Duty King Ranch 2003-2006 Ford F-250 Super Duty Lariat 2003-2006 Ford F-250 Super Duty XL 2003-2006 Ford F-250 Super Duty XLT 2004-2005 Ford F-350 Super Duty Harley-Davidson Edition 2003-2006 Ford F-350 Super Duty King Ranch 2003-2006 Ford F-350 Super Duty Lariat 2003-2006 Ford F-350 Super Duty XL 2003-2006 Ford F-350 Super Duty XLT