The AEM 21-8103DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Ford Mustang GT models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the air filter assembly's original spot. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the MAF sensor, IAT sensor, IAC line and PCV line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8103DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1996-2004 Ford Mustang GT

The AEM 21-808C Performance Cold Air Intake System produces horsepower and torque gains by improving air flow and drawing in cooler, denser air. It all begins with a cone shaped AEM Dryflow filter which uses a synthetic filter media for outstanding air flow, filtration and performance. By relocating the air filter lower and to the front of the car, cooler and denser air can be accessed. Oiling the filter is not necessary and can be used up to 100,000 miles before cleaning is needed (depending on driving conditions). A heat shield then prevents exposure to radiant engine heat. Running up to the throttle body is the intake tube which is mandrel-bent to reduce airflow restriction at the bends. It is made of aluminum and is powder coated gray for lasting performance. Replacing the restrictive factory pipe and air intake housing with this Cold Air Intake system is an easy installation process and instructions are provided. The factory mass air flow sensor and crank case breather hose mount directly to the intake tube. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-808C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Subaru Legacy 2.5i 2015-2016 Subaru Legacy 2.5i Limited 2015-2016 Subaru Legacy 2.5i Premium 2015-2016 Subaru Outback 2.5i 2015-2016 Subaru Outback 2.5i Limited 2015-2016 Subaru Outback 2.5i Premium

The AEM 21-807C is designed to replace the restrictive air filter and airbox of specific Infiniti Q50 models. The oversized oval-shaped AEM Dry Flow filter is made from an oil-free, synthetic filter media and can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The AEM heatshield replaces the restrictive factory airbox, and uses the factory engine cover as it's top cover. To create a seal between the AEM heatshield/airbox and engine cover a rubber edge trim is included. The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-807C vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2016-2017 INFINITI Q50 Base 2018-2019 INFINITI Q50 Luxe 2016-2017 INFINITI Q50 Premium 2018-2019 INFINITI Q50 Pure 2017 INFINITI Q50 Sport

The AEM 21-806C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit select Lexus GS350 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-806C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2020 Lexus GS350 Base 2013-2020 Lexus GS350 F Sport 2014-2015 Lexus IS250 Base 2014-2015 Lexus IS250 C 2014-2015 Lexus IS250 C F Sport 2014-2015 Lexus IS250 F Sport 2013-2020 Lexus IS350 Base 2013-2015 Lexus IS350 C 2014-2015 Lexus IS350 C F Sport 2014-2021 Lexus IS350 F Sport 2015-2021 Lexus RC350 Base 2015-2021 Lexus RC350 F Sport

AEM Performance Cold Air Intake Systems produce horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cruze models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2019 Chevrolet Cruze L 2017-2019 Chevrolet Cruze LS 2017-2019 Chevrolet Cruze LT 2017-2019 Chevrolet Cruze Premier

The AEM-21-804C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Toyota Yaris iA and Scion iA models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and PCV line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2017 Mazda CX-3 Grand Touring 2016-2017 Mazda CX-3 Sport 2016-2017 Mazda CX-3 Touring 2016 Scion iA Base 2017,2020 Toyota Yaris L 2017,2020 Toyota Yaris LE 2017 Toyota Yaris SE 2020 Toyota Yaris XLE 2017-2018 Toyota Yaris iA Base

This AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Malibu models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and PCV line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016 Chevrolet Malibu LT 2016-2022 Chevrolet Malibu Premier 2016-2017 Volkswagen GTI Autobahn 2016-2017 Volkswagen GTI S 2016-2017 Volkswagen GTI SE 2017 Volkswagen GTI Sport

The AEM 21-8032DS Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Silverado 1500 and GMC Sierra 1500 models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in a replacement AEM embossed air box which is designed to reduce intake air temperature and increase horsepower. The intake tubing is an aerodynamically engineered and highly durable polyethylene tube. This air intake system was developed to accommodate the engine's factory emissions control devices including the MAF as well as a couple of replacement engine breather hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8032DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2019 Chevrolet Silverado 1500 LD Custom 2019 Chevrolet Silverado 1500 LD LT 2019 Chevrolet Silverado 1500 LD WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT 2019 GMC Sierra 1500 Limited Base 2019 GMC Sierra 1500 Limited SLE

The AEM 21-8030DC Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific vehicle models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a replacement air box with an AEM logo embossed lid which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable black powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV line as well as a replacement AEM filter minder. The oval cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. . Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8030DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2009-2013 Cadillac Escalade Base 2011-2013 Cadillac Escalade Luxury 2009-2013 Cadillac Escalade Platinum 2011-2013 Cadillac Escalade Premium 2009-2013 Cadillac Escalade ESV Base 2011-2013 Cadillac Escalade ESV Luxury 2009-2013 Cadillac Escalade ESV Platinum 2011-2013 Cadillac Escalade ESV Premium 2009-2013 Cadillac Escalade EXT Base 2011-2013 Cadillac Escalade EXT Luxury 2011-2013 Cadillac Escalade EXT Premium 2013 Chevrolet Avalanche Black Diamond LS 2013 Chevrolet Avalanche Black Diamond LT 2013 Chevrolet Avalanche Black Diamond LTZ 2009-2012 Chevrolet Avalanche LS 2009-2012 Chevrolet Avalanche LT 2009-2012 Chevrolet Avalanche LTZ 2009-2013 Chevrolet Silverado 1500 LS 2009-2013 Chevrolet Silverado 1500 LT 2009-2013 Chevrolet Silverado 1500 LTZ 2009-2013 Chevrolet Silverado 1500 WT 2010-2013 Chevrolet Silverado 1500 XFE 2009-2014 Chevrolet Suburban 1500 LS 2009-2014 Chevrolet Suburban 1500 LT 2009-2014 Chevrolet Suburban 1500 LTZ 2009-2014 Chevrolet Tahoe LS 2009-2014 Chevrolet Tahoe LT 2009-2014 Chevrolet Tahoe LTZ 2009-2014 Chevrolet Tahoe PPV 2012-2014 Chevrolet Tahoe SSV 2009-2013 GMC Sierra 1500 Denali 2009-2013 GMC Sierra 1500 SL 2009-2013 GMC Sierra 1500 SLE 2009-2013 GMC Sierra 1500 SLT 2009-2013 GMC Sierra 1500 WT 2010-2013 GMC Sierra 1500 XFE 2009-2014 GMC Yukon Denali 2009-2014 GMC Yukon SLE 2009-2014 GMC Yukon SLT 2009-2013 GMC Yukon XL 1500 Denali 2009-2014 GMC Yukon XL 1500 SLE 2009-2014 GMC Yukon XL 1500 SLT

AEM Cold Air Intake Systems are designed to produce horsepower and torque gains. They replace the restrictive factory airbox and air filter to give you better performance and better engine sound. AEM cold air intakes relocate the air filter outside the engine compartment so cooler air can be fed into your engine. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber for more horsepower and torque. AEM Cold Air Intakes include an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance while allowing easy oil-free cleaning. They include a mandrel-bent aluminum intake tube and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. This Air Intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2020 Audi A3 Premium 2016-2020 Audi A3 Premium Plus 2016-2019 Audi A3 Prestige 2015-2016 Audi A3 TDI Premium 2015-2016 Audi A3 TDI Premium Plus 2015-2016 Audi A3 TDI Prestige 2019 Audi A3 Titanium 2015-2020 Audi A3 Quattro Premium 2015-2020 Audi A3 Quattro Premium Plus 2015-2019 Audi A3 Quattro Prestige 2018-2022 Audi Q3 Premium 2018-2022 Audi Q3 Premium Plus 2019 Audi Q3 Prestige 2020-2022 Audi Q3 S-Line Premium 2020-2022 Audi Q3 S-Line Premium Plus 2020 Audi Q3 S-Line Prestige 2020 Audi S3 Premium 2017-2020 Audi S3 Premium Plus 2017-2019 Audi S3 Prestige 2019-2021 Volkswagen Arteon SE 2019,2022 Volkswagen Arteon SE R-Line 2019-2020 Volkswagen Arteon SEL 2019 Volkswagen Arteon SEL Premium 2019-2022 Volkswagen Arteon SEL Premium R-Line 2019-2022 Volkswagen Arteon SEL R-Line 2017-2018 Volkswagen Golf S 2018 Volkswagen Golf SE 2017 Volkswagen Golf Wolfsburg Edition 2019 Volkswagen Golf Alltrack S 2019 Volkswagen Golf Alltrack SE 2019 Volkswagen Golf Alltrack SEL 2016-2019 Volkswagen Golf R Base 2019 Volkswagen Golf SportWagen S 2023 Volkswagen GTI 40th Anniversary Edition 2016-2023 Volkswagen GTI Autobahn 2019 Volkswagen GTI Rabbit Edition 2016-2023 Volkswagen GTI S 2016-2023 Volkswagen GTI SE 2017 Volkswagen GTI Sport 2019 Volkswagen Jetta GLI 35th Anniversary Edition 2019-2023 Volkswagen Jetta GLI Autobahn 2019-2021 Volkswagen Jetta GLI S

The AEM 21-8026DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and valve cover hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8026DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2007-2008 Chevrolet Silverado 2500 HD LT 2007-2008 Chevrolet Silverado 2500 HD LTZ 2007-2008 Chevrolet Silverado 2500 HD WT 2007 Chevrolet Silverado 2500 HD Classic LS 2007 Chevrolet Silverado 2500 HD Classic LT 2007 Chevrolet Silverado 2500 HD Classic WT 2007-2008 Chevrolet Silverado 3500 HD LT 2007-2008 Chevrolet Silverado 3500 HD LTZ 2007-2008 Chevrolet Silverado 3500 HD WT 2007-2008 GMC Sierra 2500 HD SLE 2007-2008 GMC Sierra 2500 HD SLT 2007-2008 GMC Sierra 2500 HD WT 2007 GMC Sierra 2500 HD Classic SL 2007 GMC Sierra 2500 HD Classic SLE 2007 GMC Sierra 2500 HD Classic SLT 2007 GMC Sierra 2500 HD Classic WT 2007-2008 GMC Sierra 3500 HD SLE 2007-2008 GMC Sierra 3500 HD SLT 2007-2008 GMC Sierra 3500 HD WT

The AEM 21-8018DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hummer H3, GMC Canyon and Chevrolet Colorado models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine breather hoses. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8018DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 2004 Chevrolet Colorado Base 2004 Chevrolet Colorado LS 2006 Chevrolet Colorado LT 2004-2005 Chevrolet Colorado Sport 2004-2005 Chevrolet Colorado Sport LS 2006 Chevrolet Colorado WT 2004-2005 Chevrolet Colorado Z71 2004-2005 Chevrolet Colorado Z71 LS 2004-2005 Chevrolet Colorado Z85 2004-2005 Chevrolet Colorado Z85 LS 2004 GMC Canyon SL 2004,2006 GMC Canyon SLE 2006 GMC Canyon SLT 2006 GMC Canyon WT 2004-2005 GMC Canyon Z71 Fleet 2004-2005 GMC Canyon Z71 SL 2004-2005 GMC Canyon Z71 SLE 2004-2005 GMC Canyon Z85 SL 2004-2005 GMC Canyon Z85 SLE 2006 Hummer H3 Base

The AEM 21-800C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda HR-V models. Air enters the system through an oversized oval AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the front of your car near incoming air to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and crank case breather hose. The oval shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-800C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2016-2022 Honda HR-V EX 2016-2022 Honda HR-V EX-L 2016-2022 Honda HR-V LX 2019-2022 Honda HR-V Sport 2019-2020 Honda HR-V Touring

The AEM 21-8009DP Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific GMC Sonoma and Chevrolet S10 Pickup models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable chrome-like finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and engine cover breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8009DP vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1998-2003 Chevrolet S10 Base 1998-2003 Chevrolet S10 LS 1999-2003 Chevrolet S10 Xtreme 2002-2003 Chevrolet S10 ZR5 1998-2003 GMC Sonoma SL 1998-2001 GMC Sonoma SLE 1998-2003 GMC Sonoma SLS

The AEM 21-8009DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific GMC Sonoma and Chevrolet S10 Pickup models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the driver-side wheel well and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the IAT sensor and engine cover breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-8009DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1998-2003 Chevrolet S10 Base 1998-2003 Chevrolet S10 LS 1999-2003 Chevrolet S10 Xtreme 2002-2003 Chevrolet S10 ZR5 1998-2003 GMC Sonoma SL 1998-2001 GMC Sonoma SLE 1998-2003 GMC Sonoma SLS

The AEM 21-8001DC Brute Force Air Intake System produces horsepower and torque gains by replacing the vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific vehicle models. Air enters the system through an extra-large AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger side fender well and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tube connects to an AEM intake plenum which replaces the stock air cleaner housing and directs air evenly into the engine throttle body. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-8001DC vehicle applications to determine the legal status for each vehicle.Installation InstructionsThis Part Fits: Year Make Model Submodel 1994 Chevrolet Blazer Base 1992-1993 Chevrolet Blazer Cheyenne 1992-1994 Chevrolet Blazer Silverado 1994 Chevrolet Blazer Silverado Sport 1994-1995 Chevrolet C1500 Base 1988-1995 Chevrolet C1500 Cheyenne 1988-1992 Chevrolet C1500 Scottsdale 1988-1995 Chevrolet C1500 Silverado 1990-1995 Chevrolet C1500 WT 1992-1995 Chevrolet C1500 Suburban Base 1995 Chevrolet C1500 Suburban LS 1995 Chevrolet C1500 Suburban LT 1992-1994 Chevrolet C1500 Suburban Silverado 1994-1995 Chevrolet C2500 Base 1988-1995 Chevrolet C2500 Cheyenne 1988-1992 Chevrolet C2500 Scottsdale 1988-1995 Chevrolet C2500 Silverado 1994-1995 Chevrolet C2500 WT 1992-1995 Chevrolet C2500 Suburban Base 1995 Chevrolet C2500 Suburban LS 1995 Chevrolet C2500 Suburban LT 1992-1994 Chevrolet C2500 Suburban Silverado 1994-1995 Chevrolet C3500 Base 1988-1995 Chevrolet C3500 Cheyenne 1988-1992 Chevrolet C3500 Scottsdale 1988-1995 Chevrolet C3500 Silverado 1994-1995 Chevrolet K1500 Base 1988-1995 Chevrolet K1500 Cheyenne 1988-1992 Chevrolet K1500 Scottsdale 1988-1995 Chevrolet K1500 Silverado 1991 Chevrolet K1500 Sport 1990-1995 Chevrolet K1500 WT 1992-1995 Chevrolet K1500 Suburban Base 1995 Chevrolet K1500 Suburban LS 1995 Chevrolet K1500 Suburban LT 1992-1994 Chevrolet K1500 Suburban Silverado 1994-1995 Chevrolet K2500 Base 1988-1995 Chevrolet K2500 Cheyenne 1988-1992 Chevrolet K2500 Scottsdale 1988-1995 Chevrolet K2500 Silverado 1994-1995 Chevrolet K2500 WT 1992-1995 Chevrolet K2500 Suburban Base 1995 Chevrolet K2500 Suburban LS 1995 Chevrolet K2500 Suburban LT 1992-1994 Chevrolet K2500 Suburban Silverado 1994-1995 Chevrolet K3500 Base 1988-1995 Chevrolet K3500 Cheyenne 1988-1992 Chevrolet K3500 Scottsdale 1988-1995 Chevrolet K3500 Silverado 1988 Chevrolet R20 Cheyenne 1988 Chevrolet R20 Custom Deluxe 1988 Chevrolet R20 Scottsdale 1988 Chevrolet R20 Silverado 1988 Chevrolet R30 Cheyenne 1988 Chevrolet R30 Custom Deluxe 1988 Chevrolet R30 Scottsdale 1988 Chevrolet R30 Silverado 1989-1991 Chevrolet R3500 Cheyenne 1989-1990 Chevrolet R3500 Scottsdale 1989-1991 Chevrolet R3500 Silverado 1995 Chevrolet Tahoe Base 1995 Chevrolet Tahoe LS 1995 Chevrolet Tahoe LT 1989-1991 Chevrolet V3500 Cheyenne 1989-1990 Chevrolet V3500 Scottsdale 1989-1991 Chevrolet V3500 Silverado 1988-1993 GMC C1500 Sierra 1994-1995 GMC C1500 Sierra SL 1988-1995 GMC C1500 Sierra SLE 1994-1995 GMC C1500 Sierra SLT 1988-1993 GMC C1500 Sierra SLX 1994-1995 GMC C1500 Sierra Special 1992-1995 GMC C1500 Suburban Base 1992-1995 GMC C1500 Suburban SLE 1995 GMC C1500 Suburban SLT 1988-1993 GMC C2500 Sierra 1994-1995 GMC C2500 Sierra SL 1988-1995 GMC C2500 Sierra SLE 1994-1995 GMC C2500 Sierra SLT 1988-1993 GMC C2500 Sierra SLX 1992 GMC C2500 Suburban SLE 1988-1993 GMC C3500 Sierra 1994-1995 GMC C3500 Sierra SL 1988-1995 GMC C3500 Sierra SLE 1994-1995 GMC C3500 Sierra SLT 1988-1993 GMC C3500 Sierra SLX 1988-1991 GMC Jimmy Base 1988-1990 GMC Jimmy Sierra Classic 1988-1993 GMC K1500 Sierra 1994-1995 GMC K1500 Sierra SL 1988-1995 GMC K1500 Sierra SLE 1995 GMC K1500 Sierra SLS 1994-1995 GMC K1500 Sierra SLT 1988-1993 GMC K1500 Sierra SLX 1994-1995 GMC K1500 Sierra Special 1993 GMC K1500 Sierra Sport 1992-1995 GMC K1500 Suburban Base 1992-1995 GMC K1500 Suburban SLE 1995 GMC K1500 Suburban SLT 1988-1993 GMC K2500 Sierra 1994-1995 GMC K2500 Sierra SL 1988-1995 GMC K2500 Sierra SLE 1994-1995 GMC K2500 Sierra SLT 1988-1993 GMC K2500 Sierra SLX 1992-1995 GMC K2500 Suburban Base 1992-1995 GMC K2500 Suburban SLE 1995 GMC K2500 Suburban SLT 1988-1993 GMC K3500 Sierra 1994-1995 GMC K3500 Sierra SL 1988-1995 GMC K3500 Sierra SLE 1994-1995 GMC K3500 Sierra SLT 1988-1993 GMC K3500 Sierra SLX 1988-1989 GMC R2500 Base 1988-1989 GMC R2500 High Sierra 1988-1989 GMC R2500 Sierra Classic 1988-1991 GMC R3500 Base 1988-1989 GMC R3500 High Sierra 1988-1989 GMC R3500 Sierra Classic 1990-1991 GMC R3500 SLE 1988-1991 GMC V3500 Base 1988-1989 GMC V3500 High Sierra 1988-1989 GMC V3500 Sierra Classic 1990-1991 GMC V3500 SLE 1992-1995 GMC Yukon Base 1993 GMC Yukon GT 1992-1995 GMC Yukon SLE 1995 GMC Yukon SLT 1992,1994 GMC Yukon Sport

The AEM 21-681C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Audi A4 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-681C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2002-2006 Cadillac Escalade Base 2003-2006 Cadillac Escalade ESV Base 2002-2006 Cadillac Escalade EXT Base 2002-2005 Chevrolet Avalanche 1500 Base 2005-2006 Chevrolet Avalanche 1500 LS 2005-2006 Chevrolet Avalanche 1500 LT 2002-2003 Chevrolet Avalanche 1500 North Face 2002-2003 Chevrolet Avalanche 1500 On Road Edition 2003 Chevrolet Avalanche 1500 WBH 2004-2006 Chevrolet Avalanche 1500 Z66 2002-2006 Chevrolet Avalanche 1500 Z71 1999-2005 Chevrolet Silverado 1500 Base 2004-2006 Chevrolet Silverado 1500 Hybrid 1999-2006 Chevrolet Silverado 1500 LS 1999-2006 Chevrolet Silverado 1500 LT 2003-2006 Chevrolet Silverado 1500 SS 2002-2006 Chevrolet Silverado 1500 WT 2004-2005 Chevrolet Silverado 1500 Z71 Off-Road 2007 Chevrolet Silverado 1500 Classic Hybrid 2007 Chevrolet Silverado 1500 Classic LS 2007 Chevrolet Silverado 1500 Classic LT 2007 Chevrolet Silverado 1500 Classic SS 2007 Chevrolet Silverado 1500 Classic WT 2005 Chevrolet Silverado 1500 HD Base 2001-2003,2005 Chevrolet Silverado 1500 HD LS 2001-2003,2005-2006 Chevrolet Silverado 1500 HD LT 2007 Chevrolet Silverado 1500 HD Classic LT 1999-2004 Chevrolet Silverado 2500 Base 1999-2004 Chevrolet Silverado 2500 LS 1999-2004 Chevrolet Silverado 2500 LT 2004 Chevrolet Silverado 2500 WT 2001-2005 Chevrolet Silverado 2500 HD Base 2001-2006 Chevrolet Silverado 2500 HD LS 2001-2006 Chevrolet Silverado 2500 HD LT 2003-2006 Chevrolet Silverado 2500 HD WT 2007 Chevrolet Silverado 2500 HD Classic LS 2007 Chevrolet Silverado 2500 HD Classic LT 2007 Chevrolet Silverado 2500 HD Classic WT 2001-2005 Chevrolet Silverado 3500 Base 2001-2006 Chevrolet Silverado 3500 LS 2001-2006 Chevrolet Silverado 3500 LT 2004,2006 Chevrolet Silverado 3500 WT 2000-2001,2006 Chevrolet Suburban 1500 Base 2000-2006 Chevrolet Suburban 1500 LS 2000-2006 Chevrolet Suburban 1500 LT 2006 Chevrolet Suburban 1500 LTZ 2002-2006 Chevrolet Suburban 1500 Z71 2000-2001 Chevrolet Suburban 2500 Base 2000-2006 Chevrolet Suburban 2500 LS 2000-2006 Chevrolet Suburban 2500 LT 2000-2001,2006 Chevrolet Tahoe Base 2000-2006 Chevrolet Tahoe LS 2000-2006 Chevrolet Tahoe LT 2002-2006 Chevrolet Tahoe Z71 2002-2005 GMC Sierra 1500 Base 2001 GMC Sierra 1500 C3 2002-2006 GMC Sierra 1500 Denali 2002 GMC Sierra 1500 HT 2005-2006 GMC Sierra 1500 Hybrid 1999-2003,2006 GMC Sierra 1500 SL 1999-2006 GMC Sierra 1500 SLE 1999-2006 GMC Sierra 1500 SLT 2002-2006 GMC Sierra 1500 WT 2007 GMC Sierra 1500 Classic Denali 2007 GMC Sierra 1500 Classic Hybrid 2007 GMC Sierra 1500 Classic SL 2007 GMC Sierra 1500 Classic SLE 2007 GMC Sierra 1500 Classic SLT 2007 GMC Sierra 1500 Classic WT 2001-2003,2005-2006 GMC Sierra 1500 HD SLE 2001-2003,2005-2006 GMC Sierra 1500 HD SLT 2007 GMC Sierra 1500 HD Classic SLE 2007 GMC Sierra 1500 HD Classic SLT 2002-2004 GMC Sierra 2500 Base 1999-2002 GMC Sierra 2500 SL 1999-2004 GMC Sierra 2500 SLE 1999-2004 GMC Sierra 2500 SLT 2003-2004 GMC Sierra 2500 WT 2002-2005 GMC Sierra 2500 HD Base 2001-2002,2006 GMC Sierra 2500 HD SL 2001-2006 GMC Sierra 2500 HD SLE 2001-2006 GMC Sierra 2500 HD SLT 2003-2006 GMC Sierra 2500 HD WT 2007 GMC Sierra 2500 HD Classic SL 2007 GMC Sierra 2500 HD Classic SLE 2007 GMC Sierra 2500 HD Classic SLT 2007 GMC Sierra 2500 HD Classic WT 2002-2005 GMC Sierra 3500 Base 2001-2002,2006 GMC Sierra 3500 SL 2001-2006 GMC Sierra 3500 SLE 2001-2006 GMC Sierra 3500 SLT 2004-2006 GMC Sierra 3500 WT 2007 GMC Sierra 3500 Classic SL 2007 GMC Sierra 3500 Classic SLE 2007 GMC Sierra 3500 Classic SLT 2007 GMC Sierra 3500 Classic WT 2001-2006 GMC Yukon Denali 2006 GMC Yukon SL 2000-2006 GMC Yukon SLE 2000-2006 GMC Yukon SLT 2001-2006 GMC Yukon XL 1500 Denali 2006 GMC Yukon XL 1500 SL 2002-2006 GMC Yukon XL 1500 SLE 2002-2006 GMC Yukon XL 1500 SLT 2000-2006 GMC Yukon XL 2500 SLE 2000-2006 GMC Yukon XL 2500 SLT

The AEM 21-799C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Sentra models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed under the original air box space and above the driver-side wheel well which is designed to pull in cooler outside air and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM 21-799C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2013-2016 Nissan Sentra FE+S 2013-2014 Nissan Sentra FE+SV 2013-2019 Nissan Sentra S 2013-2019 Nissan Sentra SL 2013-2019 Nissan Sentra SR 2013-2019 Nissan Sentra SV

The AEM 21-798C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed under the original air box space and above the driver-side wheel well which is designed to pull in cooler outside air and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM 21-798C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1User 1This Part Fits: Year Make Model Submodel 2017-2021 Honda Civic EX 2016-2021 Honda Civic EX-L 2016-2018 Honda Civic EX-T 2017-2021 Honda Civic LX 2017 Honda Civic Si 2017-2021 Honda Civic Sport 2017-2021 Honda Civic Sport Touring 2016-2021 Honda Civic Touring

This Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016 Volkswagen Jetta Hybrid SEL Premium 2016-2018 Volkswagen Jetta S 2016-2018 Volkswagen Jetta SE 2018 Volkswagen Jetta Wolfsburg Edition

The AEM 21-796C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Genesis Sedan models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the pressure sensor and vent tubes. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-796C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Hyundai Genesis 3.8

The AEM 21-795C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Pilot and Ridgeline models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and vent tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-795C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2024 Honda Passport Black Edition 2019-2023 Honda Passport Elite 2019-2024 Honda Passport EX-L 2019-2021 Honda Passport Sport 2019-2021 Honda Passport Touring 2022-2024 Honda Passport TrailSport 2020-2022 Honda Pilot Black Edition 2016-2022 Honda Pilot Elite 2016-2021 Honda Pilot EX 2016-2022 Honda Pilot EX-L 2016-2021 Honda Pilot LX 2021-2022 Honda Pilot Special Edition 2022 Honda Pilot Sport 2016-2022 Honda Pilot Touring 2022 Honda Pilot TrailSport 2017-2025 Honda Ridgeline Black Edition 2017-2019 Honda Ridgeline RT 2017-2025 Honda Ridgeline RTL 2017-2023 Honda Ridgeline RTL-E 2017-2019 Honda Ridgeline RTL-T 2017 Honda Ridgeline RTS 2017-2025 Honda Ridgeline Sport 2024-2025 Honda Ridgeline TrailSport

The AEM 21-793C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Nissan Maxima models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine vent hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-793C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2021 Nissan Maxima 40th Anniversary Edition 2016-2023 Nissan Maxima Platinum 2020 Nissan Maxima Platinum Reserve 2016-2020 Nissan Maxima S 2016-2020 Nissan Maxima SL 2016-2023 Nissan Maxima SR 2016-2023 Nissan Maxima SV

The AEM 21-792C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Honda Civic models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine vent line. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-792C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2020 Honda Civic EX 2016-2021 Honda Civic LX 2016-2018 Honda Civic LX-P 2019-2021 Honda Civic Sport 2017 Honda Civic Type R

The AEM-21-791C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Lexus IS200T L4 2.0L models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the valve cover breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the AEM-21-791C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2017 Lexus IS200t Base 2016-2017 Lexus IS200t F Sport 2018-2024 Lexus IS300 Base 2018-2020,2024 Lexus IS300 F Sport 2024 Lexus IS300 F Sport Design

The AEM 21-788C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Sonic models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-788C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Sonic LS 2012-2020 Chevrolet Sonic LT 2012-2016 Chevrolet Sonic LTZ 2017-2020 Chevrolet Sonic Premier 2013-2016 Chevrolet Sonic RS

The AEM 21-787C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Lexus NX200T models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is placed into the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and engine vent lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-787C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2017 Lexus NX200t Base 2015-2017 Lexus NX200t F Sport

The AEM-21-786C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit select Mazda MX-5 Miata models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. Attached to the heat shield is an aluminum coolant overflow reservoir that replaces the stock reservoir so that the air intake will fit properly. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-786C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2020 Mazda MX-5 Miata 100th Anniversary Special Edition 2016-2022 Mazda MX-5 Miata Club 2016-2022 Mazda MX-5 Miata Grand Touring 2020 Mazda MX-5 Miata RF 100th Anniversary Special Edition 2017-2022 Mazda MX-5 Miata RF Club 2017-2022 Mazda MX-5 Miata RF Grand Touring 2016-2022 Mazda MX-5 Miata Sport

The AEM 21-784C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Acura ILX models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box location and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-784C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2019 Acura ILX Base

The AEM 21-783C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Hyundai Tucson models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the EVAP and other vent lines. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-783C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2016-2017 Hyundai Tucson Eco 2016-2017 Hyundai Tucson Limited 2016-2017 Hyundai Tucson Sport 2017 Hyundai Tucson Value

The AEM 21-781DS Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mercedes Benz CLA250 models. Air enters the system from the factory fresh air inlets, through replacement air ducts and into a roto-molded, aerodynamic AEM air box containing an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. This air intake system was developed to accommodate the engine's factory emissions control devices including the ECU. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-781DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2019 Mercedes-Benz CLA250 4Matic 2014-2019 Mercedes-Benz CLA250 Base 2015-2020 Mercedes-Benz GLA250 4Matic 2015-2020 Mercedes-Benz GLA250 Base

This Performance Air Intake System allows your engine to breathe more air compared to the restrictive factory air intake housing. It is designed, tuned and dyno-tested to produce more horsepower and torque. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. A custom shaped heat shield with a carbon fiber lid is included. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). This Air Intake System is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-780C vehicle applications to determine the legal status for each vehicle.Installation InstructionsTechnical DrawingThis Part Fits: Year Make Model Submodel 2022-2023 Lexus IS500 F Sport Performance 2022 Lexus IS500 F Sport Performance Launch Edition 2022-2023 Lexus IS500 F Sport Performance Premium 2015-2018 Lexus RC F Base

The AEM Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass airflow sensor and breather tube. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2017-2018 Mazda 3 Grand Touring 2014-2016 Mazda 3 s Grand Touring 2014-2016 Mazda 3 s Touring 2017-2018 Mazda 3 Touring 2014-2020 Mazda 6 Grand Touring 2018-2020 Mazda 6 Signature 2014-2021 Mazda 6 Sport 2014-2021 Mazda 6 Touring 2017 Mazda CX-5 Grand Select 2015-2017 Mazda CX-5 Grand Touring 2015-2017 Mazda CX-5 Sport 2015-2017 Mazda CX-5 Touring

The AEM 21-778C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to be in driver-side wheel well which is designed to reduce intake air temperature and increase horsepower. The lower air intake tube is a free-flowing, mandrel-bent aluminum tube with a durable gunmetal gray powder coat finish. The upper air intake tube is a roto-molded, aerodynamically engineered, HDPE tube that insulates the cooler intake air from heat as it passes through the engine bay and into the engine's throttle body. This air intake system was developed to accommodate the Lancer's factory emissions control devices including the mass airflow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-778C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2017 Mitsubishi Lancer ES 2015 Mitsubishi Lancer Evolution GSR 2015-2016 Mitsubishi Lancer GT 2015-2017 Mitsubishi Lancer SE 2016-2017 Mitsubishi Lancer SEL

The AEM-21-774DS Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filters and air intake housings. This air intake system was designed, tuned and dyno-tested to fit select Infiniti Q50 models. Air enters the system through dual AEM Dryflow synthetic washable air filters for outstanding air flow, filtration and performance. The air filters are located in the original air box spaces and are protected by heat shields which are designed to reduce intake air temperature and increase horsepower. Air is then fed to the engine through not one, but two air intake tubes. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensors and crankcase vent tube. The dual tapered cylinder shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 21-774DS vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2014-2015 INFINITI Q50 Base 2014-2015 INFINITI Q50 Premium 2014-2015 INFINITI Q50 Sport

The AEM 21-773C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Mazda Mazda3 models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original airbox space and is protected by a heat shield which is designed to reduce intake air temperature and adapts to the factory cold air scoop. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air sensor and engine breather hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools and it is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-773C vehicle applications to determine the legal status for each vehicle.Installation InstructionsUser 1This Part Fits: Year Make Model Submodel 2015-2016 Mazda 3 i Grand Touring 2015-2016 Mazda 3 I Sport 2015 Mazda 3 i SV 2015-2016 Mazda 3 I Touring 2017-2018 Mazda 3 Sport 2017-2018 Mazda 3 Touring