COMP Cams Rotator Eliminators CB Exh.
$61.95
Avoid stacking .300" of shims under the valve springs on your Big Block Chevrolet with our seat spacers. These spacers feature a 1.732" outer diameter for 1.568" outer diameter springs.CatalogUser 1
COMP Cams Rotator Eliminator Eb CB Exh
$409.95
The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not only protect the head and shim but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup. Many sizes are available to locate from the inside or outside diameter.User 1
COMP Cams Rotator Eliminator CB Exh
$11.95
Avoid stacking .300" of shims under the valve spring on your Big Block Chevrolet with our seat spacer. This spacer features a 1.732" outer diameter for 1.568" outer diameter springs.CatalogUser 1
COMP Cams ID Spring Seats 1.55 X 570 X
$64.95
Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4778 features a 1.550" OD and a .570" ID that works well with our 938 and 927 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats Eb 1.55 X 570
$278.95
The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not only protect the head and shim but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup. Many sizes are available to locate from the inside or outside diameter.User 1
COMP Cams ID Spring Seat 1.55 X 570 X 7
$10.95
Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4778 features a 1.550" OD and a .570" ID that works well with our 938 and 927 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats 1.55 X 630 X
$64.95
Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4777 features a 1.540" OD and a .640" ID that works well with our 26089, 955 and 943 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats Eb 1.55 X 630
$278.95
The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not only protect the head and shim but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup. Many sizes are available to locate from the inside or outside diameter.User 1
COMP Cams ID Spring Seat 1.55 X 630 X 7
$10.95
Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4777 features a 1.540" OD and a .640" ID that works well with our 26089, 955 and 943 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats 1.55 X 570 X
$64.95
Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4776 features a 1.550" OD and a .570" ID that works well with our 928, 944, 26089 and 955 springs.CatalogUser 1
COMP Cams ID Spring Seats Eb 1.55 X 570
$278.95
The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not only protect the head and shim but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup. Many sizes are available to locate from the inside or outside diameter.User 1
COMP Cams ID Spring Seat 1.55 X 570 X 7
$10.95
Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4776 features a 1.550" OD and a .570" ID that works well with our 928, 944, 26089 and 955 springs.CatalogUser 1
COMP Cams ID Spring Seats 1.625 X 630 X
$75.95
Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4775 features a 1.540" OD and a .640" ID that works well with our 996, 998, 26099 and 991 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats Eb 1.625 X 63
$259.95
The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not only protect the head and shim but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup. Many sizes are available to locate from the inside or outside diameter.User 1
COMP Cams ID Spring Seat 1.625 X 630 X
$10.95
Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4775 features a 1.540" OD and a .640" ID that works well with our 996, 998, 26099 and 991 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats 1.625 X 570
$64.95
Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4774 features a 1.625" OD and a .570" ID that works well with our 996, 998, 26099 and 991 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats Eb 1.625 X 57
$278.95
The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not only protect the head and shim but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup. Many sizes are available to locate from the inside or outside diameter.User 1
COMP Cams ID Spring Seat 1.625 X 570 X
$10.95
Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4774 features a 1.625" OD and a .570" ID that works well with our 996, 998, 26099 and 991 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats 1.5 X 630 X
$64.95
Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4773 features a 1.540" OD and a .640" ID that works well with our 932, 935 and 26094 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats Eb 1.5 X 630
$278.95
The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not only protect the head and shim but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup. Many sizes are available to locate from the inside or outside diameter.User 1
COMP Cams ID Spring Seat 1.5 X 630 X 75
$10.95
Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4773 features a 1.540" OD and a .640" ID that works well with our 932, 935 and 26094 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats 1.5 X 570 X 7
$18.95
ID Spring Locator Set of 4 - 1.550" OD, .570" ID, .060" ThickUser 1
COMP Cams ID Spring Seats 1.5 X 570 X
$64.95
Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4772 features a 1.550" OD and a .570" ID that works well with our 925 and 939 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats Eb 1.5 X 570
$278.95
The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not only protect the head and shim but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup. Many sizes are available to locate from the inside or outside diameter.User 1
COMP Cams ID Spring Seat 1.5 X 570 X 75
$10.95
Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4772 features a 1.550" OD and a .570" ID that works well with our 925 and 939 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats 1.5 X 570 X 6
$64.95
Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4771 features a 1.550" OD and a .570" ID that works well with our 925 and 939 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats Eb 1.5 X 570
$278.95
The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not only protect the head and shim but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup. Many sizes are available to locate from the inside or outside diameter.User 1
COMP Cams ID Spring Seat 1.5 X 570 X 69
$10.95
Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4771 features a 1.550" OD and a .570" ID that works well with our 925 and 939 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats 1.50 X 585 X
$18.95
ID Spring Locator Set of 4 - 1.500" OD, .585" ID, .060" ThickUser 1
COMP Cams ID Spring Seats 1.50 X 585 X
$64.95
Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4770 features a 1.500" OD and a .585" ID that works well with our 985, 978, 924 and 939 dual valve springs.CatalogUser 1
COMP Cams ID Spring Seats 1.50 X 585 X
$47.95
ID Spring Locator Set of 12- 1.500" OD, .585" ID, .060" ThicknessUser 1
COMP Cams ID Spring Seats Eb 1.50 X 585
$278.95
The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not only protect the head and shim but also locate and hold the spring in place. Previously, this part has been available only in a cup form with the retaining portion being on the outside of the part. This required that the head be machined a great deal to accept this cup so COMP now offers an I.D. locator with the locating shoulder on the inside, as well as the spring cup. Many sizes are available to locate from the inside or outside diameter.User 1
COMP Cams ID Sprng Seat 1.50 X 585 X 69
$10.95
Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4770 features a 1.500" OD and a .585" ID that works well with our 985, 978, 924 and 939 dual valve springs.CatalogUser 1
COMP Cams Spring Seat Cups For 1.500in S
$64.95
Constructed from hardened steel alloy, COMP's locator cups handle high RPM and extreme spring pressures while holding the spring. Our 4769 features a 1.635" OD with a .640" ID that works with our 901, 26956, 26957, and 26955 springs.CatalogUser 1
COMP Cams Spring Seat Cup For 1.500in Sp
$10.95
Constructed from hardened steel alloy, COMP's locator cup handles high RPM and extreme spring pressures while holding the spring. Our 4769 features a 1.635" OD with a .640" ID that works with our 901, 26956, 26957, and 26955 springs.CatalogUser 1
COMP Cams Degree Cam Bushing Set
$19.95
Color coded for easy identification; Accurately position cams; Precision manufactured; Requires a 13/32? drill set; Fit small and Big Block Chevrolet, Big Block and 426 Hemi ChryslerCatalogUser 1