Suspension Lift Kits

This high quality 6" lift kit for the GMC Sierra and Chevy Silverado 3500HD has been designed to improve the offroad capability of the vehicle while providing a smooth highway ride. The Fabtech lift kit retains the factory load carrying capacity of the vehicle that is perfect for owners that use their truck for towing and hauling. The heart of this lift kit is Fabtechs cutting edge RTS design. The RTS is a bracket system that keeps the torsion bars in the factory location while providing lift. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading. It provides a very clean appearance to the vehicle. Another important aspect of this GM 3500HD lift kit is the lower control arm crossmembers. They are arched at the bottom to provide ground clearance and have a skid plate to protect the front differential against offroad obstacles. The crossmembers and bracketry are built with 1/4" thick steel that provides strength and rigidity to the vehicles suspension. The superior build quality and design of the components allows for a fast installation time with only four holes to drill and no cutting of the front diff housing. This heavy duty GMC Sierra and Chevy Silverado 3500HD lift kit is built with the highest quality components and is designed to provide years of trouble free service while offering a great ride. FEATURES: Torsion bars remain in the factory frame location for maximum ground clearance. RTS Torsion bar brackets index the bars at factory setting for a smooth ride. Heavy duty bracketry constructed of 1/4" thick steel for additional suspension strength. Near factory track width helps keep tires under the fenders. Front & Rear bump stop brackets eliminate over cycling of suspension. CROSSMEMBERS: 1/4" thick steel lower control arm Crossmembers are arched for maximum ground clearance. The welded box design of these Crossmembers provides additional strThis Part Fits: Year Make Model Submodel 2020-2021 Chevrolet Silverado 3500 HD High Country 2020-2021 Chevrolet Silverado 3500 HD LT 2020-2021 Chevrolet Silverado 3500 HD LTZ 2020-2021 Chevrolet Silverado 3500 HD WT 2020-2021 GMC Sierra 3500 HD Base 2020-2021 GMC Sierra 3500 HD Denali 2020-2021 GMC Sierra 3500 HD SLE 2020-2021 GMC Sierra 3500 HD SLT

This high quality 6" lift kit for the GMC Sierra and Chevy Silverado 2500HD has been designed to improve the offroad capability of the vehicle while providing a smooth highway ride. The Fabtech lift kit retains the factory load carrying capacity of the vehicle that is perfect for owners that use their truck for towing and hauling. The heart of this lift kit is Fabtechs cutting edge RTS design. The RTS is a bracket system that keeps the torsion bars in the factory location while providing lift. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading. It provides a very clean appearance to the vehicle. Another important aspect of this GM 2500HD lift kit is the lower control arm crossmembers. They are arched at the bottom to provide ground clearance and have a skid plate to protect the front differential against offroad obstacles. The crossmembers and bracketry are built with 1/4" thick steel that provides strength and rigidity to the vehicles suspension. The superior build quality and design of the components allows for a fast installation time with only four holes to drill and no cutting of the front diff housing. This heavy duty GMC Sierra and Chevy Silverado 2500HD lift kit is built with the highest quality components and is designed to provide years of trouble free service while offering a great ride. FEATURES: Torsion bars remain in the factory frame location for maximum ground clearance. RTS Torsion bar brackets index the bars at factory setting for a smooth ride. Heavy duty bracketry constructed of 1/4" thick steel for additional suspension strength. Near factory track width helps keep tires under the fenders. Front & Rear bump stop brackets eliminate over cycling of suspension. CROSSMEMBERS: 1/4" thick steel lower control arm Crossmembers are arched for maximum ground clearance. The welded box design of these Crossmembers provides additional stThis Part Fits: Year Make Model Submodel 2020-2021 Chevrolet Silverado 2500 HD Custom 2020-2021 Chevrolet Silverado 2500 HD High Country 2020-2021 Chevrolet Silverado 2500 HD LT 2020-2021 Chevrolet Silverado 2500 HD LTZ 2020-2021 Chevrolet Silverado 2500 HD WT 2020-2021 GMC Sierra 2500 HD Base 2020-2021 GMC Sierra 2500 HD Denali 2020-2021 GMC Sierra 2500 HD SLE 2020-2021 GMC Sierra 2500 HD SLT

This high quality 6" lift kit for the GMC Sierra and Chevy Silverado 2500HD has been designed to improve the offroad capability of the vehicle while providing a smooth highway ride. The Fabtech lift kit retains the factory load carrying capacity of the vehicle that is perfect for owners that use their truck for towing and hauling. The heart of this lift kit is Fabtechs cutting edge RTS design. The RTS is a bracket system that keeps the torsion bars in the factory location while providing lift. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading. It provides a very clean appearance to the vehicle. Another important aspect of this GM 2500HD lift kit is the lower control arm crossmembers. They are arched at the bottom to provide ground clearance and have a skid plate to protect the front differential against offroad obstacles. The crossmembers and bracketry are built with 1/4" thick steel that provides strength and rigidity to the vehicles suspension. The superior build quality and design of the components allows for a fast installation time with only four holes to drill and no cutting of the front diff housing. This heavy duty GMC Sierra and Chevy Silverado 2500HD lift kit is built with the highest quality components and is designed to provide years of trouble free service while offering a great ride. FEATURES: Torsion bars remain in the factory frame location for maximum ground clearance. RTS Torsion bar brackets index the bars at factory setting for a smooth ride. Heavy duty bracketry constructed of 1/4" thick steel for additional suspension strength. Near factory track width helps keep tires under the fenders. Front & Rear bump stop brackets eliminate over cycling of suspension. CROSSMEMBERS: 1/4" thick steel lower control arm Crossmembers are arched for maximum ground clearance. The welded box design of these Crossmembers provides additional stThis Part Fits: Year Make Model Submodel 2020-2021 Chevrolet Silverado 2500 HD Custom 2020-2021 Chevrolet Silverado 2500 HD High Country 2020-2021 Chevrolet Silverado 2500 HD LT 2020-2021 Chevrolet Silverado 2500 HD LTZ 2020-2021 Chevrolet Silverado 2500 HD WT 2020-2021 GMC Sierra 2500 HD Base 2020-2021 GMC Sierra 2500 HD Denali 2020-2021 GMC Sierra 2500 HD SLE 2020-2021 GMC Sierra 2500 HD SLT

This high quality 6" lift kit for the GMC Sierra and Chevy Silverado 2500HD has been designed to improve the offroad capability of the vehicle while providing a smooth highway ride. The Fabtech lift kit retains the factory load carrying capacity of the vehicle that is perfect for owners that use their truck for towing and hauling. The heart of this lift kit is Fabtechs cutting edge RTS design. The RTS is a bracket system that keeps the torsion bars in the factory location while providing lift. This feature provides superior ground clearance at the frame as there are no torsion bars hanging down to become high centered on or damaged when offroading. It provides a very clean appearance to the vehicle. Another important aspect of this GM 2500HD lift kit is the lower control arm crossmembers. They are arched at the bottom to provide ground clearance and have a skid plate to protect the front differential against offroad obstacles. The crossmembers and bracketry are built with 1/4" thick steel that provides strength and rigidity to the vehicles suspension. The superior build quality and design of the components allows for a fast installation time with only four holes to drill and no cutting of the front diff housing. This heavy duty GMC Sierra and Chevy Silverado 2500HD lift kit is built with the highest quality components and is designed to provide years of trouble free service while offering a great ride. FEATURES: Torsion bars remain in the factory frame location for maximum ground clearance. RTS Torsion bar brackets index the bars at factory setting for a smooth ride. Heavy duty bracketry constructed of 1/4" thick steel for additional suspension strength. Near factory track width helps keep tires under the fenders. Front & Rear bump stop brackets eliminate over cycling of suspension. CROSSMEMBERS: 1/4" thick steel lower control arm Crossmembers are arched for maximum ground clearance. The welded box design of these Crossmembers provides additional stThis Part Fits: Year Make Model Submodel 2020-2021 Chevrolet Silverado 2500 HD Custom 2020-2021 Chevrolet Silverado 2500 HD High Country 2020-2021 Chevrolet Silverado 2500 HD LT 2020-2021 Chevrolet Silverado 2500 HD LTZ 2020-2021 Chevrolet Silverado 2500 HD WT 2020-2021 GMC Sierra 2500 HD Base 2020-2021 GMC Sierra 2500 HD Denali 2020-2021 GMC Sierra 2500 HD SLE 2020-2021 GMC Sierra 2500 HD SLT

This high quality GM 2500HD lift kit offers an increased ride height for enthusiasts looking to run a 35in tall tire with enhanced offroad capabilities. The stance of the vehicle will become more level front to rear for an aggressive look. The factory GM upper control arms are replaced with Fabtech's heavy duty ball joint tubular arms. They are constructed with 1.50in OD DOM steel tubing and feature a high travel ball joint that is sizably larger than stock. This provides for increased strength both on and offroad. Fabtech sets the ball joint angle to allow for full travel without bind throughout the travel range. Fabtech's forged torsion bar keys replace the factory units and allow for additional ride height adjustment to work in conjunction with the new upper control arms. Fabtech offers their top of the line Dirt Logic 2.25 shocks with this quality 2500HD lift kit. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. The front shocks comes with remote aluminum reservoirs to help cool the shock oil for more consistent damping in rugged terrain. These high quality Dirt Logic shocks will provide a superior ride quality both on and offroad with excellent damping for offroad use. This 3.5in HD lift kit comes with high quality components that add strength and reliability to the vehicle while giving it a commanding presence. Tubular Steel Upper Control Arms. Additional 1 degree of caster built in. 1.5in OD x .120in wall DOM tubing. High travel oversized ball joint. 2.25in OD x .250in wall DOM bushing barrels. Heavy duty forged torsion bar keys.This Part Fits: Year Make Model Submodel 2020-2021 Chevrolet Silverado 2500 HD High Country 2020-2021 Chevrolet Silverado 2500 HD LT 2020-2021 Chevrolet Silverado 2500 HD LTZ 2020-2021 Chevrolet Silverado 3500 HD High Country 2020-2021 Chevrolet Silverado 3500 HD LT 2020-2021 Chevrolet Silverado 3500 HD LTZ 2020-2021 Chevrolet Silverado 3500 HD WT 2020-2021 GMC Sierra 2500 HD Base 2020-2021 GMC Sierra 2500 HD Denali 2020-2021 GMC Sierra 2500 HD SLE 2020-2021 GMC Sierra 2500 HD SLT 2020-2021 GMC Sierra 3500 HD Base 2020-2021 GMC Sierra 3500 HD Denali 2020-2021 GMC Sierra 3500 HD SLE 2020-2021 GMC Sierra 3500 HD SLT

This high quality GM 2500HD lift kit offers an increased ride height for enthusiasts looking to run a 35in tall tire with enhanced offroad capabilities. The stance of the vehicle will become more level front to rear for an aggressive look. The factory GM upper control arms are replaced with Fabtech's heavy duty ball joint tubular arms. They are constructed with 1.50in OD DOM steel tubing and feature a high travel ball joint that is sizably larger than stock. This provides for increased strength both on and offroad. Fabtech sets the ball joint angle to allow for full travel without bind throughout the travel range. Fabtech's forged torsion bar keys replace the factory units and allow for additional ride height adjustment to work in conjunction with the new upper control arms. Fabtech offers their top of the line Dirt Logic 2.25 shocks with this 2500HD lift kit. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. These high quality Dirt Logic shocks will provide a superior ride quality both on and offroad with excellent damping for offroad use. This 3.5in HD lift kit comes with high quality components that add strength and reliability to the vehicle while giving it a commanding presence. Tubular Steel Upper Control Arms. Additional 1 degree of caster built in. 1.5in OD x .120in wall DOM tubing. High travel oversized ball joint. 2.25in OD x .250in wall DOM bushing barrels. Heavy duty forged torsion bar keys.This Part Fits: Year Make Model Submodel 2020-2021 Chevrolet Silverado 2500 HD High Country 2020-2021 Chevrolet Silverado 2500 HD LT 2020-2021 Chevrolet Silverado 2500 HD LTZ 2020-2021 Chevrolet Silverado 3500 HD High Country 2020-2021 Chevrolet Silverado 3500 HD LT 2020-2021 Chevrolet Silverado 3500 HD LTZ 2020-2021 Chevrolet Silverado 3500 HD WT 2020-2021 GMC Sierra 2500 HD Base 2020-2021 GMC Sierra 2500 HD Denali 2020-2021 GMC Sierra 2500 HD SLE 2020-2021 GMC Sierra 2500 HD SLT 2020-2021 GMC Sierra 3500 HD Base 2020-2021 GMC Sierra 3500 HD Denali 2020-2021 GMC Sierra 3500 HD SLE 2020-2021 GMC Sierra 3500 HD SLT

This high quality GM 2500HD lift kit offers an increased ride height for enthusiasts looking to run a 35in tall tire with enhanced offroad capabilities. The stance of the vehicle will become more level front to rear for an aggressive look. The factory GM upper control arms are replaced with Fabtech's heavy duty ball joint tubular arms. They are constructed with 1.50in OD DOM steel tubing and feature a high travel ball joint that is sizably larger than stock. This provides for increased strength both on and offroad. Fabtech sets the ball joint angle to allow for full travel without bind throughout the travel range. Fabtech's forged torsion bar keys replace the factory units and allow for additional ride height adjustment to work in conjunction with the new upper control arms. Fabtech offers their Performance shocks with this suspension. They are a twin tube shock that will provide a good highway ride with the ability to tackle offroad. This 3.5in HD lift kit comes with high quality components that add strength and reliability to the vehicle while giving it a commanding presence. Tubular Steel Upper Control Arms. Additional 1 degree of caster built in. 1.5in OD x .120in wall DOM tubing. High travel oversized ball joint. 2.25in OD x .250in wall DOM bushing barrels. Heavy duty forged torsion bar keys.This Part Fits: Year Make Model Submodel 2020-2021 Chevrolet Silverado 2500 HD High Country 2020-2021 Chevrolet Silverado 2500 HD LT 2020-2021 Chevrolet Silverado 2500 HD LTZ 2020-2021 GMC Sierra 2500 HD Base 2020-2021 GMC Sierra 2500 HD Denali 2020-2021 GMC Sierra 2500 HD SLE 2020-2021 GMC Sierra 2500 HD SLT 2020-2021 GMC Sierra 3500 HD Base 2020-2021 GMC Sierra 3500 HD Denali 2020-2021 GMC Sierra 3500 HD SLE 2020-2021 GMC Sierra 3500 HD SLT

This high quality GM 2500HD lift kit offers an increased ride height for enthusiasts looking to run a 35in tall tire with enhanced offroad capabilities. The stance of the vehicle will become more level front to rear for an aggressive look. The factory GM upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock UCA's. They are constructed of the finest material with .120in wall 1.50in OD 4130 Chromoly tubing. High quality 1in FK Stainless PTFE lined Uniball bearings are utilized in place of ball joints. These super stout Control Arms are designed for increased longevity in rugged offroad conditions while providing a more positive on road feel. Fabtech's forged torsion bar keys replace the factory units and allow for additional ride height adjustment to work in conjunction with the new upper control arms. Fabtech offers their top of the line Dirt Logic 2.25 shocks with this quality 2500HD lift kit. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. The front shocks comes with remote aluminum reservoirs to help cool the shock oil for more consistent damping in rugged terrain. These high quality Dirt Logic shocks will provide a superior ride quality both on and offroad with excellent damping for offroad use. This 3.5in HD lift kit comes with high quality components that add strength and reliability to the vehicle while giving it a commanding presence. Fabtech UCA's eliminate factory upper ball joint with super strong 1in ID Stainless Steel American Uniball for increased suspension strength. Additional caster is built into Arms for enhanced align ability with oversized tires. 1.50in OD .120in wall 4130 Chromoly tubing reduces flex found in stock arms for more positive road feel. 17-4 Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return toThis Part Fits: Year Make Model Submodel 2020-2021 Chevrolet Silverado 2500 HD High Country 2020-2021 Chevrolet Silverado 2500 HD LT 2020-2021 Chevrolet Silverado 2500 HD LTZ 2020-2021 Chevrolet Silverado 3500 HD High Country 2020-2021 Chevrolet Silverado 3500 HD LT 2020-2021 Chevrolet Silverado 3500 HD LTZ 2020-2021 Chevrolet Silverado 3500 HD WT 2021 GMC Sierra 2500 HD Base 2020-2021 GMC Sierra 2500 HD Denali 2020-2021 GMC Sierra 2500 HD SLE 2020-2021 GMC Sierra 2500 HD SLT 2020-2021 GMC Sierra 3500 HD Base 2020-2021 GMC Sierra 3500 HD Denali 2020-2021 GMC Sierra 3500 HD SLE 2020-2021 GMC Sierra 3500 HD SLT

This high quality GM 2500HD lift kit offers an increased ride height for enthusiasts looking to run a 35in tall tire with enhanced offroad capabilities. The stance of the vehicle will become more level front to rear for an aggressive look. The factory GM upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock UCA's. They are constructed of the finest material with .120in wall 1.50in OD 4130 Chromoly tubing. High quality 1in FK Stainless PTFE lined Uniball bearings are utilized in place of ball joints. These super stout Control Arms are designed for increased longevity in rugged offroad conditions while providing a more positive on road feel. Fabtech's forged torsion bar keys replace the factory units and allow for additional ride height adjustment to work in conjunction with the new upper control arms. Fabtech offers their Stealth shocks with this suspension. They are a sealed monotube shock that has a Nitrocarb piston rod for corrosion resistance and resist rock chipping. They will provide a great highway ride with good offroad damping capacity. This 3.5in HD lift kit comes with high quality components that add strength and reliability to the vehicle while giving it a commanding presence. Fabtech UCA's eliminate factory upper ball joint with super strong 1in ID Stainless Steel American Uniball for increased suspension strength. Additional caster is built into Arms for enhanced align ability with oversized tires. 1.50in OD .120in wall 4130 Chromoly tubing reduces flex found in stock arms for more positive road feel. 17-4 Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature. 17-4 Stainless steel misalignments for proper clearance of large Uniballs throughout the travel range. Billet Uniball cap keeps dirt and debris out. .250 wall DOM bushing barrels with welded gussets for strength. HeavyThis Part Fits: Year Make Model Submodel 2020-2021 Chevrolet Silverado 2500 HD High Country 2020-2021 Chevrolet Silverado 2500 HD LT 2020-2021 Chevrolet Silverado 2500 HD LTZ 2020-2021 Chevrolet Silverado 3500 HD High Country 2020-2021 Chevrolet Silverado 3500 HD LT 2020-2021 Chevrolet Silverado 3500 HD LTZ 2020-2021 Chevrolet Silverado 3500 HD WT 2021 GMC Sierra 2500 HD Base 2020-2021 GMC Sierra 2500 HD Denali 2020-2021 GMC Sierra 2500 HD SLE 2020-2021 GMC Sierra 2500 HD SLT 2020-2021 GMC Sierra 3500 HD Base 2020-2021 GMC Sierra 3500 HD Denali 2020-2021 GMC Sierra 3500 HD SLE 2020-2021 GMC Sierra 3500 HD SLT

This high quality GM 2500HD lift kit offers an increased ride height for enthusiasts looking to run a 35in tall tire with enhanced offroad capabilities. The stance of the vehicle will become more level front to rear for an aggressive look. The factory GM upper control arms are replaced with Fabtech's Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock UCA's. They are constructed of the finest material with .120in wall 1.50in OD 4130 Chromoly tubing. High quality 1in FK Stainless PTFE lined Uniball bearings are utilized in place of ball joints. These super stout Control Arms are designed for increased longevity in rugged offroad conditions while providing a more positive on road feel. Fabtech's forged torsion bar keys replace the factory units and allow for additional ride height adjustment to work in conjunction with the new upper control arms. Fabtech offers their top of the line Dirt Logic 2.25 shocks with this 2500HD lift kit. They are constructed with a stainless steel body and a NitroSteel piston rod for maximum corrosion resistance and durability. These high quality Dirt Logic shocks will provide a superior ride quality both on and offroad with excellent damping for offroad use. This 3.5in HD lift kit comes with high quality components that add strength and reliability to the vehicle while giving it a commanding presence. Fabtech UCA's eliminate factory upper ball joint with super strong 1in ID Stainless Steel American Uniball for increased suspension strength. Additional caster is built into Arms for enhanced align ability with oversized tires. 1.50in OD .120in wall 4130 Chromoly tubing reduces flex found in stock arms for more positive road feel. 17-4 Heat treated Uniball pin fits into factory ball joint taper without modification to the spindle for easy return to stock feature. 17-4 Stainless steel misalignments for proper clearance of large Uniballs throughout the travel range. Billet Uniball capThis Part Fits: Year Make Model Submodel 2020-2021 Chevrolet Silverado 2500 HD High Country 2020-2021 Chevrolet Silverado 2500 HD LT 2020-2021 Chevrolet Silverado 2500 HD LTZ 2020-2021 Chevrolet Silverado 3500 HD High Country 2020-2021 Chevrolet Silverado 3500 HD LT 2020-2021 Chevrolet Silverado 3500 HD LTZ 2020-2021 Chevrolet Silverado 3500 HD WT 2021 GMC Sierra 2500 HD Base 2020-2021 GMC Sierra 2500 HD Denali 2020-2021 GMC Sierra 2500 HD SLE 2020-2021 GMC Sierra 2500 HD SLT 2020-2021 GMC Sierra 3500 HD Base 2020-2021 GMC Sierra 3500 HD Denali 2020-2021 GMC Sierra 3500 HD SLE 2020-2021 GMC Sierra 3500 HD SLT

Designed specifically for Trail Boss and AT4 owners that want a little more ride height out of their truck for clearance of full size 33/1250R 18 inch or 20 inch tires, this lift kit is the ticket. Fabtech's Upper Control Arm lift kit provides a 1.5" increased ride height on Trail Boss and AT4 models without creating suspension bind at full droop. These vehicles have a factory 2" lift. With the addition of this 1.5" lift kit, the vehicle will sit as high as a standard model with a 3.5" lift kit and clear a 33" tall tire. Lift is accomplished with an aluminum spacer at the top and a small preload spacer under the coil of the factory Coilover shock. This positions the Coilover properly to provide height without coil bind or over extending the travel that can lead to damaged suspension parts in the future. The tubular Upper Control Arms with heavy duty ball joints address the geometry of the front suspension with the new ride height for proper alignablity. Due to the new GM suspension geometry of the 2019, there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1" blocks and u bolts. Some owners may opt to not install the rear blocks if they desire to level the stance of the vehicle. The Stealth rear shocks are a monotube design that have a Nitrocarb piston rod for corrosion resistance and resist rock chipping. They?ll provide a great highway ride with good offroad damping capacity. FEATURES: Increased ground clearance, Extended range upper ball joints provide a smooth quiet ride, Increased fender clearance for 33? tall tires, Suspension can be restored to stock, Easy installation.

Designed specifically for Trail Boss and AT4 owners that want a little more ride height out of their truck for clearance of full size 33/1250R 18 inch or 20 inch tires, this lift kit is the ticket. Fabtech's Upper Control Arm lift kit provides a 1.5" increased ride height on Trail Boss and AT4 models without creating suspension bind at full droop. These vehicles have a factory 2" lift. With the addition of this 1.5" lift kit, the vehicle will sit as high as a standard model with a 3.5" lift kit and clear a 33" tall tire. Lift is accomplished with an aluminum spacer at the top and a small preload spacer under the coil of the factory Coilover shock. This positions the Coilover properly to provide height without coil bind or over extending the travel that can lead to damaged suspension parts in the future. The tubular Upper Control Arms with heavy duty ball joints address the geometry of the front suspension with the new ride height for proper alignablity. Due to the new GM suspension geometry of the 2019, there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1" blocks and u bolts. Some owners may opt to not install the rear blocks if they desire to level the stance of the vehicle. The Performance rear shocks are a twin tube design provide a good highway ride with the ability to handle offroad use. FEATURES: Increased ground clearance, Extended range upper ball joints provide a smooth quiet ride, Increased fender clearance for 33? tall tires, Suspension can be restored to stock, Easy installation.

Fabtech?s Basic lift kit features our world renowned IFS suspension design for the Chevy/GMC 1500 2WD providing excellent drive ability both on and offroad. There is zero bump steer throughout the suspension cycle that helps reduce drive fatigue while improving the overall drive ability of the vehicle. The near stock track width keeps the tires under the fenders for a clean appearance. Fabtech?s proprietary steering knuckle geometry provides excellent lock to lock turning radius to maneuver in tight spots. Heavy duty 1/4? thick steel crossmembers feature OE style alignment cam pins that utilize the factory cams for easy adjustment. The factory coilover shocks are relocated from the bottom to allow for full steer while achieving 6? of lift. Rear lift is accomplished with a 5? Block and u-bolt system. Fabtech has addressed all aspects of the suspension for proper wheel travel and lock to lock steering without over cycling. Comes with a free 5 year 60,000 mile Powertrain Warranty. FEATURES: 1/4? thick steel lower control arm Crossmembers are arched for maximum ground clearance. The welded box design of these Crossmembers provides additional strength to the front suspension. Retains factory alignment cams for easy adjustment. Fabtech?s extended length ductile iron Steering Knuckles provide zero bump steer throughout the suspension travel. This provides an enhanced driver experience compared to stock. Near stock track width keeps the tires under the fenders for a clean appearance. Oversized tie rods are provided to replace the stock units that are designed to handle oversized tires. The factory Coilovers are relocated with heavy duty lower mounts to lift the vehicle while retaining the stock ride quality. 1/4? thick steel drop brackets reposition the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range. Billet spacers relocate the factory closed cell bump stops to cThis Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 SSV 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

Fabtech?s Basic lift kit features our world renowned IFS suspension design for the Chevy/GMC 1500 2WD providing excellent drive ability both on and offroad. There is zero bump steer throughout the suspension cycle that helps reduce drive fatigue while improving the overall drive ability of the vehicle. The near stock track width keeps the tires under the fenders for a clean appearance. Fabtech?s proprietary steering knuckle geometry provides excellent lock to lock turning radius to maneuver in tight spots. Heavy duty 1/4? thick steel crossmembers feature OE style alignment cam pins that utilize the factory cams for easy adjustment. The factory coilover shocks are relocated from the bottom to allow for full steer while achieving 6? of lift. Rear lift is accomplished with a 5? Block and u-bolt system. Fabtech has addressed all aspects of the suspension for proper wheel travel and lock to lock steering without over cycling. Comes with a free 5 year 60,000 mile Powertrain Warranty. FEATURES: 1/4? thick steel lower control arm Crossmembers are arched for maximum ground clearance. The welded box design of these Crossmembers provides additional strength to the front suspension. Retains factory alignment cams for easy adjustment. Fabtech?s extended length ductile iron Steering Knuckles provide zero bump steer throughout the suspension travel. This provides an enhanced driver experience compared to stock. Near stock track width keeps the tires under the fenders for a clean appearance. Oversized tie rods are provided to replace the stock units that are designed to handle oversized tires. The factory Coilovers are relocated with heavy duty lower mounts to lift the vehicle while retaining the stock ride quality. 1/4? thick steel drop brackets reposition the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range. Billet spacers relocate the factory closed cell bump stops to cThis Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 SSV 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

Exclusive to the GMC Denali is GM's Adaptive Ride Control (ARC) shock absorbers. These shocks are electronically controlled and adjust to various road conditions within milliseconds giving an exceptional ride quality both on and offroad. Fabtech retains these quality ARC shocks in their 6" Basic System for the GMC Sierra 1500 Denali with heavy duty relocation brackets. In designing this system, Fabtech engineers focused on building a system that has zero bump steer throughout the suspension cycle. This is key in reducing driver fatigue while improving the overall drive ability of the vehicle. The near stock track width was accomplished to keep oversized tires under the fenders for a clean appearance. Fabtech's proprietary steering knuckle geometry provides excellent lock to lock turning radius to help you maneuver in tight spots. Heavy duty 1/4" thick steel crossmembers feature OE style alignment cam pins that utilize the factory cams for quick easy adjustment. Triple front diff mounts reposition the differential for vibration free operation at high speed. Rear lift is accomplished by removing the factory 2" block and replacing it with a 5" Block and u-bolt system. Fabtech has addressed all aspects of this Denali suspension for proper ARC shock compatibility with the new 6" lift height. This quality system comes with a free 5 year 60,000 mile Powertrain Warranty.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 SSV 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

The Chevrolet Trail Boss and GMC AT4 both have a factory 2" lift compared to other GM 1500 trucks of the same year model. Fabtech's suspension system for these two trucks provide a 4" lift height on top of the factory 2" lift for clearance of 35" tall tires. Once a Trail Boss or AT4 is lifted with a Fabtech 4" system, the truck will sit the same height as a 1500 with a 6" suspension and 35" tires. Fabtech's suspension design for the Trail Boss and AT4 provides excellent drive ability both on and offroad. There is zero bump steer throughout the suspension cycle that helps reduce drive fatigue while improving the overall drive ability of the vehicle. The near stock track width keeps the tires under the fenders for a clean appearance. Fabtech's proprietary steering knuckle geometry provides excellent lock to lock turning radius to maneuver in tight spots. Heavy duty 1/4" thick steel crossmembers feature OE style alignment cam pins that utilize the factory cams for easy adjustment. Triple front diff mounts reposition the differential for vibration free operation at high speed. The factory Trail Boss and AT4 coilover shocks are retained and relocated from the bottom to allow for full steer while achieving 4" of lift. Rear lift is accomplished by removing the factory 2" block and replacing it with a 5" block and u-bolt system. Fabtech has addressed all aspects of the Trail Boss suspension for proper wheel travel and lock to lock steering without over cycling. Comes with a free 5 year 60,000 mile Powertrain Warranty.

The Chevrolet Trail Boss and GMC AT4 both have a factory 2" lift compared to other GM 1500 trucks of the same year model. Fabtech's suspension system for these two trucks provide a 4" lift height on top of the factory 2" lift for clearance of 35" tall tires. Once a Trail Boss or AT4 is lifted with a Fabtech 4" system, the truck will sit the same height as a 1500 with a 6" suspension and 35" tires. Fabtech's suspension design for the Trail Boss and AT4 provides excellent drive ability both on and offroad. There is zero bump steer throughout the suspension cycle that helps reduce drive fatigue while improving the overall drive ability of the vehicle. The near stock track width keeps the tires under the fenders for a clean appearance. Fabtech's proprietary steering knuckle geometry provides excellent lock to lock turning radius to maneuver in tight spots. Heavy duty 1/4" thick steel crossmembers feature OE style alignment cam pins that utilize the factory cams for easy adjustment. Triple front diff mounts reposition the differential for vibration free operation at high speed. The factory Trail Boss and AT4 coilover shocks are retained and relocated from the bottom to allow for full steer while achieving 4" of lift. Rear lift is accomplished by removing the factory 2" block and replacing it with a 5" block and u-bolt system. Fabtech has addressed all aspects of the Trail Boss suspension for proper wheel travel and lock to lock steering without over cycling. Comes with a free 5 year 60,000 mile Powertrain Warranty.

Fabtech?s world renowned IFS suspension design for the GM 1500 provides excellent drive ability both on and offroad. There is zero bump steer throughout the suspension cycle that helps reduce drive fatigue while improving the overall drive ability of the vehicle. The near stock track width keeps the tires under the fenders for a clean appearance. Fabtech ?s proprietary steering knuckle geometry provides excellent lock to lock turning radius to maneuver in tight spots. Heavy duty 1/4" thick steel crossmembers feature OE style alignment cam pins that utilize the factory cams for easy adjustment. Triple front diff mounts reposition the differential for vibration free operation at high speed. The factory coilover shocks are relocated from the bottom to allow for full steer while achieving 6? of lift. Rear lift is accomplished with a 5" Block and u-bolt system. Includes rear Stealth Shocks. Fabtech has addressed all aspects of the suspension for proper wheel travel and lock to lock steering without over cycling. Comes with a free 5 year 60,000 mile Powertrain Warranty.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 SSV 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

Fabtech?s world renowned IFS suspension design for the GM 1500 provides excellent drive ability both on and offroad. There is zero bump steer throughout the suspension cycle that helps reduce drive fatigue while improving the overall drive ability of the vehicle. The near stock track width keeps the tires under the fenders for a clean appearance. Fabtech ?s proprietary steering knuckle geometry provides excellent lock to lock turning radius to maneuver in tight spots. Heavy duty 1/4" thick steel crossmembers feature OE style alignment cam pins that utilize the factory cams for easy adjustment. Triple front diff mounts reposition the differential for vibration free operation at high speed. The factory coilover shocks are relocated from the bottom to allow for full steer while achieving 6? of lift. Rear lift is accomplished with a 5" Block and u-bolt system. Includes rear Performance Shocks. Fabtech has addressed all aspects of the suspension for proper wheel travel and lock to lock steering without over cycling. Comes with a free 5 year 60,000 mile Powertrain Warranty.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 SSV 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

This Uniball Upper Control Arm system for the Sierra Denali provides a 3.5" increased ride height over stock without creating suspension bind at full droop. The 3.5" lift is accomplished with steel spacers that utilize the factory coilover shocks for a smooth ride. Uniball Upper Control Arms (UCA). The heavy duty Uniball Upper Control Arms are constructed of the finest material with .120" wall 1.50" OD 4130 Chromoly tubing. High quality 1" FK Stainless PTFE lined Uniball bearings are used in place of ball joints. These super stout Control Arms are designed for increased longevity in rugged offroad conditions while providing a more positive on road feel. Rear Lift. The rear lift for this system comes from 1.5" blocks and u-bolts and uses the factory Adaptive Ride Control shocks. Features Increased ground clearance. Uniball Upper Control Arms. Increased fender clearance compared to a Leveling Kit for 33" tall tires. Suspension can be restored to stock. Easy installation.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 SSV 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

This Uniball Upper Control Arm system for the Sierra and Silverado provides a 3.5" increased ride height over stock without creating suspension bind at full droop. The 3.5" lift is accomplished with steel spacers that utilize the factory coilover shocks for a smooth ride. Uniball Upper Control Arms (UCA). The heavy duty Uniball Upper Control Arms are constructed of the finest material with .120" wall 1.50" OD 4130 Chromoly tubing. High quality 1" FK Stainless PTFE lined Uniball bearings are used in place of ball joints. These super stout Control Arms are designed for increased longevity in rugged offroad conditions while providing a more positive on road feel. Rear Lift. The rear lift for this system comes from 1.5" blocks and u-bolts paired with our Stealth shocks. Features Increased ground clearance. Uniball Upper Control Arms. Increased fender clearance compared to a Leveling Kit for 33" tall tires. Suspension can be restored to stock. Easy installation.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 SSV 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

This Uniball Upper Control Arm system for the Sierra and Silverado provides a 3.5" increased ride height over stock without creating suspension bind at full droop. The 3.5" lift is accomplished with steel spacers that utilize the factory coilover shocks for a smooth ride. The heavy duty Uniball Upper Control Arms are constructed of the finest material with .120" wall 1.50" OD 4130 Chromoly tubing. High quality 1" FK Stainless PTFE lined Uniball bearings are used in place of ball joints. These super stout Control Arms are designed for increased longevity in rugged offroad conditions while providing a more positive on road feel. The rear lift for this system comes from 1.5" blocks and u-bolts paired with our Performance shocks. Features Increased ground clearance, Uniball Upper Control Arms, Increased fender clearance compared to a Leveling Kit for 33" tall tires. Suspension can be restored to stock.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 SSV 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

Fabtech?s Upper Control Arm system provides a 3.5" increased ride height over stock without creating suspension bind at full droop. Lift is accomplished with steel spacers that utilizes the factory Adaptive Ride Control coilovers. The replacement Upper Control Arms address the geometry of the front suspension with the new ride height for proper alignablity. Heavy duty ball joints allow for extended travel to eliminate binding. Rear lift comes from 1.5" blocks and u-bolts. Heavy duty rear shock extension brackets retain the factory Adaptive Ride Control shocks for an outstanding ride quality. Features value priced system with Fabtech quality, increased ground clearance, extended range upper ball joints provide a smooth quiet ride, increased fender clearance compared to a Leveling Kit for 33? tall tires, suspension can be restored to stock, easy installation.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

This quality Upper Control Arm system provides a 3.5? increased ride height over stock without creating suspension bind at full droop. Lift is accomplished with spacers that utilizes the factory coilover shocks for a stock ride. The Fabtech Upper Control Arms address the geometry of the front suspension with the new ride height for proper align-ability. Heavy duty ball joints allow for extended travel to eliminate binding. Due to the GM suspension geometry there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1? blocks and u-bolts. Value priced system with Fabtech quality. Increased ground clearance. Extended range upper ball joints provide a smooth quiet ride. Increased fender clearance compared to a Leveling Kit for 33? tall tires. Suspension can be restored to stock. Easy installation. Includes rear Stealth Shocks.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

This quality Upper Control Arm system provides a 3.5? increased ride height over stock without creating suspension bind at full droop. Lift is accomplished with spacers that utilizes the factory coilover shocks for a stock ride. The Fabtech Upper Control Arms address the geometry of the front suspension with the new ride height for proper align-ability. Heavy duty ball joints allow for extended travel to eliminate binding. Due to the GM suspension geometry there are no differential drop brackets required for the CV axles to operate properly. Rear lift comes from 1? blocks and u-bolts. Value priced system with Fabtech quality. Increased ground clearance. Extended range upper ball joints provide a smooth quiet ride. Increased fender clearance compared to a Leveling Kit for 33? tall tires. Suspension can be restored to stock. Easy installation. Includes rear Performance Shocks.This Part Fits: Year Make Model Submodel 2019-2020 Chevrolet Silverado 1500 Custom 2019-2020 Chevrolet Silverado 1500 High Country 2019-2020 Chevrolet Silverado 1500 LT 2019-2020 Chevrolet Silverado 1500 LTZ 2019-2020 Chevrolet Silverado 1500 WT 2019-2020 GMC Sierra 1500 Base 2019-2020 GMC Sierra 1500 Denali 2019-2020 GMC Sierra 1500 SLE 2019-2020 GMC Sierra 1500 SLT

This high quality 6" system retains the factory track width keeping the tires under the fenders for a clean appearance. It has been designed to clear 33" tall tires while providing a factory like ride quality. Heavy duty 1/4" thick steel lower control arm Crossmembers provide superior ground clearance while the integrated front differential Skid Plate adds protection to the drivetrain. The front differential is relocated in a manner to reduce driveline vibration when in 4 wheel drive mode at highway speeds. The system utilizes a simplistic upper Coilover spacer that does not require the disassembly of the shock for a quick installation. The factory rear shocks are retained with extended length mounts. Fabtech?s rear Coil Springs provide increased ride height with a comfortable highway ride. New upper and lower rear Link Arms re-positions the differential to the precise pinion angle to eliminate driveline vibration at all speeds. Rear extended length Sway Bar Links and heavy duty Track Bar Bracket retains the proper roll center of the vehicle for both on and offroad use. This system passes FMVSS 126 standards for stability control functionality as tested by an independent lab. All systems come with a Free 5 year 60,000 mile Powertrain Warranty.This Part Fits: Year Make Model Submodel 2017-2018 Cadillac Escalade Base 2017-2018 Cadillac Escalade Luxury 2017-2018 Cadillac Escalade Platinum 2017-2018 Cadillac Escalade Premium Luxury 2017-2018 Cadillac Escalade ESV Base 2017-2018 Cadillac Escalade ESV Luxury 2017-2018 Cadillac Escalade ESV Platinum 2017-2018 Cadillac Escalade ESV Premium Luxury 2017-2020 Chevrolet Suburban LS 2017-2020 Chevrolet Suburban LT 2017-2020 Chevrolet Suburban Premier 2017-2020 Chevrolet Tahoe LS 2017-2020 Chevrolet Tahoe LT 2017-2020 Chevrolet Tahoe PPV 2017-2020 Chevrolet Tahoe Premier 2017-2020 Chevrolet Tahoe SSV 2017-2020 GMC Yukon Denali 2017-2020 GMC Yukon SLE 2017-2020 GMC Yukon SLT 2017-2020 GMC Yukon XL Denali 2017-2020 GMC Yukon XL SLE 2017-2020 GMC Yukon XL SLT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2018 Chevrolet Silverado 2500 HD High Country 2018 Chevrolet Silverado 2500 HD LT 2018 Chevrolet Silverado 2500 HD LTZ 2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2018 GMC Sierra 2500 HD Base 2018 GMC Sierra 2500 HD Denali 2018 GMC Sierra 2500 HD SLE 2018 GMC Sierra 2500 HD SLT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2018 Chevrolet Silverado 2500 HD High Country 2018 Chevrolet Silverado 2500 HD LT 2018 Chevrolet Silverado 2500 HD LTZ 2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2018 GMC Sierra 2500 HD Base 2018 GMC Sierra 2500 HD Denali 2018 GMC Sierra 2500 HD SLE 2018 GMC Sierra 2500 HD SLT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2018 Chevrolet Silverado 2500 HD High Country 2018 Chevrolet Silverado 2500 HD LT 2018 Chevrolet Silverado 2500 HD LTZ 2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2018 GMC Sierra 2500 HD Base 2018 GMC Sierra 2500 HD Denali 2018 GMC Sierra 2500 HD SLE 2018 GMC Sierra 2500 HD SLT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2018 Chevrolet Silverado 2500 HD High Country 2018 Chevrolet Silverado 2500 HD LT 2018 Chevrolet Silverado 2500 HD LTZ 2018 Chevrolet Silverado 2500 HD WT 2015-2019 Chevrolet Silverado 3500 HD High Country 2011-2019 Chevrolet Silverado 3500 HD LT 2011-2019 Chevrolet Silverado 3500 HD LTZ 2011-2019 Chevrolet Silverado 3500 HD WT 2018 GMC Sierra 2500 HD Base 2018 GMC Sierra 2500 HD Denali 2018 GMC Sierra 2500 HD SLE 2018 GMC Sierra 2500 HD SLT 2015-2018 GMC Sierra 3500 HD Base 2011-2018 GMC Sierra 3500 HD Denali 2011-2018 GMC Sierra 3500 HD SLE 2011-2018 GMC Sierra 3500 HD SLT 2011-2014 GMC Sierra 3500 HD WT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2018 Chevrolet Silverado 3500 HD High Country 2018 Chevrolet Silverado 3500 HD LT 2018 Chevrolet Silverado 3500 HD LTZ 2018 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2018-2019 GMC Sierra 3500 HD Base 2018 GMC Sierra 3500 HD Denali 2018 GMC Sierra 3500 HD SLE 2018 GMC Sierra 3500 HD SLT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2018 Chevrolet Silverado 3500 HD High Country 2018 Chevrolet Silverado 3500 HD LT 2018 Chevrolet Silverado 3500 HD LTZ 2018 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2018-2019 GMC Sierra 3500 HD Base 2018 GMC Sierra 3500 HD Denali 2018 GMC Sierra 3500 HD SLE 2018 GMC Sierra 3500 HD SLT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2018 Chevrolet Silverado 3500 HD High Country 2018 Chevrolet Silverado 3500 HD LT 2018 Chevrolet Silverado 3500 HD LTZ 2018 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2018-2019 GMC Sierra 3500 HD Base 2018 GMC Sierra 3500 HD Denali 2018 GMC Sierra 3500 HD SLE 2018 GMC Sierra 3500 HD SLT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features for a robust suspension upgrade. The 4" system features high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the near stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u bolt configuration.This Part Fits: Year Make Model Submodel 2015-2018 Chevrolet Silverado 2500 HD High Country 2011-2018 Chevrolet Silverado 2500 HD LT 2011-2018 Chevrolet Silverado 2500 HD LTZ 2011-2018 Chevrolet Silverado 2500 HD WT 2018 Chevrolet Silverado 3500 HD High Country 2018 Chevrolet Silverado 3500 HD LT 2018 Chevrolet Silverado 3500 HD LTZ 2018 Chevrolet Silverado 3500 HD WT 2015-2019 GMC Sierra 2500 HD Base 2011-2019 GMC Sierra 2500 HD Denali 2011-2019 GMC Sierra 2500 HD SLE 2011-2019 GMC Sierra 2500 HD SLT 2011-2014 GMC Sierra 2500 HD WT 2018-2019 GMC Sierra 3500 HD Base 2018 GMC Sierra 3500 HD Denali 2018 GMC Sierra 3500 HD SLE 2018 GMC Sierra 3500 HD SLT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features found in their 6" systems but with less lift for use with 33" tall tires. These 4" systems feature high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u-bolt configuration. The Basic System includes front coilover spacers that utilize the factory Coilover shocks. Rear shock options include Performance or Stealth monotube shocks.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT

Fabtech's new 4" crossmember systems utilize their proven heavy duty construction and design features found in their 6" systems but with less lift for use with 33" tall tires. These 4" systems feature high arched lower control arm crossmembers constructed of 1/4" thick steel for maximum strength. The Fabtech ductile iron steering knuckles retain the stock track width keeping tires under the fender for a clean appearance. Rear lift is accomplished with a block and u-bolt configuration. The Basic System includes front coilover spacers that utilize the factory Coilover shocks. Rear shock options include Performance or Stealth monotube shocks.This Part Fits: Year Make Model Submodel 2016-2018 Chevrolet Silverado 1500 Custom 2014-2018 Chevrolet Silverado 1500 High Country 2015-2018 Chevrolet Silverado 1500 LS 2014-2018 Chevrolet Silverado 1500 LT 2014-2018 Chevrolet Silverado 1500 LTZ 2015-2018 Chevrolet Silverado 1500 SSV 2014-2018 Chevrolet Silverado 1500 WT 2014-2018 GMC Sierra 1500 Base 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLE 2014-2018 GMC Sierra 1500 SLT